Wave runup on a concentric twin perforated circular cylinder

The regular wave interaction with a twin concentric porous circular cylinder system consisting of an inner impermeable cylinder and an outer perforated cylinder was studied through physical model and numerical model studies. The experiments were carried out on the twin concentric cylinder model in a wave flume to study the wave runup and rundown at the leading and trailing edges of the perforated cylinder. It was found that the maximum wave runup on the perforated cylinder is almost same as the incident wave height. The experimental results were used to develop the predictive formulae for the wave runup and rundown on the perforated cylinder, which can be easily used for design applications. The wave runup profiles around the perforated cylinder for different values of ka and porosities were studied numerically using Green's Identity Method. The results of the numerical study are presented and compared with the experimental measurements.     

Second-order resonance of sloshing in a tank

Sloshing in a two-dimensional rectangular tank in horizontal motion is analysed based on the velocity potential theory. It is found that even when the first-order excitation is away from all the natural frequencies of the tank, second-order resonance can still occur when the sum-frequency or the difference-frequency is equal to one of the natural frequencies corresponding to the even mode. However, such resonance is not excited when the sum or difference frequency is equal to the natural frequency of an odd mode.     

Phytoplankton biomass and size fractions in surface waters of the Australian sector of the southern ocean

We collected surface water along the 142nd E meridian from Tasmania to Antarctica in December 1999. We measured temperature, salinity and total chlorophyll a; additionally, we collected suspended particle size fractions and used fluorometric analysis to determine the quantity of chlorophyll a in each of four cell size classes: picoplankton (<3 μm), two nanoplankton fractions (3–10 μm and 10–20 μm) and microplankton (> 20 μm). Changes in temperature and salinity show that we crossed 6 water masses separated by 5 fronts. We found low abundance (<0.2 mg m⁻³) of chlorophyll in all size classes, with the exception of higher values near the continent (0.2 to 0.4 mg m⁻³). Lowest chlorophyll values (<0.1 mg m⁻³) were found in the Polar Frontal Zone (51° to 54°S). Microplankton made up the largest portion of total chlorophyll throughout most of the region. We conclude that biomass of all phytoplankton fractions, especially pico-and nanoplankton, was constrained by limiting factors, most probably iron, throughout the region and that ecosystem dynamics within a zone are not circumpolar but are regionalized within sectors.     

Modeling the mesoscale variability in the Adriatic Sea

A new high-resolution (<2 km) version of the DieCAST fourth-accuracy-order model for the ocean circulation is proposed for the study of the general circulation, mesoscale structures, and their variability in the Adriatic Sea. The model uses mean seasonal data on the temperature, salinity, buoyancy fluxes, and wind. The data of the COAMPS system with a 4-km resolution were used for the simulation of the sea response to the effects of various winds: Sirocco, Maestro, and two types of boras. The mean monthly runoffs from 38 rivers and mean daily runoffs from 12 main rivers throughout the year were given in the model. The conditions at the open boundary of the Strait of Otranto were given on the basis of the hierarchy of two coarser models for the Adriatic and Mediterranean seas. Due to the extremely weak dissipation and the high resolution (the mesh size is less than the baroclinic radius of deformation, 5–10 km), the model allows one to trace the development of a baroclinic instability along the Italian coast, to simulate mesoscale structures associated with the instability, and to estimate the scales of the structures. Mesoscale filaments, meanders, mushroom-like currents, fronts, and intrusions known from satellite observations were simulated and explained. The scenario of the anomalous upwelling near the Italian coast observed in the summer of 2003 was also simulated and analyzed.     

Quaternary evolution of the Gulf of İzmit (NW Turkey): a sedimentary basin under control of the North Anatolian Fault Zone

The Quaternary evolution of the Gulf of İzmit, situated on the tectonically active North Anatolian Fault Zone (NAFZ), was investigated using seismic reflection, paleontologic, and sediment textural data. On the basis of seismic stratigraphic and sedimentologic-paleontologic interpretations, four depositional units were distinguished within the Plio-Quaternary sequence of the Gulf of İzmit. According to these data, Plio-Quaternary deposits supplied from the northern terrestrial area started to accumulate during a progradational phase, in a south-facing half-graben. A coarse-grained sedimentary unit prograding into the gulf from the south since 200 ka b.p. indicates a dramatic variation in the evolution of the gulf, with the initiation of a new strike-slip fault of the NAFZ and a corresponding uplift of the Armutlu Peninsula in the south of the gulf. During the evolution of this fault from a wide shear zone consisting of right-stepped strike-slip faults and pull-apart basins to a localized principal fault zone, sediments were deposited under the influence of northerly prograding terrestrial and shallow-marine conditions due to relative sea-level fluctuations in the Marmara Sea. During this period, the Gulf of İzmit was invaded mainly by Mediterranean and partly by Black Sea waters. In the latest glacial period, shallow areas in the gulf became subaerially exposed, whereas the central and western sub-basins of the gulf turned into lakes. The present evolution of the Gulf of İzmit is controlled by the after effects of the new rupture of the NAFZ and the estuarine nature of the gulf environment.     

Advances in the fatigue assessment of wire ropes

This paper presents the findings from an in-depth analysis of the (axial) stiffness data recorded during tension–tension fatigue tests on wire ropes, particularly in relation to how changes in stiffness during testing relate to changes in rope strength. A linear relationship between stiffness and strength is shown to exist and a methodology presented for quantifying residual strength with applied cycles. New lower bound fatigue lines for six-strand rope and spiral strand are presented which are based on a 10% loss of strength. These new lines have the advantage of having been established using a common discard criterion for wire ropes.     

Parametric integral model of the wind disturbance concerted with the All-Union wave constructional standards and regulations (CSR)

In a modern statement, the concept of a parametric integral model consists of integration of the energy balance equation (or wind forcing) over the frequency. The angular distribution of the energy and the frequency spectrum are prescribed. The equation is solved by the numerical method taking into consideration the energy advection and its local pumping with the assigned wind field varying in time and space. To calculate the swell waves one can employ the well-known Longuet-Higgins theorem on the invariance of a two-dimensional spectrum. or the ray discrete technique.UDK 551.466.315Translated by Mikhail M. Trufanov.     

Measurement of manganese, zinc and cadmium complexation in seawater using Chelex ion exchange equilibria

Equilibria between Chelex 100* and manganese, zinc and cadmium ions were used to determine the complexation of these trace metals in 36‰ Gulf Stream seawater at 25°C and pH 8.2. The method utilized radiotracers (⁵⁴Mn, ⁶⁵Zn, and ¹⁰⁹Cd) to quantify trace metal adsorption from trace metal-amended seawater and from seawater containing a series of ethylenediaminetetracetate (EDTA)—metal ion buffers. Results were consistent with Chelex adsorption of both trace metal ions and trace metal—EDTA chelates. Equilibrium models fitted to the data were used to establish conditional stability constants for Chelex adsorption of manganese, zinc and cadmium ions and for adsorption of EDTA-chelates. These models also yielded ratios of free metal ions to total dissolved trace metal concentrations in seawater: 10^−0.1 for manganese, 10^−0.2 for zinc, and 10^−1.5 for cadmium. Independent measurements with a cadmium ion-selective electrode also yielded a free: total cadmium ratio of 10^−1.5.