An Attempt to Partition Stomatal and Non-stomatal Ozone Deposition Parts on a Short Grassland

To evaluate the damaging effect of tropospheric ozone on vegetation, it is important to evaluate the stomatal uptake of ozone. Although the stomatal flux is a dominant pathway of ozone deposition onto vegetated surfaces, non-stomatal uptake mechanisms such as soil and cuticular deposition also play a vital role, especially when the leaf area index \({LAI}< 4\). In this study, we partitioned the canopy conductance into stomatal and non-stomatal components. To calculate the stomatal conductance of water vapour for sparse vegetation, we firstly partitioned the latent heat flux into effects of transpiration and evaporation using the Shuttleworth–Wallace (SW) model. We then derived the stomatal conductance of ozone using the Penman–Monteith (PM) theory based on the similarity to water vapour conductance. The non-stomatal conductance was calculated by subtracting the stomatal conductance from the canopy conductance derived from directly-measured fluxes. Our results show that for short vegetation (LAI \(=\) 0.25) dry deposition of ozone was dominated by the non-stomatal flux, which exceeded the stomatal flux even during the daytime. At night the stomatal uptake of ozone was found to be negligibly small. In the case of vegetation with \({LAI}\approx 1\), the daytime stomatal and non-stomatal fluxes were of the same order of magnitude. These results emphasize that non-stomatal processes must be considered even in the case of well-developed vegetation where cuticular uptake is comparable in magnitude with stomatal uptake, and especially in the case of vegetated surfaces with \({LAI}< 4\) where soil uptake also has a role in ozone deposition.     

Defining deep decarbonization pathways for Switzerland: an economic evaluation

This article simulates deep decarbonization pathways for a small open economy that lacks the usual avenues for large CO₂ reductions – heavy industry and power generation. A computable general equilibrium model is used to assess the energy and economic impacts of the transition to only one ton of CO₂ emissions per capita in 2050. This represents a 76% reduction with respect to 1990 levels, while the population is expected to be 46% larger and GPD to increase by 90%. The article discusses several options and scenarios that are compatible with this emissions target and compares them with a reference scenario that extrapolates already-decided climate and energy policy instruments. We show that the ambitious target is attainable at moderate welfare costs, even if it needs very high carbon prices, and that these costs are lower when either CO₂ can be captured and sequestered or electricity consumption can be taxed sufficiently to stabilize it.

Policy relevance

In the context of COP 21, all countries must propose intended contributions that involve deep decarbonization of their economy over the next decades. This article defines and analyses such pathways for Switzerland, taking into consideration the existing energy demand and supply and also already-defined climate policies. It draws several scenarios that are compatible with a target of 1 ton of CO₂ emissions per capita in 2050. This objective is very challenging, especially with the nuclear phase out decided after the disaster in Fukushima and the political decision to balance electricity trade. Nevertheless, it is possible to design several feasible pathways that are based on different options. The economic cost is significant but affordable for the Swiss economy. The insights are relevant not only for Switzerland, but also for other industrialized countries when defining their INDCs.     

Options to overcome the barriers to pricing European agricultural emissions

Although agriculture could contribute substantially to European emission reductions, its mitigation potential lies untapped and dormant. Market-based instruments could be pivotal in incentivizing cost-effective abatement. However, sector specificities in transaction costs, leakage risks and distributional impacts impede its implementation. The significance of such barriers critically hinges on the dimensions of policy design. This article synthesizes the work on emissions pricing in agriculture together with the literature on the design of market-based instruments. To structure the discussion, an options space is suggested to map policy options, focusing on three key dimensions of policy design. More specifically, it examines the role of policy coverage, instruments and transfers to farmers in overcoming the barriers. First, the results show that a significant proportion of agricultural emissions and mitigation potential could be covered by a policy targeting large farms and few emission sources, thereby reducing transaction costs. Second, whether an instrument is voluntary or mandatory influences distributional outcomes and leakage. Voluntary instruments can mitigate distributional concerns and leakage risks but can lead to subsidy lock-in and carbon price distortion. Third, the impact on transfers resulting from the interaction of the Common Agricultural Policy (CAP) with emissions pricing will play a key role in shaping political feasibility and has so far been underappreciated.

POLICY RELEVANCE

Following the 2015 Paris Agreement, European climate policy is at a crossroads. Achieving cost-effectively the 2030 and 2050 European targets requires all sectors to reduce their emissions. Yet, the cornerstone of European climate policy, the European Union Emissions Trading System (EU ETS), covers only about half of European emissions. Major sectors have been so far largely exempted from carbon pricing, in particular transport and agriculture. While transport has been increasingly under the spotlight as a possible candidate for an EU ETS sectoral expansion, policy discussions on pricing agricultural emissions have been virtually absent. This article attempts to fill this gap by investigating options for market-based instruments to reduce agricultural emissions while taking barriers to implementation into account.     

