Constructing the Coronal Magnetic Field By Correlating Parameterized Magnetic Field Lines With Observed Coronal Plasma Structures

A method is presented for constructing the coronal magnetic field from photospheric magnetograms and observed coronal loops. A set of magnetic field lines generated from magnetogram data is parameterized and then deformed by varying the parameterized values. The coronal flux tubes associated with this field are adjusted until the correlation between the field lines and the observed coronal loops is maximized. A mathematical formulation is described which ensures that (i) the normal component of the photospheric field remains unchanged, (ii) the field is given in the entire corona over an active region, (iii) the field remains divergence-free, and (iv) electric currents are introduced into the field. It is demonstrated that a parameterization of a potential field, comprising a radial stretching of the field, can provide a match for a simple bipolar active region, AR 7999, which crossed the central meridian on 1996 November 26. The result is a non-force-free magnetic field with the Lorentz force being of the order of 10^–5.5 g cm s^–2 resulting from an electric current density of 0.079 A m^–2. Calculations show that the plasma beta becomes larger than unity at a relatively low height of 0.25 r supporting the non-force-free conclusion. The presence of such strong non-radial currents requires large transverse pressure gradients to maintain a magnetostatic atmosphere, required by the relatively persistent nature of the coronal structures observed in AR 7999. This scheme is an important tool in generating a magnetic field solution consistent with the coronal flux tube observations and the observed photospheric magnetic field.     

Hydrated minerals on Europa’s surface: An improved look from the Galileo NIMS investigation

The surface composition of Europa is of great importance for understanding both the internal evolution of Europa and its putative ocean. The Near Infrared Mapping Spectrometer (NIMS) investigation on Galileo observed Europa and the other Galilean satellites from 0.7 to 5.2 μm with spatial resolution down to a few kilometers during flybys by the spacecraft as it orbited Jupiter. These data have been analyzed and results published over the life of the Galileo mission and afterward. One result was the discovery of hydrated minerals at some locations on Europa and Ganymede. The data are noisy, especially for Europa, due to radiation affecting the NIMS electronics and detectors, and other artifacts are also present. The NIMS data are now being reprocessed using the accumulated knowledge gained over the entire missions to remove noise spikes and compensate for some other defects in the data. We are analyzing these reprocessed data in an attempt to defined better the nature of the hydrate spectral features and improve their interpretation. We report here on analyses of two NIMS reprocessed observations for the 0.7-3-μm region. A revised hydrate spectrum is calculated and mapped in detail across two lineaments. The spectrum shows the expected distorted water features but little or no spectral structure in these features. A narrow, weak spectral feature appears at 1.344 μm, which is weakly correlated with lower albedo. Several other weak features may be present but are difficult to confirm in these limited data sets. The hydrate signature shows the greatest strength within and toward the center of the lineaments, confirming and strengthening the association of the hydrate with these endogenic features. This trend may indicate that the material in the lineaments is youngest toward the center and has more water frost coverage toward the edge. A small, visually dark, circular feature has a spectrum that shows both hydrate and crystalline water ice features and perhaps contains a hydrate different in spectral characteristics and perhaps composition than found in the lineament.     

Plasma Beta above a Solar Active Region: Rethinking the Paradigm

In this paper, we present a model of the plasma beta above an active region and discuss its consequences in terms of coronal magnetic field modeling. The -plasma model is representative and derived from a collection of sources. The resulting variation with height in the solar atmosphere is used to emphasize that the assumption that the magnetic pressure dominates over the plasma pressure must be carefully employed when extrapolating the magnetic field. This paper points out (1) that the paradigm that the coronal magnetic field can be constructed from a force-free magnetic field must be used in the correct context, since the force-free region is sandwiched between two regions which have >1, (2) that the chromospheric Mgii–Civ magnetic measurements occur near the -minimum, and (3) that, moving from the photosphere upwards, can return to 1 at relatively low coronal heights, e.g., R1.2 R _s.     

A Single Packer Method for Characterizing Water Contributing Fractures in Crystalline Bedrock Wells

Water levels and water quality of open borehole wells in fractured bedrock are flow-weighted averages that are a function of the hydraulic heads and transmissivities of water contributing fractures, properties that are rarely known. Without such knowledge using water levels and water quality data from fractured bedrock wells to assess groundwater flow and contaminant conditions can be highly misleading. This study demonstrates a cost-effective single packer method to determine the hydraulic heads and transmissivities of water contributing fracture zones in crystalline bedrock wells. The method entails inflating a pipe plug to isolate sections of an open borehole at different depths and monitoring changes in the water level with time. At each depth, the change in water level with time was used to determine the sum of fracture transmissivities above the packer and then to solve for individual fracture transmissivity. Steady-state wellbore heads along with the transmissivities were used to determine individual fracture heads using the weighted average head equation. The method was tested in five wells in crystalline bedrock located at the University of Connecticut in Storrs. The single packer head and transmissivity results were found to agree closely with those determined using conventional logging methods and the dissolved oxygen alteration method. The method appears to be a simple and cost-effective alternative in obtaining important information on flow conditions in fractured crystalline bedrock wells.     

