Biogeochemical Characterizations and Reclamation Strategies of Saline Sodic Soil in Northeastern China

Soil salinity and sodicity is considered one of the most import impediments to agricultural development in Northeast China. The contents of TP and TK decrease with soil depth and high coefficients of variation were found in TOC, AN, and AP. Mean EC in the 0–50 cm soil layers ranged from 0.61 to 0.89 dS m^?1 and the average soluble ion concentrations in the topsoil (0–10 cm) were approximately 11.38 mmol L^?1 for Na⁺, 1.21 mmol L^?1 for Ca²⁺, and 0.40 mmol L^?1 for Mg²⁺. High SAR existed in the layers 10–50 cm, indicating the studied soil was bearing low salinity in the top layer and high sodic layer in the subsurface. The soil presented strong alkali reactions all through the profile with pH over 9.5. To improve and utilize saline sodic soil rationally, several strategies were put forward based on long‐term field studies and demonstration works. The results implied that ameliorating with sand, applying farm yard manure, regenerating salt tolerant grasses and leaching with groundwater, and growing rice were effective measures for improving physical and chemical qualities of saline sodic soil.     

Diurnal variation of ozone flux over corn field in Northwestern Shandong Plain of China

High concentration ground-level ozone(O3)has adverse effects on plant growth and photosynthesis.Compared to the O3concentration-based index,the O3flux-based(especially stomatal O3uptake)index has been considered the better criterion for assessing the impact of ozone on vegetation and ecosystems.This paper reports on a study of O3flux using the eddy covariance technique over a corn field in the Northwestern Shandong Plain of China.Diurnal variation of atmospheric O3concentration,deposition velocity and flux,and their relationships to environmental factors are analyzed.The results show that:(1)During the observation period(9 August–28 September,2011),there was a strong diurnal variation of O3concentration,with low(16.5 nL L?1)and high(60.1 nL L?1)O3mean concentrations observed around 6:30 and 16:00,respectively.Mean O3concentrations during daytime(6:00–18:00)and nighttime(18:00–6:00)were 39.8±23.1 and 20.7±14.1 nL L?1(mean±std),respectively.The maximum observed concentration was 97.5 nL L?1.The concentration was mainly affected by solar radiation and air temperature.(2)Whether daytime or nighttime,ground-level O3flux is always downward.The diurnal course of mean deposition velocity was divided into 4 phases:a low and stable process during nighttime,fast increasing in early morning,relatively large and steady changes around noon,and quickly decreasing in later afternoon.Daytime and nighttime mean deposition velocities were 0.29 and 0.09 cm s?1,respectively.The maximum deposition velocity was 0.81 cm s?1.The magnitude of deposition velocity was influenced by the corn growth period,and its diurnal variation was significantly correlated with global radiation and relative humidity.(3)O3flux was affected by variations of both O3concentration and deposition velocity,with mean O3fluxes-317.7 and?70.2 ng m?2s?1during daytime and nighttime,respectively.There was strong correlation between O3flux and CO2flux or latent heat flux.By comparing the deposition velocities of daytime and nighttime,we infer that stomatal uptake was probably the main sink of ground-level O3.     

Testing the survival of microfossils in artificial martian sedimentary meteorites during entry into Earth’s atmosphere: The STONE 6 experiment

If life ever appeared on Mars, could we find traces of primitive life embedded in sedimentary meteorites? To answer this question, a 3.5-byr-old volcanic sediment containing microfossils was embedded in the heat shield of a space capsule in order to test survival of the rock and the microfossils during entry into the Earth’s atmosphere (the STONE 6 experiment). The silicified volcanic sediment from the Kitty’s Gap Chert (Pilbara, Australia) is considered to be an excellent analogue for Noachian-age volcanic sediments. The microfossils in the chert are also analogues for potential martian life. An additional goal was to investigate the survival of living microorganisms (Chroococcidiopsis) protected by a 2-cm thick layer of rock in order to test whether living endolithic organisms could survive atmospheric entry when protected by a rocky coating.Mineralogical alteration of the sediment due to shock heating was manifested by the formation of a fusion crust, cracks in the chert due to prograde and retrograde changes of α quartz to β quartz, increase in the size of the fluid inclusions, and dewatering of the hydromuscovite-replaced volcanic protoliths. The carbonaceous microfossils embedded in the chert matrix survived in the rock away from the fusion crust but there was an increase in the maturity index of the kerogen towards the crust. We conclude that this kind of sediment can survive atmospheric entry and, if it contains microfossils, they could also survive. The living microorganisms were, however, completely carbonised by flame leakage to the back of the sample and therefore non-viable. However, using an analytical model to estimate the temperature reached within the sample thickness, we conclude that, even without flame leakage, the living organisms probably need to be protected by at least 5 cm of rock in order to be shielded from the intense heat of entry.     

