俯冲-碰撞带硼循环

俯冲带控制着地球内部和表层的物质与能量交换.硼(B)是一个质量轻的流体活动性元素.B及其同位素体系是理解俯冲-碰撞带流/熔体活动和物质循环的重要工具.本文综述了俯冲板块中各储库的硼含量和同位素组成以及主导硼分配的关键矿物.介绍了目前对大洋俯冲带弧前、弧下和弧后深度下硼循环的主要认识;简要介绍了刚起步的大陆俯冲-碰撞带硼循环研究.阐述了含电气石(超)高压变质岩在俯冲带硼迁移研究中的重要性.指出今后需深化含水矿物在不同地温梯度下脱水/熔融过程中硼同位素分馏研究,加强流/熔体包裹体硼同位素分析技术及应用研究.由于B及同位素可有效区分大洋地壳和大陆地壳物质,未来将在造山带演化和地球深部物质循环研究中扮演更重要的角色.     

特提斯喜马拉雅铅锌锑金成矿带含炭质岩石中热液脉型矿床的综合电法勘探——以西藏扎西康铅锌锑多金属矿为例

扎西康铅锌锑多金属矿床产出于特提斯喜马拉雅炭质板岩的断裂带内,是特提斯喜马拉雅铅锌锑金成矿带内典型的热液脉型矿床。由于含炭质岩石和金属硫化物都呈现出相似的低阻高极化电性特征,加之热液脉型矿床的矿体普遍较小,使得在含炭质岩石中对金属硫化物矿体进行电法勘探存在较大困难。本文通过对扎西康矿床已知矿体的音频大地电磁测深和激电中梯测量,发现矿区的炭质板岩呈现低电阻率(10^-0.4~10⁰Ω·m)和高极化率(9%~20%)特征,而矿体呈现出高电阻率(10²~10³Ω·m)和低极化率(1%~5%)的特征。经研究分析,认为造成这种现象的原因有两方面：(1)扎西康炭质板岩中的炭质物质量分数平均为0.79%,变质温度约在300±25℃~340±25℃,炭质物电阻率为6.1×10^-5~6.8×10^-4Ω·m,显示极好的导电性;此外,炭质板岩中存在大量黏土矿物,黏土矿物的吸水性促进了炭质物的连通性,因此炭质物高导电性与连通性的耦合使得炭质板岩呈现低阻高极化电性特征;(2)扎西康矿床的脉型矿体除包含金属硫化物外,还产出大量的脉石矿物,脉石矿物普遍具有高阻低极化电性特征,是造成整个矿体在炭质板岩中呈现高阻低极化异常的根本原因。据此,本文提出在炭质板岩中通过识别脉石矿物引起的高阻低极化异常带间接找矿的新思路,相应的技术方法组合为：利用激电中梯测量定位高阻低极化带的平面位置,再利用音频大地电磁测深探测其深部产状。     

湿陷性黄土边坡预应力锚索耐久性与改善措施研究

随着预应力锚索在湿陷性黄土边坡加固工程中的广泛应用,其耐久性问题就变得日益突出,湿陷性黄土边坡预应力锚索出现了较多因预应力损失而引起的失效事故。基于湿陷性黄土边坡预应力锚索运行现状进行研究,研究表明:黄土腐蚀性对边坡预应力锚索耐久性影响微弱,黄土湿陷性和地质条件变化对边坡预应力锚索耐久性影响显著;通过采用加强排水措施、提升浅部注浆工艺和注重运行维护等措施可以改善湿陷性黄土边坡预应力锚索耐久性;改善后的预应力锚索在监测期内处于平稳波动的服役状态,运行效果良好。本研究以期为湿陷性黄土边坡预应力锚索的设计、施工和运行维护等提供借鉴。     

甘肃地质灾害风险管理思考

本文从5个方面分析了甘肃省地质灾害风险管控面临的形势,在此基础上提出了重构包括生命至上、天人合一、主动而为、依法防灾等地质灾害风险管理科学理念,提出了地质灾害风险管理应遵循资源整合与系统设计、预防优先与抗救结合、分级防治与风险共担、工程治理与避险并重、政府主导与社会参与、应急处置与长效防范6项原则,提出了今后甘肃地质灾害风险管控应从发挥制度在地质灾害风险管控引领作用、打造积极的防灾减灾文化、推进地质灾害防治全民能力提高、强化地质灾害风险管控科技支撑、构建地质灾害隐患动态风险评估体系、加强空天地一体化专群结合监测预警网络建设、加大地质灾害综合治理力度、扩大避险搬迁覆盖面和实施力度、地质灾害防治纳入国土风险管控体系等8个方面的着力点。     

滑坡对降雨响应的多指标监测及综合预警探析:以赣南罗坳滑坡为例

降雨量和位移是当前降雨型滑坡监测预警最常用的指标。然而,降雨量和位移监测结果只能反映降雨作用下滑坡的变形情况,不能揭示滑坡内在物理力学性状对降雨的响应。因此,除降雨量和位移监测之外,建立包括体积含水率、基质吸力等反映滑坡动态演化过程的关键指标监测体系必将成为今后更真实地把握滑坡内在演化趋势、更准确地建立滑坡综合预警判据的最有效手段。笔者对赣南地区典型降雨型滑坡进行了多指标监测及综合预警示范研究。结果表明:(1)在降雨条件下滑坡土体内部体积含水率、基质吸力和温度等多指标均产生有规律的动态响应;(2)随着降雨的持续,滑体体积含水率与基质吸力的变化均具有显著的滞后现象;(3)体积含水率和基质吸力变化速率与滑体位移具有显著的正相关性;(4)滑体温度分布变化规律受大气温度和体积含水率的共同影响。以实测数据的滑坡稳定性分析为基准,在考虑实际降雨入渗深度与滑坡稳定性的关联度上,建立了包括日降雨量、体积含水率增加速率、基质吸力减小速率以及位移速度多元指标预警方法体系,提出了基于关键指标综合预警体系及确定方法,旨在为降雨滑坡准确预警提供新模式。     