Multiple Random Walk Simulation: A Fast Method to Map Grade Uncertainty with Large Datasets

Multiple Random Walk Simulation consists of a methodology adapted to run fast simulations if close-spaced data are abundant (e.g., short-term mining models). Combining kriging with the simulation of random walks attempts to approximate traditional simulation algorithm results but at a computationally faster way when there is a large amount of conditioning samples. This paper presents this new algorithm illustrating the situations where the method can be used properly. A synthetic study case is presented in order to illustrate the Multiple Random Walk Simulation and to analyze the speed and goodness of its results against the ones from using Turning Bands Simulation and Sequential Gaussian Simulation.     

For your eyes only? Evaluating a coordinated and multiple views tool with a map,a parallel coordinated plot and a table using an eye-tracking approach

Geographic visualization tools with coordinated and multiple views (CMV) typically provide sets of visualization methods. Such configuration gives users the possibility of investigating data in various visual contexts; however, it can be confusing due to the multiplicity of visual components and interactive functions. We addressed this challenge and conducted an empirical study on how a CMV tool, consisting of a map, a parallel coordinate plot (PCP), and a table, is used to acquire information. We combined a task-based approach with eye-tracking and usability metrics since these methods provide comprehensive insights into users’ behaviour. Our empirical study revealed that the freedom to choose visualization components is appreciated by users. The individuals worked with all the available visualization methods and they often used more than one visualization method when executing tasks. Different views were used in different ways by various individuals, but in a similarly effective way. Even PCP, which is claimed to be problematic, was found to be a handy way of exploring data when accompanied by interactive functions.     

Edge-to-Stem Variability in Wet-Canopy Evaporation From an Urban Tree Row

Evaporation from wet-canopy (\(E_\mathrm{C}\)) and stem (\(E_\mathrm{S}\)) surfaces during rainfall represents a significant portion of municipal-to-global scale hydrologic cycles. For urban ecosystems, \(E_\mathrm{C}\) and \(E_\mathrm{S}\) dynamics play valuable roles in stormwater management. Despite this, canopy-interception loss studies typically ignore crown-scale variability in \(E_\mathrm{C}\) and assume (with few indirect data) that \(E_\mathrm{S}\) is generally \({<}2\%\) of total wet-canopy evaporation. We test these common assumptions for the first time with a spatially-distributed network of in-canopy meteorological monitoring and 45 surface temperature sensors in an urban Pinus elliottii tree row to estimate \(E_\mathrm{C}\) and \(E_\mathrm{S}\) under the assumption that crown surfaces behave as “wet bulbs”. From December 2015 through July 2016, 33 saturated crown periods (195 h of 5-min observations) were isolated from storms for determination of 5-min evaporation rates ranging from negligible to 0.67 \(\hbox {mm h}^{-1}\). Mean \(E_\mathrm{S}\) (0.10 \(\hbox {mm h}^{-1}\)) was significantly lower (\(p < 0.01\)) than mean \(E_\mathrm{C}\) (0.16 \(\hbox {mm h}^{-1}\)). But, \(E_\mathrm{S}\) values often equalled \(E_\mathrm{C}\) and, when scaled to trunk area using terrestrial lidar, accounted for 8–13% (inter-quartile range) of total wet-crown evaporation (\(E_\mathrm{S}+E_\mathrm{C}\) scaled to surface area). \(E_\mathrm{S}\) contributions to total wet-crown evaporation maximized at 33%, showing a general underestimate (by 2–17 times) of this quantity in the literature. Moreover, results suggest wet-crown evaporation from urban tree rows can be adequately estimated by simply assuming saturated tree surfaces behave as wet bulbs, avoiding problematic assumptions associated with other physically-based methods.     

