Investigation of the instability of graveyard orbits due to the earth's gravitational perturbations

Summary The Banach theorem is applied to the Lagrange planetary equation for the semimajor axis of a geostationary satellite orbit to estimate the stability of near-geostationary satellite orbits. To achieve a graveyard (disposal) orbit, which will not interfere (=cross) the initial geostationary orbit, the geostationary semi-major axis a_g have to be increased at least by 50 km. Numerical results for a variety of graveyard orbits show that the increase of a_g by about 100 km will yield sufficiently stable orbits (accounting for the Earth's gravitational perturbations only) during the next 150 years.Dedicated to the 75th Birthday of Professor Academician Tibor Kolbenheyer     

High-density CO2−N2 inclusions in eclogite-facies metasediments of the Münchberg gneiss complex,SE Germany

The eclogite-facies metasedimentary rocks in the Münchberg gneiss complex (T=630±30° C/P17–24 kbar) locally contain CO₂–N₂-rich fluid inclusions of extremely low molar volumes (32 cm³/mol) in quartz. These fluid compositions are mainly found in rocks intercalated with calcsilicate bands. Densities were determined from low-temperature phase transitions like stable or metastable homogenization (L+VL), partial homogenization (S+L+VS+L) and the transition S+LL (L = liquid, V = vapour, S = solid). The high fluid densities are in agreement with eclogite-facies pressure and temperature and subsequent amphibolite facies. CO₂–N₂ inclusions were not observed in adjacent eclogites nor in non-calcareous metasediments. These rock types contain predominantly H₂O-rich inclusions correlating with amphibolite-facies conditions. The variation of fluid composition with lithological differences indicates local fluid gradients and speaks against a pervasive fluid flow during eclogite-facies metamorphism.     

Magmatic evolution of the Karmøy Ophiolite Complex,SW Norway: relationships between MORB-IAT-boninitic-calc-alkaline and alkaline magmatism

The polyphasal magmatic evolution of the Caledonian Karmøy Ophiolite Complex includes: (1) formation of an axis sequence from island-arc tholeiitic (IAT) and more MORB-like magmas (493+7/-4 Ma); (2) intrusion of magmas of boninitic affinity (485±2 Ma); (3) intrusion of MORB- and IAT-like magmas; (4) intrusion and extrusion of calc-alkaline magmas (470+9/-5 Ma); (5) intrusion and extrusion of basalts with alkaline trace-element affinity. Repeated intrusion of MORB and IAT-like magmas may be explained by intermittent magmatism involving magma-chamber solidification and remelting of a source characterized by initial _Nd of approximately +6.5. The boninitic rocks may have formed from two LREE-depleted sources: the primary source of the axis-sequence magmas and the residual source left after extraction of these magmas. These sources have been enriched in LREE, Th and Zr from subducted material exhibiting a continental Nd-isotope signature with initial _Nd less than-8. Covariation between _Nd and Th, Zr, Nd, Y and Yb may be explained by metasomatic enrichment of a LREE-depleted mantle source by a LREE-enriched subduction component, followed by partial melting during which the degree of melting of the metasomatized mantle source increased linearly with the amount of subduction component added to the mantle source. The calc-alkaline magmas may have formed by remelting of a highly depleted source, which became enriched in some trace elements derived from the source of the subsequent alkaline magmatism. The geology and geochemistry of the Karmøy Ophiolite Complex suggest growth of an island-arc upon newly-formed oceanic crust, followed by arc-splitting and the development of a new basin.     

Type IV dm bursts: Onset and sudden reductions

The effect of collisions of suprathermal electrons with a thermal background plasma is investigated and is shown to cause flattening of a monotonically descending velocity distribution of fast particles. As a result flare-produced energetic electrons that are trapped in a coronal magnetic arch and that are initially distributed in energy according to a power-law, can give rise to an instability of Langmuir waves in the background plasma and the subsequent emission of continuum radiation as observed in type IV dm bursts.To explain the appearance of sudden reductions observed in type IV dm outbursts the effects both of magnetic compressions of the source region and of renewed injections of fast particles on the continuum source are investigated. It is found that the latter process can explain the observed reductions.     

