近场强震动记录基线校正方法的振动台实验研究

为了获取近场永久位移,通常采用基线校正方法,对近场加速度记录进行基线校正并积分得到永久位移值,但这一结果主观性较强,其可靠性也往往缺乏验证。为了解决这一问题,本文提出了一种能产生包含永久位移振动过程的振动台实验方案,采用振动台加滑动机构的方法,模拟记录到永久位移台站测点的真实振动情况;在实验中分别采用加速度计、摄影测量方法分别直接得到加速度和位移时程,对加速度时程进行基线校正并积分得到位移时程,将其与直接获得的位移时程进行对比,以验证采用基线校正方法的有效性。实验结果表明,在实验室条件下采用现有的基线校正方法校正后,通过积分能得到可以接受的位移时程。     

Analysis and application of the response characteristics of DLL and LWD resistivity in horizontal well

There exist different response characteristics in the resistivity measurements of dual laterolog (DLL) and logging while drilling (LWD) electromagnetic wave propagation logging in highly deviated and horizontal wells due to the difference in their measuring principles. In this study, we first use the integral equation method simulated the response characteristics of LWD resistivity and use the three dimensional finite element method (3D-FEM) simulated the response characteristics of DLL resistivity in horizontal wells, and then analyzed the response differences between the DLL and LWD resistivity. The comparative analysis indicated that the response differences may be caused by different factors such as differences in the angle of instrument inclination, anisotropy, formation interface, and mud intrusion. In the interface, the curves of the LWD resistivity become sharp with increases in the deviation while those of the DLL resistivity gradually become smooth. Both curves are affected by the anisotropy although the effect on DLL resistivity is lower than the LWD resistivity. These differences aid in providing a reasonable explanation in the horizontal well. However, this can also simultaneously lead to false results. At the end of the study, we explain the effects of the differences in the interpretation of the horizontal well based on the results and actual data analysis.     

Study on the simulation of acoustic logging measurements in horizontal and deviated wells

The conventional acoustic logging interpretation method, which is based on vertical wells that penetrate isotropic formations, is not suitable for horizontal and deviated wells penetrating anisotropic formations. This unsuitability is because during horizontal and deviated well drilling, cuttings will splash on the well wall or fall into the borehole bottom and form a thin bed of cuttings. In addition, the high velocity layers at different depths and intrinsic anisotropy may affect acoustic logging measurements. In this study, we examine how these factors affect the acoustic wave slowness measured in horizontal and deviated wells that are surrounded by an anisotropic medium using numerical simulation. We use the staggered-grid finite difference method in time domain (FDTD) combined with hybrid-PML. First, we acquire the acoustic slowness using a simulated array logging system, and then, we analyze how various factors affect acoustic slowness measurements and the differences between the effects of these factors. The factors considered are high-velocity layers, thin beds of cuttings, dipping angle, formation thickness, and anisotropy. The simulation results show that these factors affect acoustic wave slowness measurements differently. We observe that when the wavelength is much smaller than the distance between the borehole wall and high velocity layer, the true slowness of the formation could be acquired. When the wavelengths are of the same order (i.e., in the near-field scenarios), the geometrical acoustics theory is no longer applicable. Furthermore, when a thin bed of cuttings exists at the bottom of the borehole, Fermat's principle is still applicable, and true slowness can be acquired. In anisotropic formations, the measured slowness changes with increments in the dipping angle. Finally, for a measurement system with specific spacing, the slowness of a thin target layer can be acquired when the distance covered by the logging tool is sufficiently long. Based on systematical simulations with different dipping angles and anisotropy in homogenous TI media, slowness estimation charts are established to quantitatively determine the slowness at any dipping angle and for any value of the anisotropic ratio. Synthetic examples with different acoustic logging tools and different elastic parameters demonstrate that the acoustic slowness estimation method can be conveniently applied to horizontal and deviated wells in TI formations with high accuracy.     

