公交车站台智能显示牌系统设计与实现——以南充市的一个站台为例

介绍了一种基于GIS/GPS/GSM技术的实时显示公交车运动状态和时间的电子显示牌设计方案。以南充市为例,在利用GPS系统对车辆精确定位的基础上,采用GSM无线通讯网关实现消息的传输,并在电子地图上实时的显示出公交车辆的位置、状态和各路公交车到达客人所在目的站点所需用的时间,方便人们更有效快捷地选择交通工具。本文重点分析了系统的各组成部分的功能和实现方式,最后采用VC++6.0和MapXtreme2004开发实现了该系统。     

GPS IF信号的计算机模拟和实现

提出了用GPS卫星星历来近似模拟计算载波多普勒频率和卫星信号延迟,进而用计算机模拟GPS接收机的中频数字信号,为软件GPS接收机的模型算法提供数据源.与实际接收的卫星中频数字信号的频谱进行比较,结果表明,用计算机模拟GPS IF信号是可行的和有效的.     

准噶尔盆地西北缘克-百地区不整合面及其动力学条件

不整合及其性质和强度的确定对理解克拉玛依至百口泉地区构造变形历史和油气聚集规律具有重要意义。根据地震资料研究显示,该区二叠纪至中生代地层中存在多个不整合面,且多为构造运动的反映。其中对克-百地区构造形成具有重要影响的有四期,其一发生在中二叠统下乌尔禾组沉积后,主要表现为冲断掀斜运动,使其前的二叠纪沉积向南东方向掀斜抬升,遭受剥蚀;其二发生在三叠纪末期,对克百断裂上盘大侏罗沟断层至百口泉段的构造有重要影响;其三发生在中侏罗世末,该期构造运动在克百断裂带及其上盘表现最为清楚,以冲断为主,局部地区有褶皱现象;其四发生在早白垩世末期,表现为掀斜运动,褶皱和断裂作用相对较弱。克-百地区不同时期、不同构造部位变形的差异性与构造动力条件密切相关。     

浅谈城市高层建筑施工的沉降观测

目前城市高层建筑越来越多,它的使用安全性也随之受到人们的关注。对城市高层建筑垂直沉降观测进行了详尽的阐述,介绍了沉降基准点、观测点的布设与设计原则,沉降观测的方法与施测精度,建筑物的沉降趋势以及观测成果的整理与分析,并进行了实例分析,对实际工作应用具有一定的参考价值。     

基于遥感技术的土地复垦工程量评价研究

随着全国范围内土地复垦工作的广泛开展,对于土地复垦项目的评价变得越来越重要。通过选取实验区域,获取实验区的相关实地数据及遥感影像,研究处理和解译实验区遥感影像,对影像进行分类处理,提取了土地复垦项目的工程量指标,并对其进行精度分析,建立了土地复垦项目的工程量评价体系,结果与实地数据一致,说明遥感评价方法具有实际可行性。     

基于空间方向相似性的面状矢量空间数据匹配算法

数据一致性匹配处理技术是空间数据融合中的关键技术.采用方向关系矩阵模型进行空间方向关系描述,讲座了一般情况下的这间方向相似性计算,提出了基于空间方向相似性的矢量数据匹配算法流程.最后,以面状目标为研究对象,以某地局部地区居民地数据为例,对基于空间方向相似性的矢量数据匹配算法进行了试验与分析.     

Hybrid seismic modeling based on discrete-wave number and finite-difference methods

Any calculation of seismic wave propagation comprising the seismic source, the travel path, and the receiver site in a single finite-difference (FD) model requires a considerable amount of computer time and memory. Moreover, the methods currently available for including point sources in the 2D FD calculations are far-field approximations only. Therefore we have developed a new hybrid method for treating the seismic wave fields at localized 2D near-surface structures embedded in a 1D background medium, and excited by a point source. The source radiation and propagation in the background model is solved by the discrete-wave number (DW) method, while the propagation in the local 2D structure is calculated by the FD method. The coupling between the two sets of calculations is performed on a rectangular excitation box surrounding the local structure. We show the usefulness of the method in ground-motion studies where both near-field source effects and local site effects are important. Technical problems connected with the inconsistency between the 3D source radiation and the 2D FD calculation are minor for the relatively distant in-plane point explosive sources, but are more serious for the in-plane dislocation sources.     