Dhofar 225 and Dhofar 735: Relationship to CM2 chondrites and metamorphosed carbonaceous chondrites,Belgica‐7904 and Yamato‐86720

Abstract– Dhofar (Dho) 225 and Dho 735 are carbonaceous chondrites found in a hot desert and having affinities to Belgica‐like Antarctic chondrites (Belgica [B‐] 7904 and Yamato [Y‐] 86720). Texturally they resemble CM2 chondrites, but differ in mineralogy, bulk chemistry and oxygen isotopic compositions. The texture and main mineralogy of Dho 225 and Dho 735 are similar to the CM2 chondrites, but unlike CM2 chondrites they do not contain any (P, Cr)‐sulfides, nor tochilinite 6Fe_0.9S*5(Fe,Mg)(OH)₂. H₂O‐contents of Dho 225 and Dho 735 (1.76 and 1.06 wt%) are lower than those of CM2 chondrites (2–18 wt%), but similar to those in the metamorphosed carbonaceous chondrites of the Belgica‐like group. Bulk compositions of Dho 225 and Dho 735, as well as their matrices, have low Fe and S and low Fe/Si ratios relative to CM2 chondrites. X‐ray powder diffraction patterns of the Dho 225 and Dho 735 matrices showed similarities to laboratory‐heated Murchison CM2 chondrite and the transformation of serpentine to olivine. Dho 225 and 735’s oxygen isotopic compositions are in the high ¹⁸O range on the oxygen diagram, close to the Belgica‐like meteorites. This differs from the oxygen isotopic compositions of typical CM2 chondrites. Experimental results showed that the oxygen isotopic compositions of Dho 225 and Dhofar 725, could not be derived from those of typical CM2 chondrites via dehydration caused by thermal metamorphism. Dho 225 and Dho 735 may represent a group of chondrites whose primary material was different from typical CM2 chondrites and the Belgica‐like meteorites, but they formed in an oxygen reservoir similar to that of the Belgica‐like meteorites.     

Trace element partitioning between orthopyroxene and anhydrous silicate melt on the lherzolite solidus from 1.1 to 3.2 GPa and 1,230 to 1,535°C in the model system Na<Subscript>2</Subscript>O–CaO–MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>

We determined experimentally the Nernst distribution coefficient between orthopyroxene and anhydrous silicate melt for trace elements i in the system Na₂O–CaO–MgO–Al₂O₃–SiO₂ (NCMAS) along the dry model lherzolite solidus from 1.1 GPa/1,230°C up to 3.2 GPa/1,535°C in a piston cylinder apparatus. Major and trace element composition of melt and orthopyroxene were determined with a combination of electron microprobe and ion probe analyses. We provide partitioning data for trace elements Li, Be, B, K, Sc, Ti, V, Cr, Co, Ni, Rb, Sr, Y, Zr, Nb, Cs, Ba, La, Ce, Sm, Nd, Yb, Lu, Hf, Ta, Pb, U, and Th. The melts were chosen to be boninitic at 1.1 and 2.0 GPa, picritic at 2.3 GPa and komatiitic at 2.7 and 3.2 GPa. Orthopyroxene is Tschermakitic with 8 mol% Mg-Tschermaks MgAl[AlSiO₆] at 1.1 GPa while at higher pressure it has 18–20 mol%. The rare earth elements show a continuous, significant increase in compatibility with decreasing ionic radius from D _La^opx−melt ∼ 0.0008 to D _Lu^opx−melt ∼ 0.15. For the high-field-strength elements compatibility increases from D _Th^opx−melt ∼ 0.001 through D _Nb^opx−melt ∼ 0.0015, D _U^opx−melt ∼ 0.002, D _Ta^opx−melt ∼ 0.005, D _Zr^opx−melt ∼ 0.02 and D _Hf^opx−melt ∼ 0.04 to D _Ti^opx−melt ∼ 0.14. From mathematical and graphical fits we determined best-fit values for D ₀^M1, D ₀^M2, r ₀^M1, r ₀^M2, E ₀^M1, and E ₀^M2 for the two different M sites in orthopyroxene according to the lattice strain model and calculated the intracrystalline distribution between M1 and M2. Our data indicate extreme intracrystalline fractionation for most elements in orthopyroxene; for the divalent cations D _i ^M2−M1 varies by three orders of magnitude between D _Co^M2−M1 = 0.00098–0.00919 and D _Ba^M2−M1 = 2.3–28. Trivalent cations Al and Cr almost exclusively substitute on M1 while the other trivalent cations substitute on M2; D _La^M2−M1 reaches extreme values between 6.5 × 10⁷ and 1.4 × 10¹⁶. Tetravalent cations Ti, Hf, and Zr almost exclusively substitute on M1 while U and Th exclusively substitute on M2. Our new comprehensive data set can be used for polybaric-polythermal melting models along the Earth’s mantle solidus. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Origin of siderite mineralisation in Petrova and Trgovska Gora Mts., NW Dinarides