Acid leaching of ash and coal: Time dependence and trace element occurrences

The leaching of coal and coal/asphaltite/wood-ashes in sulfuric acid (pH 1.0, 25 °C, S/L, 1:10) was studied as a function of time; acid consumption and extracted metal concentrations are presented. Whole coals consumed acid rapidly during the first few minutes, followed by slow acid consumption. Wood-, lignite-, and asphaltite-ashes consumed acid in two stages, the rapid phase extending < 30 min and the slow phase extended up to 10 days. The rapid phase was dominated by the dissolution of Ca, K and Mg ions for wood-ash, by Ca, Al and Mg ions for lignite-ash and Ca and Mg ions for asphaltite-ash. The sulfur concentration in solution and the concentrations of Ca, Fe, K, Mg, Na, P, Al and Mn in the aqueous phase verified the neutralizing capacity of the untreated ashes as well as the formation of insoluble sulfates in the residues. The slow phase kinetics differed for different fuels and exhibited leaching of several abundant elements—Fe, Al, K, Na and Mn. Trace elements (Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb, Th, U, V, Zn) sometimes required up to 32 h for maximal extraction from ashes. Suggestions are presented regarding the chemical nature of trace elements in the untreated coals and ashes and suitable residence times for economical industrial processes. We think it possible to combine bacteriological oxidation of sulfidic concentrates of acid leaching from ash of various qualities or even whole coals.     

Ductile deformation of garnet in mylonitic gneisses from the Münchberg Massif (Germany)

Mylonitic gneisses from the Münchberg Massif contain single grains (type I) and polycrystalline aggregates (type II) of garnet displaying a distinct elongation parallel to a macroscopic lineation which is interpreted as the result of ductile deformation. Lattice-preferred orientations of quartz (textures) symmetrical to the macroscopic foliation and lineation and the lack of rotational microfabrics indicate that the bulk deformation was pure shear at least during the latest strain increments. Garnet textures measured by EBSD together with microprobe analyses demonstrate that these two structural types of garnet can be related to two different processes of ductile deformation: (1) For the single grains stretching can be attributed to diffusion creep along grain boundary zones (Coble creep). The related mass transfer is indicated by the fact that primary growth zones are cut off at the long faces of the grains while the related strain shadow domains do not show comparable chemical zoning. Pressure solution and precipitation suitable to produce similar structures can be largely ruled out because retrogressive reactions pointing to the presence of free hydrous fluids are missing. (2) For the polycrystalline garnet aggregates consisting of cores grading into fine-grained mantles, dislocation creep and associated rotation recrystallization can be assumed. Continuous lattice rotation from the core to the outer polycrystalline rim allow a determination of the related dominant slip systems which are {100}<010> and equivalent systems according to the cubic lattice symmetry. The same holds for garnets which appear to be completely recrystallized. For this type of fine-grained aggregates an alternative nucleation model is discussed. Due to penetrative dislocation glide in connection with short range diffusion and the resulting lattice rotation, primary growth zones are strongly disturbed.Since for the considered rock unit of the Münchberg Massif peak metamorphic temperatures between 630 and 670 °C can be assumed, this study clearly demonstrates that the inferred processes of ductile garnet deformation can occur not only in HT regimes as often suggested in the literature even if embedded within a matrix of “low-strength” minerals like quartz, feldspars and micas.     

