Anelasticity of the crust and upper mantle beneath north and central India from the inversion of observed Love and Rayleigh wave attenuation data

The fundamental mode Love and Rayleigh waves generated by earthquakes occurring in Kashmir, Nepal Himalaya, northeast India and Burma and recorded at Hyderabad, New Delhi and Kodaikanal seismic stations are analysed. Love and Rayleigh wave attenuation coefficients are obtained at time periods of 15–100 seconds, using the spectral amplitude of these waves for 23 different paths along northern (across Burma to New Delhi) and central (across Kashmir, Nepal Himalaya and northeast India to Hyderabad and Kodaikanal) India. Love wave attenuation coefficients are found to vary from 0.0003 to 0.0022 km^–1 for northern India and 0.00003 km^–1 to 0.00016 km^–1 for central India. Similarly, Rayleigh wave attenuation coefficients vary from 0.0002 km^–1 to 0.0016 km^–1 for northern India and 0.00001 km^–1 to 0.0009 km^–1 for central India. Backus and Gilbert inversion theory is applied to these surface wave attenuation data to obtainQ ^–1 models for the crust and uppermost mantle beneath northern and central India. Inversion of Love and Rayleigh wave attenuation data shows a highly attenuating zone centred at a depth of 20–80 km with lowQ for northern India. Similarly, inversion of Love and Rayleigh wave attenuation data shows a high attenuation zone below a depth of 100 km. The inferred lowQ value at mid-crustal depth (high attenuating zone) in the model for northern India can be by underthrusting of the Indian plate beneath the Eurasian plate which has caused a low velocity zone at this shallow depth. The gradual increase ofQ ^–1 from shallow to deeper depth shows that the lithosphere-asthenosphere boundary is not sharply defined beneath central India, but rather it represents a gradual transformation, which starts beneath the uppermost mantle. The lithospheric thickness is 100 km beneath central India and below that the asthenosphere shows higher attenuation, a factor of about two greater than that in the lithosphere. The very lowQ can be explained by changes in the chemical constitution taking place in the uppermost mantle.     

Transfer factors of contamination between the German Bight and its tributary waters derived from measured tritium and Cs-137 activity concentrations

Summary Evaluation of the results of radioactivity monitoring in the southern North Sea between 1977 and 1987 has shown that in the water of the German Bight three areas stand out due to their different ratios between salinity and concentration of dissolved Cs-137 and tritium. While salinity steadily increases with greater distance from the coast, the Cs-137 concentration above 34 PSU (Practical Salinity Unit) increases sharply and shows how far water from the western and central North Sea, contaminated by nuclear reprocessing in Sellafield (Irish Sea), reaches into the German Bight. In the 34 to 32.5 PSU range, the influence can be seen of water contaminated by tritium originating in the rivers Rhein, Maas and Schelde, precipitation and the nuclear reprocessing plant at La Hague (Channel). Below 32.5 PSU, the influence of the influx from the rivers Elbe, Weser and Ems becomes apparent. These rivers are less contaminated with tritium.Assuming that Cs-137 and tritium, like the salinity of sea water, behave conservatively and that the decay-time of these two isotopes is long compared with the time-scale of water exchange in the southern North Sea, the concentration values measured are used to calculate the structure of the water masses in the three areas of the German Bight mentioned above using the mixing principle. Evaporation is taken into account. Results show that beyond 34 PSU, about half the sea water originates in the western central North Sea while the other half comes from the Channel. Below 34 PSU, the first mentioned share amounts only to a few per cent. Results also show that fresh water from the Rhein delta and precipitation, increasing with a decrease in salinity from 34 to 32.5 PSU, accounts for a maximum of 5% each. The fresh water influx into the German Bight via the rivers Elbe, Weser and Ems amounts to app. 11% when the PSU value reaches 29. The calculated portions are the mean values for the observation period. The number of measurements available makes it impossible to distinguish more exactly between the temporal and spatial variability of the amounts of the individual components.The quantity of each calculated portion of sea water also represents the transfer factor of concentration between the nuclide concentration in the source (e. g. the Rhein) and the concentration in the German Bight. In addition, these factors are used to calculate the transfer factors of discharge using the annual drainage rates of the sources. Thus a radioactive discharge rate of 10¹⁵ Bq per year into the Rhein would produce a mean activity concentration of 0.34 Bq/l in the German Bight (at a salinity of 33.5 PSU). To verify the calculated transfer factors, tritium concentrations in the German Bight are derived from existing environmental tritium data and the results are compared with the values actually measured.