Quantitative characterization of different coal rank reservoirs permeability based on NMR and X-CT technology

With the increasing development of coalbed methane (CBM) field, the quantitative characterization and evaluation of coal reservoir physical properties is becoming more and more important to CBM scale development. In order to solve the limitations of conventional methods for testing coal reservoir physical properties, the authors used the high-tech technologies such as nuclear magnetic resonance technology and CT scanning technology to effectively solve the problems of in-situ and integrity of rock samples and acquire the porosity and permeability. Nuclear magnetic resonance and CT scanning experiments of coal samples were carried out to rapidly obtain the pore type, pore size distribution and connectivity, effective porosity, spatial distribution of pore fissures and other refined coal reservoir physical parameters, based on the samples of middle and low rank coal in Shenfu block and high rank coal in Shizhuangnan block. So a set of quantitative characterization analysis technology that can be applied to coal reservoirs with different coal rank was formed.     

生态地质研究进展与展望

生态地质学是研究生态系统与地质环境之间关系的一门交叉学科,对国土空间生态保护修复工作有重要理论支撑作用。我国生态地质研究工作虽然经过了多年的发展与积淀,但时至今日生态地质学仍然处于研究和探索阶段。鉴于此,基于前人的大量研究,总结了国内外生态地质研究进展: 国际上,俄罗斯建立了生态地质学研究体系,美国发起的地球关键带研究是与生态地质研究十分契合的主题; 在国内,生态地质研究主要着眼于”生态-地质”相互作用过程与机理以及地质环境影响下的系统性生态修复研究。在此基础上,提出了生态地质学涵义及其研究内容、方法技术创新及学科体系构建思路,以期为服务山水林田湖草沙整体保护、系统修复、综合治理和生态地质系统深化研究提供借鉴。     

基于FY 3D的MERSI全球晴空数据合成技术

FY-3D极轨气象卫星作为最新一代的极地轨道气象卫星,其图像数据包含了丰富的植被、河流、山区等地表信息,对陆地资源调查、地表类型变化监测等具有重要作用。但几乎每轨遥感图像大约有2/3区域都被云雾覆盖,无法直接获取云层下的地表信息用于产品应用。本文研究晴空数据合成技术,首次提出反射率最小合成法、植被指数最大合成法和西格玛合成法的3个标准联合运用的晴空合成技术,利用先进的多时次气象卫星遥感数据合成技术,自动生成FY-3D中分辨率光谱成像仪(MERSI-II)250m分辨率晴空遥感数据,较好地实现了云和云阴影的去除,生成的晴空效果良好,具备了后续应用的价值。     

The Extra-Area Effect in 71 Cloud Seeding Operations during Winters of 2008–14 over Jiangxi Province,East China

Effects of weather modification operations on precipitation in target areas have been widely reported, but little is specifically known about the downwind (extra-area) effects in China. We estimated the extra-area effect of an operational winter (November-February) aircraft cloud-seeding project in northern Jiangxi Province in eastern China by using a revised historical target/control regression analysis method based on the precipitation data in winter. The results showed that the overall seasonal average rainfall at the downwind stations increased by 21.67%(p=0.0013). This enhancement effect was detected as far as 120 km away from the target area. Physical testing was used to compare the cloud characteristics before and after seeding on 29 November 2014. A posteriori analysis with respect to the characteristics of cloud units derived from operational weather radar data in Jiangxi was performed by tracking cloud units. Radar features in the target unit were enhanced relative to the control unit for more than two hours after the operational cloud seeding, which is indicative of the extra-area seeding effect. The findings could be used to help relieve water shortages in China.     

A Numerical Investigation on Microphysical Properties of Clouds and Precipitation over the Tibetan Plateau in Summer 2014

In order to improve our understanding of microphysical properties of clouds and precipitation over the Tibetan Plateau (TP), six cloud and precipitation processes with different intensities during the Third Tibetan Plateau Atmospheric Science Experiment (TIPEX-Ⅲ) from 3 July to 25 July 2014 in Naqu region of the TP are investigated by using the high-resolution mesoscale Weather Research and Forecasting (WRF) model. The results show unique properties of summertime clouds and precipitation processes over the TP. The initiation process of clouds is closely associated with strong solar radiative heating in the daytime, and summertime clouds and precipitation show an obvious diurnal variation. Generally, convective clouds would transform into stratiform clouds with an obvious bright band and often produce strong rainfall in midnight. The maximum cloud top can reach more than 15 km above sea level and the velocity of updraft ranges from 10 to 40 m s-1. The simulations show high amount of supercooled water content primarily located between 0 and -20℃ layer in all the six cases. Ice crystals mainly form above the level of -20℃ and even appear above the level of -40℃ within strong convective clouds. Rainwater mostly appears below the melting layer, indicating that its formation mainly depends on the melting process of precipitable ice particles. Snow and graupel particles have the characteristics of high content and deep vertical distribution, showing that the ice phase process is very active in the development of clouds and precipitation. The conversion and formation of hydrometeors and precipitation over the plateau exhibit obvious characteristics. Surface precipitation is mainly formed by the melting of graupel particles. Although the warm cloud microphysical process has less direct contribution to the formation of surface precipitation, it is important for the formation of supercooled raindrops, which are essential for the formation of graupel embryos through heterogeneous freezing process. The growth of graupel particles mainly relies on the riming process with supercooled cloud water and aggregation of snow particles.