An electrochemical study of pyrite oxidation in the presence of carbon coatings in cyanide medium

The anodic and cathodic behaviour of pyrite with clay and different carbon coatings of activated carbon, graphite and carbonaceous matter in cyanide medium was investigated using the potentiodynamic method. The presence of clay coating did not change the polarisation curve appearance for either the anodic oxidation of pyrite or the cathodic reduction of oxygen or the potential of the current plateau, but only decreased the plateau current especially at a higher coating thickness. The presence of the carbon coatings marginally shifted the rest potential for pyrite to a more anodic position and slightly changed the polarisation curve appearance for pyrite oxidation. The current density for pyrite oxidation largely increased in the presence of the carbon coatings, the potential at the plateau shifted to more cathodic positions, and the plateau width became smaller. These effects became more noticeable at a higher coating thickness. The activated carbon, graphite and carbonaceous matter coatings performed similarly in affecting pyrite oxidation at a similar thickness. The carbon coatings significantly increased the limiting current densities for oxygen reduction on pyrite, and the limiting current plateau became steeper at a higher coating thickness. The carbon coatings increased the limiting current density for oxygen reduction to a similar extent at a low coating thickness, but increased to varied extents at a higher coating thickness. The carbon coatings also greatly increased the cathodic current density for gold reduction on pyrite. The enhancement of pyrite oxidation and oxygen or gold reduction on pyrite by the carbon coatings was likely attributed to the electrochemical interaction between pyrite and the carbon materials with electron-rich surfaces and high conductivity. The presence of the carbon coatings significantly increased the oxidation of pyrite in aerated cyanide solutions and the preg-robbing of pyrite especially at a higher coating thickness.     

Visualization experiments of iron precipitates: Application for in-situ arsenic remediation

Laboratory experiments were carried out to acquire more insight and understanding of the phenomena associated with the in-situ arsenic remediation. Visualization techniques are the most informative for the detection of Fe(II) while flowing in soils. Green Rust (GR) was considered as representative of in-situ iron precipitates. In a visualization flat cell, the change in color of GR to orange, due to oxidation, was monitored by a digital camera and the images were analyzed giving the spatial and temporal distribution of Fe(II). Moreover, both oxygen and pH changes in time were recorded in two sections along the flow direction in the cell. The measured and calculated concentration profiles were compared and the actual reaction rates were predicted. The reaction rate constants measured in this study, under flowing conditions, are in a good agreement with the values obtained from batch experiments reported in the literature.     

Developments in the characterisation of waste materials for environmental impact assessment purposes

The characterisation of waste is entering a new phase with the latest developments of characterisation leaching tests and associated modelling capabilities. The currently applied too simple testing approaches lead to poor choices in waste management. With the increased insight in release controlling processes chemical speciation aspects can be addressed even in the most complex and heterogeneous waste materials. From a composition perspective materials may be highly variable, but often materials are far more consistent in their leaching behaviour. This aspect should be exploited more extensively as it holds the key to treat waste materials in such a way that long term solutions are achieved rather than reaching temporary gains.     

Comparison of soil solution chemistry sampled by centrifugation, two types of suction lysimeters and zero-tension lysimeters

The choice of sampling method for soil solution is of great importance. In this paper soil solution chemistry sampled by centrifugation, two types of suction lysimeters and zero-tension lysimeters have been studied with the purpose of investigating systematic differences between them. The samples were taken at 4 depths from an acidified forest soil as well as from adjacent lime and ash treated soils. A centrifugation drainage method was compared with two types of suction lysimeters (‘Rhizon’ and ‘Prenart’) and zero-tension lysimeters. About half of the 27 variables measured showed a significant difference between the sampling methods used. Typically the centrifuged samples had lower pH (4.0 vs. 4.4), Ca (21 μM vs. 30 μM) and Mg (25 μM vs. 34 μM) concentrations and higher Cl (330 μM vs. 230 μM) and DOC (4.4 mM vs. 3.2 mM) concentrations than the Rhizon lysimeters. Also the other lysimeters showed significant differences compared to the centrifuged samples for about half the number of analytes. Centrifuged samples had higher concentrations of all analytes except NO₃ and PO₄ compared to zero-tension lysimeters and also for all analytes except NO₃ and Al compared to Prenart lysimeters. Among the environmental factors considered depth showed an influence to some extent, while sampling occasion had a great significant impact on the difference between the centrifugation method and the Rhizon lysimeters. Factors like individual pits or soil treatment did not show any influence on the difference between the methods.