---

Transferkaktoren zwischen der Deutschen Bucht und ihren Zuflüssen abgeleitet aus der Tritium- und Cs-137-Aktivitätskonzentration in den beteiligten Gewässern

Zusammenfassung Eine zusammenhängende Auswertung der Meßergebnisse der Radioaktivitätsüberwachung in der südlichen Nordsee über den Zeitraum 1977 bis 1987 hat gezeigt, daß im Wasser der Deutschen Bucht deutlich drei durch den Salzgehalt des Meerwassers und die Konzentration der gelösten Radionuklide charakterisierte Bereiche zu unterscheiden sind.Während der Salzgehalt mit wachsender Entfernung von der Küste stetig zunimmt, steigt die Cs-137-Konzentration oberhalb 34 PSU (Practical Salinity Unit) sprunghaft an und signalisiert die Grenze, bis zu der das durch die Kernbrennstoff-Wiederaufarbeitung in Sellafield (Irische See) kontaminierte Meerwasser der westlichen und mittleren Nordsee in die Deutsche Bucht vordringt. Im Bereich 34 bis 32,5 PSU ist das von Westen zugeführte, stärker Tritium-kontaminierte Wasser aus Rhein, Maas, Schelde und atmosphärischem Niederschlag zu erkennen, an das sich unterhalb 32,5 PSU der geringer mit Tritum kontaminierte Zufluß aus Elbe, Weser und Ems anschließt.Davon ausgehend, daß sich Cs-137 und Tritium wie der Salzgehalt im Meerwasser konservativ verhalten und daß weiterhin die Halbwertzeit des radioaktiven Zerfalls dieser beiden Nuklide lang ist gegenüber den Wasseraustauschzeiten im betrachteten Meeresgebiet, wurden die in der südlichen Nordsee gemessenen sowie aus der Literatur für den Süßwasserbereich entnommenen Konzentrationswerte dazu genutzt, um rechnerisch mit Hilfe des Mischungsgesetzes den Wassermassenaufbau in den drei genannten Salinitätsbereichen in der Deutschen Bucht quantitativ zu bestimmen. Es zeigte sich, daß oberhalb von 34 PSU das Meerwasser aus etwa gleichen Teilen aus der westlichen/mittleren Nordsee und dem Kanal stammt, während unterhalb dieser Salzgehaltsgrenze nur noch mit wenigen Prozentanteilen Wasser aus der mittleren Nordsee zu finden ist. Ferner ergab sich, daß das aus dem Rheinmündungsbiet bzw, aus dem atmosphärischen Niederschlag stammende Süßwasser — mit sinkendem Salzgehalt steigend — bei 32,5 PSU einen maximalen Anteil von jeweils 5% an Meerwasser hat. Der direkte Süßwasserzufluß aus Elbe, Weser und Ems beträgt in die Deutsche Bucht bei 29 PSU ca. 11%.Die berechneten Anteile sind Mittelwerte über den gesamten Beobachtungszeitraum; die Anzahl der Messungen läßt eine genauere Unterscheidung in zeitliche und räumliche Variabilität der Zusammensetzung nicht zu.Die Größe des jeweils bestimmten Anteils am Meerwasser stellt gleichzeitig den Transferfaktor der Konzentration zwischen der Nuklidkonzentration im Ursprungsgewässer (z. B. dem Rhein) und der sich daraus einstellenden Konzentration in der Deutschen Bucht dar. Ferner wurden die Transferfaktoren der Konzentration in Verbindung mit aus der Literatur entnommenen Größen der jährlichen Abflußmengen der Ursprungsgewässer genutzt, um auch die Transferfaktoren der jährlichen Einbringung zu ermitteln. So ergibt die jährliche Einbringung von 10¹⁵ Bq eines Nuklides z. B. in den Rhein bei 33,5 PSU in der Deutschen Bucht eine mittlere Konzentration von 0,34 Bq/l.Als Anwendungsbeispiel und zur Überprüfung der Richtigkeit der Transferfaktoren wird die Auswertung des Tritiumauslasses bei La Hague auf die Deutsche Bucht berechnet und mit den gemessenen Werten verglichen.

