Ecophysiological Studies on Size-fractionated Phytoplankton Populations by Tracer Technique in Wadi el Majanin Dam,Libya

Wadi el Majanin, one of the largest hydraulic structures in Libya was studied for ecophysiological aspects in relation to ambient environment. The waterbody is alkaline (pH=7.2) and characteristic of hydrogen-carbonate (144.8 mg L^–1 CaCO₃) system. Vertical extinction coefficients (> 4.8) indicate very high (biogenic) turbidity. Conspicuous variations of a quantitative kind in algal development (e.g., Pediastrum bloom) together with abundant diatom populations (chlorococcales-diatom assemblage), apart from very common occurrence of cyanobacteria and euglenoids show eutrophic water condition. Winter-summer alternation induced pronounced seasonal variability in the rates of in situ planktonic algal photosynthetic activities (285.7...1305 mg m^–3 d^–1 C). Dark fixation activity, attributed largely to bacterial production, oscillated by order of 2-fold magnitude, characterized by summer maxima (47.6 mg m^–3 d^–1 C). Size-fractional analysis established that smaller forms (< 60 μm), broadly regarded nanno-phytoplankton, frequently dominated (c. 70%) overall algal productivity.     

Numerical Analysis of the Behavior of A New Aeronautical Alloy (Ti555-03) Under the Effect of A High-Speed Water Jet

In this paper, we present a numerical simulation of a water jet impacting a new aeronautical material Ti555-03 plate.The Computational Fluid Dynamics(CFD) behavior of the jet is investigated using a FV(Finite Volume) method.The Fluid–Structure Interaction(FSI) is studied using a coupled SPH(Smoothed Particle Hydrodynamics)-FE(Finite Element) method. The jets hit the metal sheet with an initial velocity 500 m/s. Two configurations which differ from each other by the position(angle of inclination) of the plate relatively to the axis of revolution of the jet inlet are investigated in this study. The objective of this study is to predict the impact of the fluid produced at high pressure and high speed especially at the first moment of impact. Numerical simulations are carried out under ABAQUS. We have shown in this study that the inclination of the titanium alloy plate by 45° stimulates the phenomenon of recirculation of water. This affects the velocity profile, turbulence and boundary layers in the impact zone. The stagnation zone and the phenomenon of water recirculation are strongly influenced by the slope of the plate which gives a pressure gradient and displacement very important between the two configurations. Fluctuations of physical variables(displacement and pressure) prove the need for a noise and vibratory study. These predictions will subsequently be used for the modeling of the problem of an orthogonal cut in a high-speed machining process assisted by high-pressure water jet.     

Seismic risk assessment for developing countries: Pakistan as a case study

Modern Earthquake Risk Assessment (ERA) methods usually require seismo-tectonic information for Probabilistic Seismic Hazard Assessment (PSHA) that may not be readily available in developing countries. To bypass this drawback, this paper presents a practical event-based PSHA method that uses instrumental seismicity, available historical seismicity, as well as limited information on geology and tectonic setting. Historical seismicity is integrated with instrumental seismicity to determine the long-term hazard. The tectonic setting is included by assigning seismic source zones associated with known major faults. Monte Carlo simulations are used to generate earthquake catalogues with randomized key hazard parameters. A case study region in Pakistan is selected to demonstrate the effectiveness of the method. The results indicate that the proposed method produces seismic hazard maps consistent with previous studies, thus being suitable for generating such maps in regions where limited data are available. The PSHA procedure is developed as an integral part of an ERA framework named EQRAM. The framework is also used to determine seismic risk in terms of annual losses for the study region.     

Vibration analysis of damaged and undamaged steel structure systems: cantilever column and frame

This paper presents the experimental and numerical studies conducted on a steel column and a steel frame structure using free vibration analysis. The effects of damages on structures were investigated, which were simulated by introducing multiple cracks at different locations in the experimental and numerical models. The acceleration responses of the test models, were recorded through an accelerometer, and were used to calibrate the numerical models developed in finite element based software. Modal frequencies of damaged and undamaged structures were compared and analyzed, to derive relationships for damaged and undamaged structures' frequencies in terms of crack depth. It was found that, due to the presence of cracks, the mechanical properties of a structure changes, whereby, the modal frequencies decrease. An approximately linear trend was observed for the frequency decrease with the increase in crack depth, which was also confirmed by the numerical models. The derived relationships were extended to further develop a mechanics-based damage scale for steel structures, to help facilitate structural health monitoring and screening of vulnerable structures.     

Turbulence Study Around Bar in a Braided River Model

Water Resources - Turbulent flow is a flow regime which is described by the anarchic property changes. This includes the rapid variation of pressure, high momentum convection and flow velocity in...     