Tar ball frequency data and analytical results from a long-term beach monitoring program

Following the spill of fuel oils from the New Carissa in February 1999, approximately 300 km of beaches on the Pacific coast of North America were surveyed. A long-term observation program focused on the documentation of stranded tar balls in the vicinity of the spill site. Systematic beach surveys which were conducted over the period March 1999 to April 2001 and semi-logarithmic scale, time-series plots proved the most useful format for identifying trends. Beach monitoring continued through to August 2001. by which time 212 tar balls had been analyzed by GC/MS for their chemical characteristics. The samples of tar balls collected between February 1999 and August 2001 were qualitatively compared with New Carissa source oils (NCSO) and 101 (48%) were not consistent with NSCO. The presence of tar balls that are not related to an incident can confound attempts to define cleanup or endpoint criteria and to assess possible injury to natural resources.     

Hydrogen fluence in Genesis collectors: Implications for acceleration of solar wind and for solar metallicity

NASA's Genesis mission was flown to capture samples of the solar wind and return them to the Earth for measurement. The purpose of the mission was to determine the chemical and isotopic composition of the Sun with significantly better precision than known before. Abundance data are now available for noble gases, magnesium, sodium, calcium, potassium, aluminum, chromium, iron, and other elements. Here, we report abundance data for hydrogen in four solar wind regimes collected by the Genesis mission (bulk solar wind, interstream low‐energy wind, coronal hole high‐energy wind, and coronal mass ejections). The mission was not designed to collect hydrogen, and in order to measure it, we had to overcome a variety of technical problems, as described herein. The relative hydrogen fluences among the four regimes should be accurate to better than ±5–6%, and the absolute fluences should be accurate to ±10%. We use the data to investigate elemental fractionations due to the first ionization potential during acceleration of the solar wind. We also use our data, combined with regime data for neon and argon, to estimate the solar neon and argon abundances, elements that cannot be measured spectroscopically in the solar photosphere.     

Radio observations of the M8.1 solar flare of 23 June, 1988: Evidence for energy transport by thermal processes

The Very Large Array (VLA) and the frequency agile interferometer at the Owens Valley Radio Observatory (OVRO) were used to observe the M8.1 flare of 23 June, 1988. The VLA obtained images prior to and during the flare at 333 MHz, and at 1.5 and 4.7 GHz. The frequency agile interferometer at Owens Valley obtained interferometer amplitude and total power spectra of the flare at 45 frequencies between 1 and 18 GHz. The observations were supplemented by radiometer measurements made by the USAF RSTN network site at Palehua, HI, by GOES soft X-ray observations, by USAF SOON H filtergrams, and by a KPNO photospheric magnetogram.The radio data reveal a wide variety of phenomena, including: (i) a multiply impulsive microwave burst that is essentially thermal in character; (ii) stationary discrete components at 1.5 GHz, associated temporally and spatially with distant brightenings in Ha; (iii) a dynamical component at 1.5 GHz associated with hot plasma moving subsonically into the corona; (iv) the appearance of intense, short-lived, decimetric burst activity near the lead sunspot in the active region at 1.5 GHz, indicative of a high degree of inhomogeneity in the source.The unusually complete radio coverage allows us to investigate the transport of energy from the initial site to sites of distant H brightenings. The transport of energy appears to be most consistent with slow, thermal processes, rather than rapid transport by nonthermal electron beams.     

The extent of temporal smearing in surface-temperature histories derived from borehole temperature measurements

The ability of borehole temperature data to resolve past climatic events is investigated using Backus-Gilbert inversion methods. Two experimental approaches are considered: (1) the data consist of a single borehole temperature profile, and (2) the data consist of climatically-induced temperature transients measured within a borehole during a monitoring experiment. The sensitivity of the data's resolving power to the vertical distribution of the measurements, temperature measurement errors, the inclusion of a local meteorological record, and the duration of a monitoring experiment, are investigated. The results can be used to help interpret existing surface temperature histories derived from borehole temperature data and to optimize future experiments for the detection of climatic signals.