     

Na-rich carbonate inclusions in perovskite and calzirtite from the Guli intrusive Ca-carbonatite,polar Siberia

Carbonate phases, some rich in Na₂O and comparatively rich in SrO and BaO, occur as inclusions in perovskite and calzirtite (Ca₂Zr₅Ti₂O₁₆) in the carbonatite of the Guli complex, Siberia. This is the first record of alkali carbonates, akin to nyerereite [Na₂Ca(CO₃)₂], in plutonic igneous rocks. The inclusion populations suggest that the parental magma of the complex was Ca-rich but developed Na-rich differentiates during the latest stages. This points to the dominant calcic carbonatites of the complex not being derivatives of alkali-rich parental carbonatites. These alkali-rich carbonate inclusions (and rare inclusions of djerfisherite) have been preserved due to the resistance of perovskite and calzirtite to processes of leaching, hydrothermal alteration and weathering.     

High pressure experimental calibration of the olivine-orthopyroxene-spinel oxygen geobarometer: implications for the oxidation state of the upper mantle

Synthetic spinel harzburgite and lherzolite assemblages were equilibrated between 1040 and 1300° C and 0.3 to 2.7 GPa, under controlled oxygen fugacity (f _{O 2}). f _{O 2} was buffered with conventional and open double-capsule techniques, using the Fe−FeO, WC-WO₂-C, Ni−NiO, and Fe₃O₄−Fe₂O₃ buffers, and graphite, olivine, and PdAg alloys as sample containers. Experiments were carried out in a piston-cylinder apparatus under fluid-excess conditions. Within the P-T-X range of the experiments, the redox ratio Fe³⁺/ΣFe in spinel is a linear function of f _{O 2} (0.02 at IW, 0.1 at WCO, 0.25 at NNO, and 0.75 at MH). It is independent of temperature at given Δlog(f _{O 2}), but decreases slightly with increasing Cr content in spinel. The Fe³⁺/ΣFe ratio falls with increasing pressure at given Δlog(f _{O 2}), consistent with a pressure correction based on partial molar volume data. At a specific temperature, degree of melting and bulk composition, the Cr/(Cr+Al) ratio of a spinel rises with increasing f _{O 2}. A linear least-squares fit to the experimental data gives the semi-empirical oxygen barometer in terms of divergence from the fayalite-magnetite-quartz (FMQ) buffer:

An Example of Island-Arc Petrogenesis: Geochemistry and Petrology of the Southern Luzon Arc, Philippines

Volcanism throughout the Luzon arc is associated with eastwardsubduction of the South China Sea floor along the Manila Trench.The southern section of the arc, the focus of this study, extendsfrom the Lingayen-Dingalan fault to the small islands just southof Luzon. Two segments appear to exist along this section ofthe arc the northern Bataan and southern Mindoro segments whichare separated by the Macolod Corridor. The volcanic rocks have typical arc phenocryst mineralogies:olivine, clinopyroxene, plagioclase, and titanomagnetite inthe most mafic rocks and clinopyroxene, plagioclase, orthopyroxene,titanomagnetite, ? amphibole in the more felsic samples. Complexzoning, sieve textures, and decoupling of incompatible traceelements suggest that processes such as assimilation have takenplace. The rocks from the study area range from basalts to rhyolitesand show typical calc-alkaline features. The rocks of the MacolodCorridor and Mindoro segment are particularly enriched in largeion lithophile elements (LILE), light rare earth elements (LREE),and radiogenic Sr compared with the Bataan segment. The datafall within the mantle array on Sr-Nd isotopic diagrams andgrade toward higher Sr and lower Nd isotopic values from northto south. A likely source for the volcanics of this study is either amid-ocean ridge basalt (MORB)-type mantle that undergoes higherdegrees of partial melting than regions involved in MORB generationor a previously depleted source. We suggest that the high fieldstrength element (HFSE) anomalies have been derived throughdifferential element partitioning during fluid transport fromthe subducted lithosphere to the mantle wedge. Continental crustal material seems to play a significant roleparticularly in the Macolod Corridor and the Mindoro segment,based on the high LILE, La/Sm ratios, radiogenic Sr isotopes,and ¹⁸O values. The Macolod Corridor and the Mindoro segmenthave undergone source contamination by crustal material fromthe North Palawan-Mindoro crustal block either during the collisionof this block with the Manila Trench or by subduction of sedimentsrich in this crustal material. A similar component has alsobeen detected in the Bataan segment but in minor amounts. Thetrace element and isotopic differences between the northernand southern sections of the arc are interpreted in terms ofvariable composition (i. e., variable amounts of a crustal componentintroduced from the Palawan-Mindoro crustal terrain) of themetasomatic fluids released into the source.     

