Dealing with double vagueness in DEM morphometric analysis

A method is presented to explicitly incorporate spatial and scale vagueness – double vagueness – into geomorphometric analyses. Known limitations of usual practices include using a single fixed set of crisp thresholds for morphometric classification and the imposition of a single arbitrary number of scales of analysis to the entire digital elevation model (DEM). Among the advantages of the proposed method are: fuzzification of morphometric classification rules, scale-dependent adaptive fuzzy set parametrization and an objective definition of maximum scale of analysis on a cell-by-cell basis. The method was applied to several DEMs ranging from the ocean floor to surface landscapes of both Earth and Mars. The result was evaluated with respect to modal morphometric features and to characteristic scales, suggesting a more robust method for deriving both morphometric classifications and terrain attributes. We argue that the method would be preferable to any single-scale crisp approach, at least in the context of preliminary hands-off morphometric analyses of DEMs.     

Why do certain species dominate? What we can learn from a rare case of Microdictyon dominance on a Caribbean reef

Many Caribbean reefs have shifted from coral dominance to macroalgal dominance, often by brown algae such as Dictyota and Lobophora. However, the north side of Cayman Brac in the Cayman Islands is dominated seasonally by the green macroalga Microdictyon (percent cover of Microdictyon is 4% in the winter and ~40% of the reef in the summer), although it is absent from the south side of the island and the remainder of the country. Indeed, Microdictyon is rare in much of the Caribbean, so this situation on Cayman Brac provides an opportunity to investigate the conditions that facilitate its distribution and dominance. The impact of herbivory, competition, nutrient input and other abiotic conditions were examined as factors that could influence the distribution and dominance of Microdictyon. While herbivory or nutrient input are frequently found to be key drivers of benthic community composition on coral reefs, here consumption of Microdictyon by herbivores was low, and thus, the alga was not subject to strong top-down control by herbivory. So, in this case, neither herbivore abundance nor feeding preference appeared to influence the distribution of Microdictyon. Nutrient input was also similar to both sides of the island suggesting nutrients played little role in differential distribution. But, in a controlled transplant experiment where Microdictyon was protected from herbivory and competition, it experienced almost complete mortality (93.3%) when transplanted to the south side, compared to only 11.8% mortality on the north. The south side was exposed to the strongest wave action 92% of the days in our study and was on average a slight, but significant 0.2°C warmer. Thus, these data suggest physical forcing (i.e. wave exposure) is the most likely factor dictating Microdictyon distribution. Conversely, a combination of reduced herbivory and increased competitive strength may explain the seasonal dominance of Microdictyon on the north side of Cayman Brac. Microdictyon was a competitive inferior to the other common algae in winter but increased in competitive strength to equal other species in summer. These results add to the literature on Microdictyon and on the forces impacting benthic community structure of coral reefs.     

Artisanal ceramic factories using wood combustion:A nanoparticles and human health study

The ceramics industry,resulting from developments of modern compounds,is a segment of great influence in worldwide sustainability.Artisanal ceramic factories based on wood combustion have significant risks for the creation and discharge of atmosphere nanoparticles(NPs)and ultra-fine particles(UFPs).At present,there is insufficient recognition on the influence of engineered-NPs on the atmosphere and health.Real improvements are indispensable to diminish contact with NPs.The present study demonstrates the main NPs and UFPS present in an area of intense artisanal wood-combustion ceramic manufacturing.Particulate matter was sampled for morphological,chemical,and geochemical studies by sophisticated electron microbeam microscopy,X-Ray Diffraction,and Raman spectroscopy.From NPs configuration(<10 nm)we identify nucleation.Several amorphous NPs(>10 nm)were produced around the studied artisanal ceramic factories.This study presents an indication of the recent information on population and work-related contact to NPs in the artisanal ceramic factories and their influence on health.     

