Monitoring agricultural cropping patterns across the Laurentian Great Lakes Basin using MODIS-NDVI data

The Moderate Resolution Imaging Spectrometer (MODIS) Normalized Difference Vegetation Index (NDVI) 16-day composite data product (MOD12Q) was used to develop annual cropland and crop-specific map products (corn, soybeans, and wheat) for the Laurentian Great Lakes Basin (GLB). The crop area distributions and changes in crop rotations were characterized by comparing annual crop map products for 2005, 2006, and 2007. The total acreages for corn and soybeans were relatively balanced for calendar years 2005 (31,462 km² and 31,283 km², respectively) and 2006 (30,766 km² and 30,972 km², respectively). Conversely, corn acreage increased approximately 21% from 2006 to 2007, while soybean and wheat acreage decreased approximately 9% and 21%, respectively. Two-year crop rotational change analyses were conducted for the 2005–2006 and 2006–2007 time periods. The large increase in corn acreages for 2007 introduced crop rotation changes across the GLB. Compared to 2005–2006, crop rotation patterns for 2006–2007 resulted in increased corn–corn, soybean–corn, and wheat–corn rotations. The increased corn acreages could have potential negative impacts on nutrient loadings, pesticide exposures, and sediment-mediated habitat degradation. Increased in US corn acreages in 2007 were related to new biofuel mandates, while Canadian increases were attributed to higher world-wide corn prices. Additional study is needed to determine the potential impacts of increases in corn-based ethanol agricultural production on watershed ecosystems and receiving waters.     

A community-based urban forest inventory using online mapping services and consumer-grade digital images

Community involvement in gathering and submitting spatially referenced data via web mapping applications has recently been gaining momentum. Urban forest inventory data analyzed by programs such as the i-Tree ECO inventory method is a good candidate for such an approach. In this research, we tested the feasibility of using spatially referenced data gathered and submitted by non-professional individuals through a web application to augment urban forest inventory data. We examined the use of close range photogrammetry solutions of images taken by consumer-grade cameras to extract quantitative metric information such as crown diameter, tree heights and trunk diameters. Several tests were performed to evaluate the accuracy of the photogrammetric solutions and to examine their use in addition to existing aerial image data to supplement or partially substitute for standard i-Tree ECO field measurements.     

Automatic detection of residential buildings using LIDAR data and multispectral imagery

This paper presents an automatic building detection technique using LIDAR data and multispectral imagery. Two masks are obtained from the LIDAR data: a ‘primary building mask’ and a ‘secondary building mask’. The primary building mask indicates the void areas where the laser does not reach below a certain height threshold. The secondary building mask indicates the filled areas, from where the laser reflects, above the same threshold. Line segments are extracted from around the void areas in the primary building mask. Line segments around trees are removed using the normalized difference vegetation index derived from the orthorectified multispectral images. The initial building positions are obtained based on the remaining line segments. The complete buildings are detected from their initial positions using the two masks and multispectral images in the YIQ colour system. It is experimentally shown that the proposed technique can successfully detect urban residential buildings, when assessed in terms of 15 indices including completeness, correctness and quality.     

Study on the urban heat island effects and its relationship with surface biophysical characteristics using MODIS imageries

This study assesses surface urban heat island (UHI) and its associated surface physical characteristics using remote sensing approaches. TERRA/MODIS images acquired in 2005 in three different seasons were selected to generate land surface tem-perature and surface characteristics for the Changsha-Zhuzhou-Xiangtan metropolitan area in China. The intensity of urban heat is-land effects and its seasonal variations were examined. The result showed that UHI effects were significant both in the summer and the spri...     

Integrating terrain and vegetation indices for identifying potential soil erosion risk area

The present paper offers an innovative method to monitor the change in soil erosion potential by integrating terrain and vegetation indices derived from remote sensing data. Three terrain indices namely, topographic wetness index (TWI), stream power index (SPI) and slope length factor (LS), were derived from the digital elevation model. Normalized vegetation index (NDVI) was derived for the year 1988 and 2004 using remote sensing images. K-mean clustering was performed on staked indices to categorize the study area into four soil erosion potential classes. The validation of derived erosion potential map using USLE model showed a good agreement. Results indicated that there was a significant change in the erosion potential of the watershed and a gradual shifting of lower erosion potential class to next higher erosion potential class over the study period.     

Use of service middleware based on ECHO with CSW for discovery and registry of MODIS data

Nowadays, NASA is producing several terabytes Moderate Resolution Imaging Spectroradiometer (MODIS) data everyday; how to find the data with criteria, such as specific times, locations, and scales using an international standard becomes more and more important. In this paper, a service-oriented architecture for use of the integration Earth Observation System Clearing-HOuse (ECHO) with the Open Geospatial Consortium (OGC) Catalogue Service—Web profile (CSW) is put forward. The architecture consists of three roles: a service requester (the user), a service provider (the ECHO metadata server), and a service broker (the GeoNetwork CSW and MODIS registry service middleware). The core component-MODIS registry service middleware includes three components: metadata fetcher, metadata transformer, and metadata register. The metadata fetcher is used to fetch metadata from ECHO metadata server; the metadata transformer is responsible for transform metadata from one form to another; the metadata register is in charge of registering ISO19139-based metadata to CSW. A prototype system is designed and implemented by using the service middleware technology and a standard interface and protocol. The feasibility and the response time of registry and retrieval of MODIS data are evaluated by means of a realistic LPDAAC_ECS MODIS data center. The implementation of this prototype system and the experiment show that the architecture and method is feasible and effective.     