Lead isotope and Pb-Pb model age determinations of ores from Central Europe and their metallogenetic interpretation

The paper presents lead isotope data from 211 samples from Phanerozoic lead-bearing ore occurrences in Central Europe, particularly from the Southern part of the former German Democratic Republic. The data are interpreted in terms of Amov's dynamic model of continuous lead isotope evolution. The relationships between thoro-genic and urano-genic model ages and the source of lead in different regional units are discussed. We observed differences in lead isotope evolution in the Hercynian internides and externides. Within the Moldanubian and Saxothuringian zones we distinguish five main lead-bearing ore associations: (1) Cambrian, stratiform base metal (Hermsdorf-Waldsassen; ²⁰⁶Pb/ ²⁰⁴Pb=17.50–17.70), (2) Devonian, vein type Sb-bearing, metamorphogene (neumühle-Hartmannsdorf; 17.80–18.00), (3) Upper Carboniferous-Permian, polymetallic, including tin, vein type (Kutna hora-Freiberg-Altenberg; 18.00–18.20), (4) Triassic (-Jurassic), Pb–Ba, vein type (Stibro-Halsbrücke; 18.20–18.60), (5) Cenozoic, polymetallic, vein type, riftogene (Roztoky-Banska tiavnica; 18.80–19.10). Pb isotope characteristics from ores of the Montagne Noire and the Brioude-Massiac district correspond to this subdivision. Ore associations from the Rheno-Hercynian zone display higher ²⁰⁷Pb/²⁰⁴Pb ratios which can be explained by more evolved and less metamorphosed source rocks. Mineralizations of the eastern Harz (Straßberg-Neudorf) belong to the Permian association, those from the western Harz (Clausthal-Bad Grund) to the Triassic-Jurassic. Because of Pb isotope agreement the stratabound Rammelsberg and the vein bound Ramsbeck-I mineralization are presumed to be isogenetic. Pb isotope identity of distinct mineralizations in the basement zone (Halsbrücke-Bad Grund) and in the Triassic sediments (Gorny Slask-Mechernich-Bleiglanzbänke) suggests a strong genetic coherence. Pb isotope conformity between the Upper Carboniferous-Permian-Triassic ore associations and Hercynian postkinematic granitoids, and lamprophyric rocks, also favours a close relationship. Pb isotope and other data indicate crustal sources. As the age of the ore associations decreases, crustal influences generally increase, apart from the Roztoky mineralization.     

The effect of bulk rock composition on the stability of amphibole in the upper mantle: Implications for solidus positions and mantle metasomatism

Summary The stability of pargasitic amphibole in the upper mantle is a function of water content and bulk rock composition, and under water-undersaturated conditions, the stability of amphibole controls the solidus position. Experiments in the system Tinaquillo peridotite +0.2% H₂O, a refractory peridotite under water-undersaturated conditions, show that amphibole is stable to 1030°C and 26 kb. In contrast, pargasitic amphibole is stable to 1150°C and 30 kb in Hawaiian pyrolite, a more fertile peridotite composition. This indicates that under water-undersaturated conditions, the most fertile part of a crystallizing mantle diapir with an inhomogeneous composition will solidify first while a more refractory component will contain an alkali-rich melt which will have the ability to metasomatize adjacent regions. The relative stabilities of amphibole in refractory and fertile bulk compositions may result in increasing rather than diminishing chemical contrasts in high temperature lherzolite, i.e. a process of metamorphic differentiation. Ti, Fe, Al and Na metasomatism can therefore be considered a normal occurrence associated with the upward migration and solidification of an H₂O-bearing mantle diapir.