Changes in vegetation cover on the Younghusband Peninsula transgressive dunefields (Australia) 1949–2017

Studies have shown that the impact of climate change, human and animal actions on coastal vegetation can turn stabilized dunes into active mobile dunes and vice versa. Yet, the driving factors that trigger vegetation changes in coastal dunes are still not fully understood. In the transgressive dunefields of the Younghusband Peninsula (south-east coast of South Australia) historical aerial photographs show an increase in vegetation cover over the last ~70 years. This study attempts to identify the causes of the changes in vegetation cover (1949 to 2017) observed in a typical section of the coastal dune systems of the Peninsula. Vegetation cover was first estimated for various years using the available historical aerial photography (long-term changes – 1949 to 2017) and recent satellite imagery (short-term annual changes – 2010 to 2017) for the area, and then results were discussed against the observed changes in climatic variables and rabbit density, factors that could have played a role in this transformation. Results of long-term changes show that the vegetation cover has increased significantly from 1949 to 2017, from less than 7% vegetation cover to almost 40%, increasing dune stabilization and forming parabolic dune systems. Periods with the largest growth in vegetation cover (1952-1956 and 2009-2013) coincide with a significant decline in rabbit numbers. Rabbit density was found to be the primary factor linked to the rapid vegetation growth and stabilization of the dunefield, for both decadal long-term (last 68 years) and annual short-term changes (last 8 years). Other factors such as changes in rainfall, aeolian sediment transport, land use practices, and the introduction of invasive plants have apparently played a limited to negligible role in this stabilization process. © 2018 John Wiley & Sons, Ltd.     

An overview of geological originated materials as a trend for adsorption in wastewater treatment

Adsorption is a unit operation widely used for the tertiary treatment of the most diverse effluents,whose mechanism is based on removing recalcitrant compounds from the organic and inorganic origin.In this process,choosing a suitable adsorbent is a fundamental point.This review article focuses on the adsorbents with natural geological origin:minerals,clays,geopolymers,and even wastes resulted from mining activity.Therefore,over 450 articles and research papers were explored.These materials’main sources are described,and their characteristics,composition,and intrinsic properties are related to adsorption.Herein,we discuss the effects of several process parameters,such as p H,temperature,pollutant,and adsorbent concentration.Furthermore,equilibrium,kinetics,and thermodynamic aspects are also addressed,and relevant regeneration prospects and final disposal.Finally,some suggestions and perspectives on applying these adsorbents in wastewater treatment are presented as future trends.     

A Variable Mesh Spacing for Large-Eddy Simulation Models in the Convective Boundary Layer

A variable vertical mesh spacing for large-eddy simulation (LES) models in a convective boundary layer (CBL) is proposed. The argument is based on the fact that in the vertical direction the turbulence near the surface in a CBL is inhomogeneous and therefore the subfilter-scale effects depend on the relative location between the spectral peak of the vertical velocity and the filter cut-off wavelength. From the physical point of view, this lack of homogeneity makes the vertical mesh spacing the principal length scale and, as a consequence, the LES filter cut-off wavenumber is expressed in terms of this characteristic length scale. Assuming that the inertial subrange initial frequency is equal to the LES filter cut-off frequency and employing fitting expressions that describe the observed convective turbulent energy one-dimensional spectra, it is feasible to derive a relation to calculate the variable vertical mesh spacing. The incorporation of this variable vertical grid within a LES model shows that both the mean quantities (and their gradients) and the turbulent statistics quantities are well described near to the ground level, where the LES predictions are known to be a challenging task.     

The effect of oxygen fugacity on the partitioning of Re between crystals and silicate melt during mantle melting

Interpretation of Re-Os isotopic systematics applied to mantle and mantle-derived rocks is currently hindered by the poorly understood behaviour of Re and Os during partial melting. Of particular interest is the incompatibility of Re and how it partitions between melt and the different mantle phases. Here, we study the partitioning behaviour of Re between the common upper mantle minerals (garnet, spinel, clinopyroxene, orthopyroxene, and olivine) and silicate melt under temperature (1275-1450 °C) and pressure (1.5-3.2 GPa) conditions relevant for basaltic magma genesis, over a range of oxygen fugacity (?O₂) large enough (QFM+5.6 to QFM−2.9) to demonstrate the effects of changing the oxidation state of Re from 4+ to 6+. Rhenium crystal/silicate-melt partition coefficients vary by 4-5 orders of magnitude, from moderately compatible to highly incompatible, for pyroxenes, garnet, and spinel as the oxidation state of Re changes from 4+ to 6+, but Re in either oxidation state is incompatible in olivine. Because the changeover from the one Re oxidation state to the other occurs over the range of ?O₂s pertinent to partial melting in the Earth’s mantle, bulk Re crystal/silicate-melt partition coefficients during mantle melting are also expected to vary significantly according to the oxidation state of the system. For instance, assuming QFM−0.7 and QFM+1.6 as average ?O₂ for mid-ocean ridge (MORBs) and island arc (IABs) basalts, respectively, a difference of at least one order of magnitude for bulk Re partition coefficients is expected (excluding any influence from a sulphide phase). Hence, Re is probably much more incompatible during the genesis of IABs compared to MORBs. Our results also demonstrate that Re⁴⁺ has a partitioning behaviour similar to Ti⁴⁺ rather than Yb, and is accordingly not a sensitive indicator of garnet in the source. The lower concentrations of Re observed in ocean island basalts (OIBs) compared to MORBs are therefore not a result of being generated deeper in the mantle where garnet is stable, leaving the hypothesis of late-stage loss of Re from OIB lavas by degassing as the most plausible explanation.     