Magnetic properties,self-reversal remanence and thermal alteration products of smythite

Summary This study is a follow up of the investigation of some magnetic properties and metastability of greigite in samples obtained from Miocene claystones in the Kruné hory (Erzgebirge) Piedmont basins (Bohemia). Three different methods of upgrading the smythite were applied; the magnetic properties of the concentrates are compared. The thermal conversion of smythite sets in at 200°C while greigite converts at 250°C. The first intermediate products to be formed are iron sulphides, marcasite clearly dominating over pyrite and pyrrhotite. Apart from a Fe³⁺ sulphate with a composition of Fe₂(SO₄)₃, oxidation of these sulphides gives rise to -Fe₂O₃. The result of the subsequent decomposition of the mentioned sulphate is the formation of -Fe₂O₃, which retains the sulphate structure. The final product of the thermal decomposition at 800°C is -Fe₂O₃. In the smythite concentrate the conversion to Fe³⁺ sulphate and -Fe₂O₃ is about twice as intensive as in greigite. No direct conversion to -Fe₂O₃ was found. During the thermal process self-reversals of remanence were observed, in various samples as many as four reversals in the temperature interval from 340 to 590°C. The occurrences of self-reversals of remanence were only observed at high degrees of thermal demagnetization, of the order of 10^–2 down to 10^–3 in the temperature interval of sulphide origin (below 400°C), and of the order of 10^–4 down to 10^–6 in the temperature interval of Fe-oxides origin (above 400°C).Presented at the 3rd Conference on New Trends in Geomagnetism, Castle of Smolenice, Czechoslovakia, June 22–29, 1992     

Provenance of Conglomerate and Sandstone from Early Permian Shoushangou Formation in Xi Ujimqin, Inner Mongolia: Implications for Understanding Paleo-Asian Ocean Subduction

During the Late Carboniferous to Early Permian, a rift was formed by post-collisional extension after ocean closure or an island arc-related basin formed by Paleo-Asian Ocean (PAO) subduction in the Xi Ujimqin area. Nevertheless, the closure time of the PAO is still under debate. Thus, to identify the origin of the PAO, the geochemistry and U-Pb age of zircons were analyzed for the extra-large deep marine, polymict clastic boulders and sandstones in the Shoushangou Formation within the basin. The analyses revealed magmatic activity and tectonic evolution. The conglomerates include megaclasts of granite (298.8 ± 9.1?Ma) and granodiorite porphyry (297.1 ± 3.1?Ma), which were deposited by muddy debris flow. Results of this study demonstrated that the boulders of granitoids have the geochemistry of typical I-type granite, characterized by low Zr + Nb + Ce + Y and low Ga/Al values. The granitoid boulders were formed in island arc setting, indicating the presence of arc magmatism in the area that is composed of the Late Carboniferous to Early Permian subduction-related granitoid in southern Xi Ujimqin. Multiple diagrams for determining sedimentary provenance using major and trace elements indicate that Shoushangou sediments originated from continental island arc-related felsic rocks. Detrital zircon U-Pb age cluster of 330–280?Ma was obtained, indicating input from granite, ophiolite, Xilin Gol complex, and Carboniferous sources to the south. The basin was geographically developed behind the arc during the Early Permian period because the outcropped intrusive rocks in the Late Carboniferous to Early Permian form a volcanic arc. The comprehensive analyses of source areas suggest that Shoushangou sediments developed in a backarc basin in response to the northward subduction of the PAO. The backarc basin and intrusive rocks, in addition to previously published Late Carboniferous to Early Permian magmatic rocks of arc unit in Xilin Gol, confirm the presence of an Early Permian trench-arc-basin system in the region, represented by the Baolidao arc and Xi Ujimqin backarc basin. This study highlights the importance and potential of combined geochemical and geochronological studies of conglomerates and sandstone for reconstructing the geodynamic setting of a basin.