The Petrova and Trgovska Gora Mts. (Gora=Mountain) are Variscan basement units incorporated into the northwestern Dinarides during the Alpine orogeny. They host numerous siderite-quartz-polysulphide, siderite-chalcopyrite, siderite-galena and barite veins, as well as stratabound hydrothermal-replacement ankerite bodies within carbonates in non-metamorphosed, flysch-like Permo-Carboniferous sequences. The deposits have been mined for Cu, Pb, Ag and Fe ores since Medieval times. Fluid inclusion studies of quartz from siderite-polysulphide-quartz and barite veins of both regions have shown the presence of primary aqueous NaCl?CaCl₂±MgCl₂?H₂O±CO₂ inclusions. The quartz-sulphide stage of both regions show variable salinities; 2.7–26.2 wt% NaCl eq. for the Trgovska Gora region and 3.4–23.4 wt% NaCl eq. for the Petrova gora region, and similar homogenisation temperatures (100–230°C). Finally, barite is precipitated from low salinity-low temperature solutions (3.7–15.8 wt % NaCl equ. and 115–145°C). P-t conditions estimated via isochore construction yield formation temperatures between 180–250°C for the quartz-sulphide stage and 160–180°C for the barite stage, using a maximum lithostatic pressure of 1 kbar (cc. 3 km of overburden). The sulphur isotope composition of barite from both deposits indicates the involvement of Permian seawater in ore fluids. This is supported by the elevated bromium content of the fluid inclusion leachates (120–660 ppm in quartz, 420–960 ppm in barite) with respect to the seawater, indicating evaporated seawater as the major portion of the ore-forming fluids. Variable sulphur isotope compositions of galena, pyrite and chalcopyrite, between ?3.2 and +2.7‰, are interpreted as a product of incomplete thermal reduction of the Permian marine sulphate mixed with organically- and pyrite-bound sulphur from the host sedimentary rocks. Ore-forming fluids are interpreted as deep-circulating fluids derived primarily from evaporated Permian seawater and later modified by interaction with the Variscan basement rocks. ⁴⁰Ar/³⁹Ar data of the detrital mica from the host rocks yielded the Variscan age overprinted by an Early Permian tectonothermal event dated at 266–274 Ma. These ages are interpreted as those reflecting hydrothermal activity correlated with an incipient intracontinental rifting in the Tethyan domain. Nevertheless, 75 Ma recorded at a fine-grained sericite sample from the alteration zone is interpreted as a result of later resetting of white mica during Campanian opening/closure of the Sava back arc in the neighbouring Sava suture zone (Ustaszewski et al. 2008).     

U-Pb and Ar/Ar geochronological constraints on the exhumation history of the North Qinling terrane, China

