Interaction of Haematopoietic Tissue Cultures of the Dublin Bay Prawn,Nephrops Norvegicus(L.),with the Causal Agent of Luminous Vibriosis Vibrio Harveyi

Vibrio harveyi cells (dose = ＞ 103 cells mL 1) and extracellular products (ECP; ＞25μg m L-1 of total protein concentration) destroyed haematopoietic cultures of Nephrops norvegicus within 24 h of exposure. Cytopathic effects (CPE)started after 4 h of exposure to the bacterial cells, with some granularity in the cytoplasm, mostly in cells in the outer periphery of the explant growth. At the end of the infection, a considerable number of nuclei remained attached to the substrate,apparently unaffected. Following exposure to ECP, initial deterioration was observed at 2 h with the presence of granularity in the cytoplasm of＜ 20% cells, and few cells displayed small vacuoles around the nuclei. Parallel results were obtained using whole animal experiments, with V. harveyi cells being lethal to nephrops within 24 h.     

Evidence for a 200 km thick diamond-bearing root beneath the Central Mackenzie Valley,Northwest Territories,Canada? Diamond indicator mineral geochemistry from the Horn Plateau and Trout Lake regions

The Central Mackenzie Valley (CMV) area of Northwest Territories is underlain by Precambrian basement belonging to the North American Craton. The potential of this area to host kimberlitic diamond deposits is relatively high judging from the seismologically-defined lithospheric thickness, age of basement rocks (2.2–1.7 Ga) and presence of kimberlite indicator minerals (KIMs) in Quaternary sediments. This study presents data for a large collection of KIMs recovered from stream sediments and till samples from two study areas in the CMV, the Horn Plateau and Trout Lake. In the processed samples, peridotitic garnets dominate the KIM grain count for both regions (> 25% each) while eclogitic garnet is almost absent in both regions (< 1% each). KIM chemistry for the Horn Plateau indicates significant diamond potential, with a strong similarity to KIM systematics from the Central and Western Slave Craton. The most significant issue to resolve in assessing the local diamond potential is the degree to which KIM chemistry reflects local and/or distal kimberlite bodies. Radiogenic isotope analysis of detrital kimberlite-related CMV ilmenite and rutile grains requires at least two broad age groups for eroded source kimberlites. Statistical analysis of the data suggests that it is probable that some of these KIMs were derived from primary and/or secondary sources within the CMV area, while others may have been transported to the area from the east-northeast by Pleistocene glacial and/or glaciofluvial systems. At this stage, KIM chemistry does not allow the exact location of the kimberlitic source(s) to be constrained.

     

Chromite in komatiites: 3D morphologies with implications for crystallization mechanisms

High-resolution X-ray computed tomography has been carried out on a suite of komatiite samples representing a range of volcanic facies, chromite contents and degrees of alteration and metamorphism, to reveal the wide range of sizes, shapes and degrees of clustering that chromite grains display as a function of cooling history. Dendrites are spectacularly skeletal chromite grains formed during very rapid crystallization of supercooled melt in spinifex zones close to flow tops. At slower cooling rates in the interiors of thick flows, chromite forms predominantly euhedral grains. Large clusters (up to a dozen of grains) are characteristic of liquidus chromite, whereas fine dustings of mostly individual ~20-μm grains form by in situ crystallization from trapped intercumulus liquid. Chromite in coarse-grained olivine cumulates from komatiitic dunite bodies occurs in two forms: as clusters or chains of euhedral crystals, developing into “chicken-wire” texture where chromite is present in supra-cotectic proportions; and as strongly dendritic, semi-poikilitic grains. These dendritic grains are likely to have formed by rapid crescumulate growth from magma that was close to its liquidus temperature but supersaturated with chromite. In some cases, this process seems to have been favoured by nucleation of chromite on the margins of sulphide liquid blebs. This texture is a good evidence for the predominantly cumulus origin of oikocrysts and in situ origin of heteradcumulate textures. Our 3D textural analysis confirms that the morphology of chromite crystals is a distinctive indicator of crystallization environment even in highly altered rocks.     

Flow network derivation from a high resolution DEM in a low relief,agrarian landscape

Digital flow networks derived from digital elevation models (DEMs) sensitively react to errors due to measurement, data processing and data representation. Since high‐resolution DEMs are increasingly used in geomorphological and hydrological research, automated and semi‐automated procedures to reduce the impact of such errors on flow networks are required. One such technique is stream‐carving, a hydrological conditioning technique to ensure drainage connectivity in DEMs towards the DEM edges. Here we test and modify a state‐of‐the‐art carving algorithm for flow network derivation in a low‐relief, agricultural landscape characterized by a large number of spurious, topographic depressions. Our results show that the investigated algorithm reconstructs a benchmark network insufficiently in terms of carving energy, distance and a topological network measure. The modification to the algorithm that performed best, combines the least‐cost auxiliary topography (LCAT) carving with a constrained breaching algorithm that explicitly takes automatically identified channel locations into account. We applied our methods to a low relief landscape, but the results can be transferred to flow network derivation of DEMs in moderate to mountainous relief in situations where the valley bottom is broad and flat and precise derivations of the flow networks are needed. Copyright © 2013 John Wiley & Sons, Ltd.     