A fast joint seismic data reconstruction by sparsity‐promoting inversion

Seismic field data are often irregularly or coarsely sampled in space due to acquisition limits. However, complete and regular data need to be acquired in most conventional seismic processing and imaging algorithms. We have developed a fast joint curvelet‐domain seismic data reconstruction method by sparsity‐promoting inversion based on compressive sensing. We have made an attempt to seek a sparse representation of incomplete seismic data by curvelet coefficients and solve sparsity‐promoting problems through an iterative thresholding process to reconstruct the missing data. In conventional iterative thresholding algorithms, the updated reconstruction result of each iteration is obtained by adding the gradient to the previous result and thresholding it. The algorithm is stable and accurate but always requires sufficient iterations. The linearised Bregman method can accelerate the convergence by replacing the previous result with that before thresholding, thus promoting the effective coefficients added to the result. The method is faster than conventional one, but it can cause artefacts near the missing traces while reconstructing small‐amplitude coefficients because some coefficients in the unthresholded results wrongly represent the residual of the data. The key process in the joint curvelet‐domain reconstruction method is that we use both the previous results of the conventional method and the linearised Bregman method to stabilise the reconstruction quality and accelerate the recovery for a while. The acceleration rate is controlled through weighting to adjust the contribution of the acceleration term and the stable term. A fierce acceleration could be performed for the recovery of comparatively small gaps, whereas a mild acceleration is more appropriate when the incomplete data has a large gap of high‐amplitude events. Finally, we carry out a fast and stable recovery using the trade‐off algorithm. Synthetic and field data tests verified that the joint curvelet‐domain reconstruction method can effectively and quickly reconstruct seismic data with missing traces.     

Assessment of future water provisioning and sediment load under climate and LULC change scenarios in a peninsular river basin,India

Assessment of the impact of changes in climate and land use and land cover (LULC) on ecosystem services (ES) is important for planning regional-scale strategies for sustainability and restoration of ES. The Upper Narmada River Basin (UNRB) in peninsular India has undergone rapid LULC change due to recent agricultural expansion. The impact of future climate and LULC change on ES in the UNRB is quantified and mapped using the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST 3.3.0) tool. Our results show that water yield is projected to increase under climate change (about 43% for representative concentration pathway 4.5 for 2031–2040), whereas it is projected to decrease under the LULC change scenario. Sediment export is projected to increase (by 54.53%) under LULC change for 2031–2040. Under the combined effect of climate and LULC change, both water yield and sediment export are expected to increase. Climate change has a greater impact on projected water yield than LULC change, whereas LULC has greater impact on sediment export. Spatial analysis suggests a similar trend of variation in relative difference (RD) of ES in adjacent sub-basins. The quantified changes in ES provisioning will benefit future land management, particularly for operation of the Rani Avanti Bai Sagar Reservoir downstream of the UNRB.     

Permian felsic magmatism in the Neoproterozoic Nagar Parkar Igneous Complex of the Malani Igneous Suite: Evidence from zircon U–Pb age

We report Permian (ca. 272 Ma ±5.4 Ma) felsic dykes that intrude into the Neoproterozoic (ca. 750 Ma) magmatic suite of the Nagar Parkar Igneous Complex (NPIC), the western extension of the Malani Igneous Suite (MIS). The NPIC consists of Neoproterozoic basement amphibolites and granites (riebeckite–aegirine gray granites and the biotite–hornblende pink granites), all of which are intruded by several generations of mafic and felsic dykes. Granitic magmatism occurred in the Late Neoproterozoic (ca. 750 Ma) due to the subduction‐, followed by the rift‐related tectonic regime during the breakup of the Rodinia supercontinent. U–Th–Pb zircon and monazite CHIME age data of 700–800 Ma from the earlier generation porphyritic felsic dykes suggest the dyke intrusion was coeval or soon after the emplacement of the host granites. Our findings of Permian age orthophyric felsic dykes provide new insights for the prevalence of active tectonics in the MIS during late Paleozoic. Textural features and geochemistry also make the orthophyric dykes distinct from the early‐formed porphyritic dykes and the host granites. Our newly obtained age data combined with geochemistry, suggest the existence of magmatism along the western margin of India (peri‐Gondwana margin) during Permian. Like elsewhere in the region, the Permian magmatism in the NPIC could be associated with the rifting of the Cimmerian micro‐continents from the Gondwana.     

Megacities – megarisks

We review the definitions, population trends, and characteristics of megacities. Characteristics of megacities are, apart from their size, their complexity in terms of administration, infrastructure, traffic, etc., and at the same time the speed of change. Vulnerabilities and risk potential are discussed using the examples of Mexico City and Mumbai. We present the experience accumulated in the 6 years work of the Earthquakes and Megacities Initiative (EMI, ) with more than 20 large cities around the world, mostly located in the developing world. On this background we analyze obstacles that keep megacities from developing an efficient approach towards disaster mitigation and define a strategy that might overcome these problems. The key element of this strategy is the development of a Disaster Risk Management Master Plan (DRMMP) for cities. Currently the Istanbul Earthquake Master Plan (IEMP) serves as best example for an appropriate strategy for disaster reduction in megacities.     

Statistical forecast of temperature dynamics within month on the basis of hydrodynamic model outputs

A method of a long-term forecast of smoothed temperature dynamics within month with a zero lead time for some Russian sites is considered. A procedure of a search for optimum predictors and a regression-analog prediction scheme are described. Hydrodynamic forecasts for the first ten days of the prognostic month are used as a predictor. Results of the prediction scheme verification on independent data with the use of hydrodynamic model outputs are discussed. Ways to improve the prediction scheme are suggested.