基于国普数据的芦山县地震应急基础数据更新及其应用研究

通过研究地理国情普查数据和四川省芦山县地震应急基础数据库的数据类型、数据结构及二者间的关系,完成了地理国情普查数据向芦山县地震应急基础数据的转换与更新;并以芦山地震为例,利用城镇地震应急快速评估系统验证了更新后数据的可靠性。     

多因素控制的城镇地震灾害应急处置模型研究

随着城镇化水平的快速提高,地震灾害高风险暴露城镇数量将不断增加,震后有效的应急处置尤为重要。而当前城镇的地震应急处置主要依据平时制定的地震应急预案开展,缺乏针对性与可操作性。本文以提升城镇地震灾害应急处置能力为目的,总结以往城镇地震应急处置案例,提炼城镇地震灾害应急处置流程,结合城镇特殊的社会经济、自然地理等特点,在分析影响地震灾害应急处置关键因素的基础上,按地震烈度的不同,研究构建了具有区域特征且操作性较强的城镇地震灾害应急处置模型,为城镇地震应急处置的科学化、规范化提供了参考。     

Altitudinal effect of soil <Emphasis Type="Italic">n</Emphasis>-alkane <Emphasis Type="Italic">δ</Emphasis>D values on the eastern Tibetan Plateau and their increasing isotopic fractionation with altitude

Stable isotope paleoaltimetry has provided unprecedented insights into the topographic histories of many of the world’s highest mountain ranges. However, on the Tibetan Plateau (TP), stable isotopes from paleosols generally yield much higher paleoaltitudes than those based on fossils. It is therefore essential when attempting to interpret accurately this region’s paleoaltitudes that the empirical calibrations of local stable isotopes and the relations between them are established. Additionally, it is vital that careful estimations be made when estimate how different isotopes sourced from different areas may have been influenced by different controls. We present here 29 hydrogen isotopic values for leaf wax-derived n-alkanes (i.e., _δD_wax values, and abundance-weighted average δD values of C₂₉ and C₃₁) in surface soils, as well as the δD values of soil water (δD_sw) samples (totaling 22) from Mount Longmen (LM), on the eastern TP (altitude ~0.8–4.0 km above sea level (asl), a region climatically affected by the East Asian Monsoon (EAM). We compared our results with published data from Mount Gongga (GG). In addition, 47 river water samples, 55 spring water samples, and the daily and monthly summer precipitation records (from May to October, 2015) from two precipitation observation stations were collected along the GG transect for δD analysis. LM soil _δD_wax values showed regional differences and responded strongly to altitude, varying from?160‰ to?219‰, with an altitudinal lapse rate (ALR) of?18‰ km^?1 (R ²=0.83; p<0.0001; n=29). These _δD_wax values appeared more enriched than those from the GG transect by ~40‰. We found that both the climate and moisture sources led to the differences observed in soil _δD_wax values between the LM and GG transects. We found that, as a general rule, ε _wax/rw, ε _wax/p and ε _wax/sw values (i.e., the isotopic fractionation of _δD_wax corresponding to δD_rw, δD_p and δD_sw) increased with increasing altitude along both the LM and GG transects (up to 34‰and 50‰, respectively). Basing its research on a comparative study of _δD_wax, δD_p, δD_rw(δD_springw) and δD_sw, this paper discusses the effects of moisture recycling, glacier-fed meltwater, relative humidity (RH), evapotranspiration (ET), vegetation cover, latitude, topography and/or other factors on ε _wax/p values. Clearly, if ε _wax-p values at higher altitudes are calculated using smaller ε _wax-p values from lower altitudes, the calculated paleowaterδD_p values are going to be more depleted than the actual δD values, and any paleoaltitude would therefore be overestimated.     

The subsistence patterns of the Shengedaliang site (~4,000 yr BP) revealed by stable carbon and nitrogen isotopes in northern Shaanxi,China

In order to explore subsistence patterns in northern Shaanxi Province around 4,000 yr BP,28 human and 24 animal bones from the Shengedaliang site were sampled for stable carbon and nitrogen isotope ratio analysis.The results show that most people primarily subsisted on C_4 resources,e.g.millet and millet-related animal products,despite the fact that there was some intake of C_3 plants by some individuals.Stable nitrogen isotope values indicate that there were differences in meat consumption between individuals at the site.Pigs were mainly foddered with millet and millet byproducts,as well as some cattle,according to their highδ~(13)C values.However,most cattle and the sheep/goats consumed wild C_3 plants at Shengedaliang.Our above findings indicates that subsistence patterns in northern Shaanxi around 4,000 yr BP were characterized by millet farming,while the grassland animal husbandry,e.g.cattle and sheep/goats raising,displayed very little contribution to local economy.The intensive millet farming in northern Shaanxi provided enough food for population growth,ensured the accumulation of wealth,and consequently accelerated social differentiation and complexity.     