Holocene alluvial environments at Barking,Lower Thames Valley (London,UK)

Deposit modelling based on archived borehole logs supplemented by a small number of dedicated boreholes is used to reconstruct the main boundary surfaces and the thickness of the main sediment units within the succession of Holocene alluvial deposits underlying the floodplain in the Barking Reach of the Lower Thames Valley. The basis of the modelling exercise is discussed and the models are used to assess the significance of floodplain relief in determining patterns of sedimentation. This evidence is combined with the results of biostratigraphical and geochronological investigations to reconstruct the environmental conditions associated with each successive stage of floodplain aggradation. The two main factors affecting the history and spatial pattern of Holocene sedimentation are shown to be the regional behaviour of relative sea level and the pattern of relief on the surface of the sub-alluvial, Late Devensian Shepperton Gravel. As is generally the case in the Lower Thames Valley, three main stratigraphic units are recognised, the Lower Alluvium, a peat bed broadly equivalent to the Tilbury III peat of Devoy (1979) and an Upper Alluvium. There is no evidence to suggest that the floodplain was substantially re-shaped by erosion during the Holocene. Instead, the relief inherited from the Shepperton Gravel surface was gradually buried either by the accumulation of peat or by deposition of fine-grained sediment from suspension in standing or slow-moving water. The palaeoenvironmental record from Barking confirms important details of the Holocene record observed elsewhere in the Lower Thames Valley, including the presence of Taxus in the valley-floor fen carr woodland between about 5000 and 4000 cal BP, and the subsequent growth of Ulmus on the peat surface.     

Post-revanchist cities?

This intervention focuses on how national-level rhetoric aimed at impugning “others” has thrived of late, but how concomitantly 1990s-style urban revanchism has faded in cities that were once punitive crucibles against the homeless. Using Los Angeles as case study, I argue that the recent trend has been to grudgingly support the homeless, increasingly via taxpayer initiatives, leading to a potential but stymied post-revanchist city. If the spirit of revanchism remains, it is through the persistent NIMBY opposition to housing the homeless.     

Airborne Laser Sensing of Scottish Coastal Waters

An Nd:YAG-based airborne lidar system has been used to measure the optical properties of littoral waters off the northwest Scottish coast. The small-scale structure of subsurface scattering layers was also investigated. Methods of solving the Lidar Sensing Equation in the single scattering approximation are described and the values of the derived extinction indices presented. The extinction index averaged over a series of five flights to the northeast of the Gulf Stream was k = 0.224 m -1 with a standard deviation of 0.212 m -1 . Further, it was demonstrated that, in coastal waters, optical inhomogeneities with dimensions between 50 m and 200 km obey the power law Sp k ~ k -P with the parameter P close to two. In turbid or transparent areas, the water extinction index can change by several tenths of a percent with respect to the surrounding water mass. This suggests that the observed nonmonotonic behavior of the power spectra of the water extinction index fluctuations is caused by the outer scale of turbulence, in particular, by the bottom depth at the measurement site.     

Performance evaluation of three DEM‐based fluvial terrace mapping methods

The availability of high‐resolution digital elevation models (DEMs) derived from airborne light detection and ranging (LiDAR) surveys has spurred the development of several methods to identify and map fluvial terraces. The post‐glacial landscape of the Sheepscot River watershed, Maine, where land‐use change has produced fill terraces upstream of historic dam sites, was selected to implement a comparison between terrace mapping methodologies. At four study sites within the watershed, terraces were manually mapped on LiDAR‐DEM‐derived hillshade images to facilitate the comparison among fully and semi‐automated DEM‐based procedures, including: (1) spatial relationships between interpreted terraces and surrounding natural topography, (2) feature classification algorithms, and (3) the TerEx terrace mapping toolbox. Each method was evaluated based on its accuracy and ease of implementation. The four study sites have varying longitudinal slope (0.0008–0.006 m/m), channel width (< 5–30 m), surrounding landscape relief (20–80 m), type and density of surrounding land use, and mapped surficial geologic units. All methods generally overestimate terrace areas (average predicted area 210% of manually defined area) with the most accurate results achieved within confined river valleys surrounded by the steep hillslopes. Accuracy generally decreases for study sites surrounded by low‐relief landscapes (predicted areas ranged 4–953% of manual delineations). We conclude with the advantages and drawbacks of each method tested and make recommendations for the scenarios where the use of each method is most appropriate. Copyright © 2016 John Wiley & Sons, Ltd.     

A Climatic Sequence Stratigraphic Model in the Terrestrial Lacustrine Basin:A Case Study of Green River Formation,Uinta Basin,USA

In recent years,with the development of terrestrial sequence stratigraphy,more attention has been focused on the study of the terrestrial lacustrine sequence stratigraphic model globally. Different viewpoints are preferred by researchers.Under the guidance of the theory of sequence stratigraphy,the findings of this paper indicate that climate is a major factor controlling the formation of the fourth-order sequence,based upon the study of the sequence stratigraphy in the Green River Formation of the Uinta...