Photochemical activation of chlorine by iron-oxide aerosol

The photochemical activation of chlorine by dissolved iron in artificial sea-salt aerosol droplets and by highly dispersed iron oxide (Fe₂O₃) aerosol particles (mainly hematite, specific surface ~150 m² g^?1) exposed to gaseous HCl, was investigated in humidified air in a Teflon simulation chamber. Employing the radical-clock technique, we quantified the production of gaseous atomic chlorine (Cl) from the irradiated aerosol. When the salt aerosol contained Fe₂O₃ at pH 6, no significant Cl production was observed, even if the dissolution of iron was forced by “weathering” (repeatedly freezing and thawing for five times). Adjusting the pH in the stock suspension to 2.6, 2.2, and 1.9 and equilibrating for one week resulted in a quantifiable amount of dissolved iron (0.03, 0.2, and 0.6 mmol L^?1, respectively) and in gaseous Cl production rates of ~1.6, 6, and 8?×?10²¹ atoms cm^?2 h^?1, respectively. In a further series of experiments, the pure Fe₂O₃ aerosol was exposed to various levels of gaseous hydrogen chloride (HCl). The resulting Cl production rates ranged from 8?×?10²⁰ Cl atoms cm^?2 h^?1 (at ~4 ppb HCl) to 5?×?10²² Cl atoms cm^?2 h^?1 (at ~350 ppb HCl) and confirmed the uptake and conversion of HCl to atomic Cl (at HCl to Cl conversion yields of 2–5 %, depending on the relative humidity). The Fe₂O₃ experiments indicate that iron-induced Cl formation may be important for highly soluble combustion-aerosol particles in marine environments in the presence of gaseous HCl.     

Momentum- and Heat-Flux Parametrization at Dome C,Antarctica: A Sensitivity Study

An extensive meteorological observational dataset at Dome C, East Antarctic Plateau, enabled estimation of the sensitivity of surface momentum and sensible heat fluxes to aerodynamic roughness length and atmospheric stability in this region. Our study reveals that (1) because of the preferential orientation of snow micro-reliefs (sastrugi), the aerodynamic roughness length \(z_{0}\) varies by more than two orders of magnitude depending on the wind direction; consequently, estimating the turbulent fluxes with a realistic but constant \(z_{0}\) of 1 mm leads to a mean friction velocity bias of \(24\,\%\) in near-neutral conditions; (2) the dependence of the ratio of the roughness length for heat \(z_{0t}\) to \(z_{0}\) on the roughness Reynolds number is shown to be in reasonable agreement with previous models; (3) the wide range of atmospheric stability at Dome C makes the flux very sensitive to the choice of the stability functions; stability function models presumed to be suitable for stable conditions were evaluated and shown to generally underestimate the dimensionless vertical temperature gradient; as these models differ increasingly with increases in the stability parameter z / L, heat flux and friction velocity relative differences reached \(100\,\%\) when \(z/L > 1\); (4) the shallowness of the stable boundary layer is responsible for significant sensitivity to the height of the observed temperature and wind data used to estimate the fluxes. Consistent flux results were obtained with atmospheric measurements at heights up to 2 m. Our sensitivity study revealed the need to include a dynamical parametrization of roughness length over Antarctica in climate models and to develop new parametrizations of the surface fluxes in very stable conditions, accounting, for instance, for the divergence in both radiative and turbulent fluxes in the first few metres of the boundary layer.     

The influence of elevation on soil properties and forest litter in the Siliceous Moncayo Massif,SW Europe

Understanding the effects of elevation and related factors (climate, vegetation) on the physical and chemical soil properties can help to predict changes in response to future climate or afforestation forcings. This work aims to contribute to the knowledge of soil evolution and the classification of forest soils in relation to elevation in the montane stage, with special attention to podzolization and humus forms. The northern flank of the Moncayo Massif (Iberian Range, SW Europe) provides a unique opportunity to study a forest soils catena within a consistent quartzitic parent material over a relatively steep elevation gradient. With increasing elevation, pH, base saturation, exchangeable potassium, and fine silt-sized particles decrease significantly, while organic matter, the C/N ratio, soil aggregate stability, water repellency and coarse sand-sized particles increase significantly. The soil profiles shared a set of properties in all horizons: loamy-skeletal particle-size, extreme acidity (pH-H₂O<5.6) and low base saturation (<50%). The most prevalent soil forming processes in the catena include topsoil organic matter accumulation and even podzolization, which increases with elevation. From the upper to lower landscape positions of wooded montane stage of the Moncayo Massif, mull-moder-mor humus and an Umbrisol-Cambisol-Podzol soil unit sequences were found.     

“Clusters” or “communities”? Analysing the spatial agglomeration of video game companies in Australia

In this paper, I question whether agglomerations of video game companies in Australia function as clusters (spatially bound) or rather as communities (not spatially bound). The two case studies included in the analysis are the main agglomerations of video companies in Australia—Brisbane and Melbourne. The data have been collected through 21 semi-structured interviews performed between 2012 and 2014. The main findings are as follows: (1) the primary reason that video game companies come together is to share tacit knowledge and skilled labour; (2) these agglomerations do not have the attributes of “creative clusters”; and (3) new technologies enable experienced game developers to operate at the geographic periphery of the main agglomeration of developers. Therefore, to paint a more accurate picture of why some video game companies are successful—beyond simply positive externalities associated with co-localization—I propose the term “networked communities.” This recognizes that social networks at varying scales (local, national, international) are being developed by video game firms in order to thrive and reach a global audience.