Effects of fracture intersections on seismic dispersion: theoretical predictions versus numerical simulations

The detection and characterisation of domains of intersecting fractures are important goals in several disciplines of current interest, including exploration and production of unconventional reservoirs, nuclear waste storage, CO₂ sequestration, and groundwater hydrology, among others. The objective of this study is to propose a theoretical framework for quantifying the effects of fracture intersections on the frequency‐dependent elastic properties of fluid‐saturated porous and fractured rocks. Three characteristic frequency regimes for fluid pressure communication are identified. In the low‐frequency limit, fractures are in full pressure communication with the embedding porous matrix and with other fractures. Conversely, in the high‐frequency limit, fractures are hydraulically isolated from the matrix and from other fractures. At intermediate frequencies, fractures are hydraulically isolated from the matrix porosity but can be in hydraulic communication with each other, depending on whether fracture sets are intersecting. For each frequency regime, the effective stiffness coefficients are derived using the linear‐slip theory and anisotropic Gassmann equations. Explicit mathematical expressions for the two characteristic frequencies that separate the three frequency regimes are also determined. Theoretical predictions are then applied to two synthetic 2D samples, each containing two orthogonal fracture sets: one with and another without intersections. The resulting stiffness coefficients, Thomsen‐style anisotropy parameters, and the transition frequencies show good agreement with corresponding numerical simulations. The theoretical results are applicable not only to 2D but also to 3D fracture systems and are amenable to being employed in inversion schemes designed to characterise fracture systems.     

Dynamical features of near-inertial motions in global ocean based on the GDP dataset from 2000 to 2019

Based on the latest oceanic surface drifter dataset from the global drifter program during 2000–2019, this study investigated the global variation of relative frequency shift(RFS), near-inertial energy(NIE) and inverse excess bandwidth(IEB) of near-inertial motions, and analyzed their relations with oceanic mesoscale dynamics, relative vorticity and strain. Compared with previous works, we have some new findings in this study:(1) the RFS was high with negative values in some regions in which we found a significant blue shift of the RFS in the equatorward of 30°N(S) and from 50°N to 60°N in the Pacific, and a red shift in the western boundary currents and their extension regions, the North Atlantic and the Antarctic Circumpolar Current regions;(2) more peak values of the NIE were found in global regions like the South Indian Ocean, the Luzon Strait and some areas of the South Ocean;(3) the global distribution of the IEB were characterized by clear zonal bands and affected by vorticity and wind field;(4)the RFS was elevated as the absolute value of the gradient of vorticity increased, the IEB did not depend on the gradient of vorticity, and the eddy kinetic energy(EKE) weakened with the decrease of the absolute value of RFS;(5) the NIE decreased with increasing absolute value of the relative vorticity and the gradient of vorticity, but it increased with increasing strain and EKE when EKE was larger than 0.003 2 m~2/s~2.     

Current Vertical Motion Analysis of Northwestern Margin of Ordos Based on Precise Leveling

Ordos block was squeezed by the Qinghai-Tibetan block and North China block, and the tectonic activity was intense. In the periphery of Ordos block, there was a series of folds zones and compressed faults with complicate structures. This paper used three-phase data of 1980,1990 and 2014 to calculate vertical velocity of Northwestern margin of Ordos and the analytical results indicated that ① the Hetao basin between the rise of Yinshan fault block and Ordos fault block showed relatively subsidence, in which Linhe basin was the most evident and the subsidence rate was about 2-4mm/a. The subsidence rate of Jartai -Yinchuan rift zone on the western margin of Ordos block was about 2mm/a; ② the whole testing zone exhibited the evident inherited movement characterized by mountain rise and basin subsidence; ③the two leveling section through the northern margin fault and Dengkou-Benjing fault showed that the difference between vertical velocities on two sides of the fault was less than 0.5mm/a.