The amphibolite facies grade North Qinling metamorphic unit forms the centre of the Qinling orogenic belt. Results of LA-ICP-MS U-Pb zircon, ⁴⁰Ar/³⁹Ar amphibole and biotite dating reveal its Palaeozoic tectonic history. U-Pb zircon dating of migmatitic orthogneiss and granite dykes constrains the age of two possible stages of migmatization at 517 ± 14 Ma and 445 ± 4.6 Ma. A subsequent granite intrusion occurred at 417 ± 1.6 Ma. The ⁴⁰Ar/³⁹Ar plateau ages of amphibole ranging from 397 ± 33 Ma to 432 ± 3.4 Ma constrain the cooling of the Qinling complex below ca. 540 °C and biotite ⁴⁰Ar/³⁹Ar ages at about 330–368 Ma below ca. 300 °C. The ages are used to construct a cooling history with slow/non-exhumation during 517– 445 Ma, a time-integrated cooling at a rate < 2.5 °C/Ma during the period of 445–410 Ma, an acceleration of cooling at a rate of 8 °C/Ma from 397 Ma to 368 Ma, and subsequently slow/non-cooling from 368 to 330 Ma. The data show a significant delay in exhumation after peak metamorphic conditions and a long period of tectonic quiescence after the suturing of the North China and South China blocks along the Shangdan suture. These relationships exclude classical exhumation models of formation and exhumation of metamorphic cores in orogens, which all imply rapid cooling after peak conditions of metamorphism.     

Oligo-Miocene shearing along the Ailao Shan–Red River shear zone: Constraints from structural analysis and zircon U/Pb geochronology of magmatic rocks in the Diancang Shan massif, SE Tibet, China

The left-lateral strike-slip shearing along the Ailao Shan–Red River (ASRR) shear zone in the Southeastern Tibet, China, has been widely advocated to be a result of the Indian–Eurasian plate collision and post-collisional processes. The Diancang Shan (DCS) massif, which occurs at the northwestern extension of the Ailao Shan massif, is a typical high-grade metamorphic complex aligned along the ASRR tectonic belt. Structural and microstructural analysis of the plutonic intrusions in the DCS revealed different types of granitic intrusions spatially confined to the shear zone and temporally related to the left-lateral shearing along the ASRR shear zone in the DCS massif. The combined structural and geochronological results of SHRIMP-II and LA-ICP-MS zircon U/Pb isotopic dating have revealed successive magmatic intrusions and crystallization related to the Oligo-Miocene shearing in the DCS massif. The pre-, early- and syn-kinematic emplacements are linked to regional high-temperature deformation (lower amphibolite facies) at relatively deep crustal levels. The zircon U/Pb geochronological results suggest that the left-lateral ductile shearing along the ASRR shear zone was initiated at ca. 31 Ma, culminated between ca. 27 and 21 Ma resulting in high-temperature metamorphic conditions and slowed down at ca. 20 Ma at relatively low-temperatures.     

Retrograde formation of NaCl-scapolite in high pressure metaevaporites from the Cordilleras Béticas (Spain)

A Permo-Triassic pelite-carbonate rock series (with interacalated metabasitic rocks) in the Cordilleras Béticas, Spain, was metamorphosed during the Alpine metamorphism at high pressures (P _min near 18 kbar). The rocks show well preserved sedimentary features of evaporites such as pseudomorphs of talc, of kyanite-phengitetalc-biotite, and of quartz after sulfate minerals, and relicts of baryte, anhydrite, NaCl, and KCl, indicating a salt-clay mixture of illite, chlorite, talc, and halite as the original rock. The evaporitic metapelites have a whole rock composition characterized by high Mg/(Mg+Ca) ratios>0.7, variable alkaline and Sr, Ba, contents, but are mostly K₂O rich (<8.8 wt%). The F (<2600 ppm), Cl (<3600 ppm), and P₂O₅ (<0.24 wt%) contents are also high. The pelitic member of this series is a fine grained biotite rock. Kyanite-phengite-talc-biotite aggregates in pseudomorphs developed in the high pressure stage. Albite-rich plagioclase was formed when the rocks crossed the albite stability curve in the early stages of the uplift. Scapolite, rich in NaCl (Ca/(Ca+Na) mol% 24–40) and poor in SO₄, with Cl/(Cl+CO₃) ratios between 0.6 and 0.8, formed as porphyroblasts, sometimes replacing up to 60% of the rock in a late stage of metamorphism (between 10 and 5 kbar, near 600°C). No reaction with albite is observed, and the scapolite formed from biotite by: $$\begin{gathered} Al - biotite + CaCO_3 + NaCl + SiO_2 \hfill \\ = Al - poor biotite + scapolite + MgCO_3 + KCl \hfill \\ + MgCl_2 + H_2 O \hfill \\ \end{gathered}$$ Calculated fluid composition in equilibrium with scapolite indicates varying salt concentrations in the fluid. Distribution of Cl and F in biotite and apatite also indicates varying fluid compositions.