---

Der Einfluß der Gesamtgesteins-Zusammensetzung auf die Stabilität von Amphibol im oberen Mantel: Bedeutung für Solidus-Positionen und Mantel-Metasomatose

Zusammenfassung Die Stabilität pargasitischer Amphibole im oberen Mantel ist eine Funktion von Wassergehalt und Gesamtgesteins-Zusammensetzung. Unter wasser-untersättigten Bedingungen, kontrolliert die Stabilität von Amphibol die Solidus-Position. Experimente in dem System Tinaquillo Peridotit +0,2% H₂O, einem refraktären Peridotit unter wasser-untersättigten Bedingungen, zeigen daß Amphibol bis 1030°C und 26 Kb stabil ist. Im Gegensatz dazu ist pargasitische Hornblende in einem Hawaii-Pyrolit, von mehr fertiler Peridotit-Zuammensetzung, bis 1150°C und 30 Kb stabil. Das zeigt, daß bei wasser-untersättigten Bedingungen der am meisten produktive Teil eines kristallisierenden Mantel-Diapirs mit inhomogener Zusammensetzung sich zuerst verfestigen wird, während eine mehr refraktäre Komponente eine alkali-reiche Schmelze enthalten wird, die wiederum die Fähigkeit hat, umliegende Bereiche metasomatisch zu beeinflussen. Die relativen Stabilitäten von Amphibol in refraktären und fertilen Gesamtzusammensetzungen können dazu führen, daß die chemischen Gegensätze in Hochtemperaturlherzoliten eher zunehmen als abnehmen, d. h. ein Prozeß metamorpher Differentiation. Ti, Fe, Al und Na Metasomatose können deshalb als ein verbreiteter Vorgang, der mit der Aufwärtsbewegung und Verfestigung eines H₂O-führenden Mantel-Diapirs assoziiert ist, betrachtet werden.

---

---

With 4 Figures     

An internal variable model for the creep of rocksalt

Summary The creep strain rate of rocksalt, like that of other ductile crystalline materials, can be described by a power law equation of the type ( ) ⁿ , where the active stress is the difference between the total deviatoric applied stress and an internal stress _i . In this paper, the origin and the nature of this internal stress, which develops during inelastic deformation of the material, are discussed. It is shown that this internal stress can serve as an internal (or state) variable in the constitutive model of rocksalt, which reflects the microstructure evolution of the material under the competitive action of hardening and recovery mechanisms.An analysis of experimental data, both our own and those taken from the literature, demonstrates that such a law is able to correctly reproduce rocksalt creep test results in the steady-state domain. The proposed model is in accordance with the macroscopic and microscopic behavior of salt, and with direct measurements of the internal stresses made by others on this material.     

A layered basic intrusion,deformed and metamorphosed in granulite faciès of the Sri Lanka basement

A layered basic intrusion has been found in the Central Granulite Belt of the Sri Lanka continental basement. It intruded parallel to bedding, before all or early during deformation of neighbouring metasediments. Deformation, affecting metasediments and the intrusion alike, includes flattening to c. 1/20 of the original thickness and NNW-stretching to c. 20 times the original length. The intrusion is now 170–300 m thick. Most of the deformation was acquired under granulite facies metamorphism. The intrusion was then folded, still at high T, by a large F₄-synform with an axis parallel to str₁ and a steep axial plane. A steep axial plane cleavage and minor folds are related to this big fold. Stretching continued along its axis. Late during formation of this fold a granite intruded, mainly following S₄ cleavage planes. The intrusion shows a homogeneous gabbroic series at the bottom, followed upwards by a differentiated and layered series. A thin sequence of ultramafic rocks occurs near the middle. This indicates multiple melt-injection. More homogeneous partly biotite-bearing amphibolites form the top of the succession. Magmatic layering is well preserved, but no magmatic minerals or grain fabrics have escaped deformation or metamorphism. Static annealing under granulite facies conditions outlasted all deformation and was accompanied and followed by the beginning of cooling. Hornblende-Plagioclase coronas formed round garnets at this stage. Geochemical work, carried out by STOSCH (1991) on our samples, confirms the cumulate nature of the rocks.