Variability analysis of groundwater levels — AGIS-based case study

The present study has analyzed the variability in depth to water level below ground level (bgl) vis-à-vis groundwater development and rainfall from 1987 to 2007 in agriculture dominated Kaithal district of Haryana state in India. Spatial distribution of groundwater depth was mapped and classified into different zones using ILWIS 3.6 GIS tools. Change detection maps were prepared for 1987–1997 and 1997–2007. Groundwater depletion rates during successive decades were compared and critical areas with substantial fall in groundwater levels were identified. Further, block wise trends of change in groundwater levels were also analyzed. The water table in fresh belt areas of the district (Gulha, Pundri and Kaithal blocks) was observed to decline by a magnitude ranging from 10 m to 23 m. In Kalayat and Rajaund blocks, the levels were found fluctuating in a relatively narrow range of 4–9 m. During 1997–2007, the depletion has been faster compared to the preceding decade. Excessive groundwater depletion in major part of the district may be attributed to indiscriminate abstraction for irrigation and decrease in rainfall experienced since 1998. Changes in cropping pattern and irrigation methods are needed in the study area for sustainable management of the resource.     

Approaches for delineating landslide hazard areas using different training sites in an advanced artificial neural network model

The current paper presents landslide hazard analysis around the Cameron area, Malaysia, using advanced artificial neural networks with the help of Geographic Information System (GIS) and remote sensing techniques. Landslide locations were determined in the study area by interpretation of aerial photographs and from field investigations. Topographical and geological data as well as satellite images were collected, processed, and constructed into a spatial database using GIS and image processing. Ten factors were selected for landslide hazard including: 1) factors related to topography as slope, aspect, and curvature; 2) factors related to geology as lithology and distance from lineament; 3) factors related to drainage as distance from drainage; and 4) factors extracted from TM satellite images as land cover and the vegetation index value. An advanced artificial neural network model has been used to analyze these factors in order to establish the landslide hazard map. The back-propagation training method has been used for the selection of the five different random training sites in order to calculate the factor’s weight and then the landslide hazard indices were computed for each of the five hazard maps. Finally, the landslide hazard maps (five cases) were prepared using GIS tools. Results of the landslides hazard maps have been verified using landslide test locations that were not used during the training phase of the neural network. Our findings of verification results show an accuracy of 69%, 75%, 70%, 83% and 86% for training sites 1, 2, 3, 4 and 5 respectively. GIS data was used to efficiently analyze the large volume of data, and the artificial neural network proved to be an effective tool for landslide hazard analysis. The verification results showed sufficient agreement between the presumptive hazard map and the existing data on landslide areas.     

Integer least-squares theory for the GNSS compass

Global navigation satellite system (GNSS) carrier phase integer ambiguity resolution is the key to high-precision positioning and attitude determination. In this contribution, we develop new integer least-squares (ILS) theory for the GNSS compass model, together with efficient integer search strategies. It extends current unconstrained ILS theory to the nonlinearly constrained case, an extension that is particularly suited for precise attitude determination. As opposed to current practice, our method does proper justice to the a priori given information. The nonlinear baseline constraint is fully integrated into the ambiguity objective function, thereby receiving a proper weighting in its minimization and providing guidance for the integer search. Different search strategies are developed to compute exact and approximate solutions of the nonlinear constrained ILS problem. Their applicability depends on the strength of the GNSS model and on the length of the baseline. Two of the presented search strategies, a global and a local one, are based on the use of an ellipsoidal search space. This has the advantage that standard methods can be applied. The global ellipsoidal search strategy is applicable to GNSS models of sufficient strength, while the local ellipsoidal search strategy is applicable to models for which the baseline lengths are not too small. We also develop search strategies for the most challenging case, namely when the curvature of the non-ellipsoidal ambiguity search space needs to be taken into account. Two such strategies are presented, an approximate one and a rigorous, somewhat more complex, one. The approximate one is applicable when the fixed baseline variance matrix is close to diagonal. Both methods make use of a search and shrink strategy. The rigorous solution is efficiently obtained by means of a search and shrink strategy that uses non-quadratic, but easy-to-evaluate, bounding functions of the ambiguity objective function. The theory presented is generally valid and it is not restricted to any particular GNSS or combination of GNSSs. Its general applicability also applies to the measurement scenarios (e.g. single-epoch vs. multi-epoch, or single-frequency vs. multi-frequency). In particular it is applicable to the most challenging case of unaided, single frequency, single epoch GNSS attitude determination. The success rate performance of the different methods is also illustrated.     

Improving gravity anomalies over China marginal sea from retracked Geosat and ERS-1 data

The quality of altimeter data and ocean tide model is critical to the recovery of coastal gravity anomalies. In this contribution, three retracking methods (threshold, improved threshold and Beta-5) are investigated with the aim of improving the altimeter data over a shallow water area. Comparison indicates that the improved threshold is the best retracking method over China Sea. Two ocean tide models, NAO99b and CSR4.0, are analyzed. Results show that different tide models used in the processing of altimeter data may result in differences more than 10 mGal in recovered coastal gravity anomalies. Also, NAO99b is more suitable than CSR4.0 over the shallow water area of China Sea. Finally, gravity anomalies over China Sea are calculated from retracked Geosat/GM and ERS-1/GM data by least squares collocation. Comparison with shipborne gravimetry data demonstrates that gravity anomalies from retracked data are significantly superior to those from non-retracked data. Our results have the same order as the other two altimeter-derived gravity models: Sandwell&Smith(V16) and DNSC08.