Realistic modelling of shelf-estuary regions

A very high-resolution modelling configuration was created for the estuary of Baía de Todos os Santos – BTS, Brazil (300 to 400 m), and adjacent coastal waters (600 to 1200 m). The adoption of a multi-corner domain approach allowed the variable spatial resolution required to resolve the shelf, the bay and their interactions. Seven years were simulated using realistic oceanic, atmospheric and riverine forcing. Model validation was done against observations showing the model skill to reproduce the thermohaline field, the tidal currents, as well as the variability of the free surface at tidal and sub-tidal time scales. The results provide the first representation of the tidal wave propagation along the bay, in terms of maps of amplitudes, phases and ellipses of the barotropic currents for the main tidal constituents. By analysing the residual currents at different depths, in terms of averages over the simulation period, several prominent structures were identified and named: (i) Salvador eddy (up to 0.2 m s⁻¹); (ii) St Antonio current (up to 0.45 m s⁻¹); (iii) Salvador current (up to 0.5 m s⁻¹); (iv) Itaparica eddy (up to 0.2 m s⁻¹); (v) Ilha dos Frades southern eddy (up to 0.1 m s⁻¹); and (vi) Ilha dos Frades northern eddy (up to 0.2 m s⁻¹). The model set-up proved to be highly efficient and robust simulating the BTS shelf-estuary region and such an approach may be suitable to other estuarine systems.

     

Phase-equilibrium geobarometers for silicic rocks based on rhyolite-MELTS. Part 1: Principles,procedures, and evaluation of the method

Constraining the pressure of crystallization of magmas is an important but elusive task. In this work, we present a method to derive crystallization pressures for rocks that preserve glass compositions (either glass inclusions or matrix glass) representative of equilibration between melt, quartz, and 1 or 2 feldspars. The method relies on the well-known shift of the quartz–feldspar saturation surface toward higher normative quartz melt compositions with decreasing pressure. The critical realization for development of the method is the fact that melt, quartz and feldspars need to be in equilibrium at the liquidus for the melt composition. The method thus consists of calculating the saturation surfaces for quartz and feldspars using rhyolite-MELTS over a range of pressures, and searching for the pressure at which the expected assemblage (quartz+1 feldspar or quartz+2 feldspars) is found at the liquidus. We evaluate errors resulting from uncertainties in glass composition using a series of Monte Carlo simulations for a quartz-hosted glass inclusion composition from the Bishop Tuff, which reveal errors on the order of 20–45 MPa for the quartz+2 feldspars constraint and on the order of 25–100 MPa for the quartz+1 feldspar constraint; we suggest actual errors are closer to the lower bounds of these ranges. We investigate the effect of fluid saturation in two ways: (1) By applying our procedure over a range of water contents for three glass compositions; we show that the effect of fluid saturation is more important at higher pressures (~300 MPa) than at lower pressures (~100 MPa), but reasonable pressure estimates can be derived irrespective of fluid saturation for geologically relevant H₂O concentrations >3 wt% and (2) by performing the same type of pressure determinations with a preliminary version of rhyolite-MELTS that includes a H₂O–CO₂ mixed fluid phase; we use a range of H₂O and CO₂ concentrations for two compositions characteristic of early-erupted and late-erupted Bishop Tuff glass inclusions and demonstrate that calculated pressures are largely independent of CO₂ concentration (for CO₂ <1,000 ppm), at least for relatively high H₂O contents, as expected in most natural magmas, such that CO₂ concentration can be effectively neglected for application of our method. Finally, we demonstrate that pressures calculated using the rhyolite-MELTS geobarometer compare well with those resulting from H₂O–CO₂ glass inclusion barometry and Al-in-hornblende barometry for an array of natural systems for which data have been compiled from the literature; the agreement is best for quartz-hosted glass inclusions, while matrix glass yields systematically lower rhyolite-MELTS pressures, suggestive of melt evolution during eruptive decompression.