---

Zusammenfassung Eine geschichtete Basische Intrusion wurde im Central Granulite Belt der tiefen, kontinentalen Kruste Sri Lankas entdeckt. Sie intrudierte parallel zur Schichtung in benachbarte Sedimente, vor aller oder sehr früh in deren Deformation. Die Deformation, die Sedimente und die Intrusion in gleicher Weise betraf, führte zu Plättung auf das ca. 1/20 der Ausgangsdicke und zu NNW-Streckung auf das ca. 20fache der Ausgangslänge. Heute ist die Intrusion 170–300 m dick. Der Hauptteil der Deformation wurde unter Granulit-Fazies-Bedingungen erworben. Noch bei hoher T wurde die Intrusion durch eine große F₄-Falte gefaltet. Deren Achse liegt parallel der Streckungsrichtung, stri, ihre Achsenebene ist steil. Eine steile, Achsenebenen-parallele S₄-Schieferung und kleinere Falten entstanden mit ihr. Während der Bildung dieser Falte hielt die Streckung parallel ihrer Achse an. Spät während ihrer Bildung intrudierte ein Granit. Er folgt im wesentlichen S₄. Die Intrusion beginnt unten mit einer homogenen, gabbroiden Serie. Nach oben folgt eine differenzierte, geschichtete. Ein dünnes Paket ultramafischer Lagen erscheint nahe der Mitte. Es weist auf multiple Schmelz-Zufuhr hin. Homogenere Amphibolite, teils mit Biotit, bilden den obersten Teil. Magmatischer Lagenbau ist gut erhalten, lokal mit Gradierung. Magmatische Minerale oder Korngefüge haben Deformation und Metamorphose nicht überlebt. Statische Temperung unter Granulit-Fazies-Bedingungen überdauerte alle Deformation. Sie beginnt und dauert an bei bereits sinkender T. Hornblende-Plagioklas-Koronas bilden sich in diesem statischen Endstadium. STOSCH (1991) untersuchte unsere Proben von der Intrusion geochemisch. Er bestätigte die Kumulatnatur der Gesteine.

---

Résumé Une intrusion basique litée a été découverte dans la ceinture centrale granulitique du socle continental du Sri Lanka. L'intrusion s'est effectuée parallèlement à la stratification, avant la déformation des métasédiments encaissants ou tout au début de celleci. La déformation, qui affecte à la fois les métasédiments et l'intrusion, comporte un aplatissement jusqu'à ± 1/20 de l'épaisseur d'origine, et un allongement de ± 20 fois en direction NNW. L'intrusion présente actuellement une épaisseur de 170 à 300 m. La plus grande part de la déformation a été acquise dans les conditions du faciès des granulites. L'intrusion a ensuite été plissée, toujours à haute T, en un large synforme F₄ dont l'axe est parallèle à l'allongement stri et dont le plan axial est vertical. Ce grand pli est accompagné d'une schistosité S₄ plan-axiale redressée et de plis secondaires. L'allongement s'est poursuivi parallèlement à son axe. A la fin de la formation de ce pli, un granite s'est intrudé, qui suit en gros S₄. L'intrusion comporte à sa base une série gabbroïque homogène, suivie vers le haut par une série litée et différenciée. Elle contient, vers son milieu, une intercalation mince de roches ultramafiques. Ceci implique des injections répétées de magma. Le sommet est formé d'amphibolites homogènes partiellement biotitiques. Le litage magmatique est bien conservé, mais aucun minéral ou fabrique magmatique n'a échappé à la déformation et au métamorphisme. Un recuit statique dans les conditions granulitiques a suivi la déformation; il a été accompagné et suivi par le début du refroidissement. A ce stade, des couronnes à hornblende-plagioclase se sont formées autour des grenats. Une étude géochimique, effectuée en 1991 par Stosch sur nos échantillons confirme le caractère de cumulat des roches.

---

- . , . , , 1/20 20- NNW . 170–300 . . F₄, str₁, . , S₄, . . . S₄. , , . . , , . coxpa . , .. . , . . . . STOSCH (1991) .

---

List of abbreviations ss sedimentary bedding - s₁ first cleavage, plane of first flattening - str₁ Direction of first stretching; although L is usually used for lineations of different kind, including stretching, we use this term to point out that extension is proved in each case - F₂ second folds = first folds folding s₁ - s₂ second cleavage or plane of flattening - F₃ third folds - s₃ third cleavage or plane of flattening - F₄ fourth folds, folding s_1,2,3 and F_1,2,3 - s₄ fourth cleavage or plane of flattening - str₄ direction of fourth stretching - F_5,6 fifth and sixth folds - gf(m) granulite facies (metamorphism) - af(m) amphibolite facies (metamorphism) - KNa-f KNa-feldspar - pg plagioclase - f feldspar - opx orthopyroxene - cpx clinopyroxene - px pyroxene - hb hornblende - bi biotite - cc calcite - do dolomite - qz quartz - mt magnetite