Influence of the seagrass,Zostera marina L., on current flow

A salt-water flume was used to describe the mechanics of current flow around an articial Zostera marina meadow. Shear velocity and roughness height were positively correlated with seagrass surface area, and were positively/negatively correlated with current velocity. Current velocity intrusion into the meadow before diminution and maximum reduction (both at the 2 cm height line) proceed by factors of 1·25 and 2·07 cm into the meadow per cm s^?1 of current velocity, respectively.Froude number was correlated with mean bending angle of the canopy as a whole. Maximum bending had occurred with Froude = 1, but most bending had taken place by Froude = 0·4, a velocity of 40–50 cm s^?1 in this experiment.The meadow edge is the most dynamic zone of a seagrass meadow in regard to current flow. Bending of the shoot canopy is a mechanism for re-direction of current flow and in-canopy reduction of current velocity. Meadow dimensions may be regulated by scouring processes in different hydraulic regimes. Shoot bending and subsequent in-meadow current velocity reduction are mechanisms that affect self-shading and photosynthetic capabilities as well as providing habitat stability.     

Site evaluation and RFI spectrum measurements in Portugal at the frequency range 0.408–10 GHz for a GEM polarized galactic radio emission experiment

We probed for radio frequency interference (RFI) at three potential galactic emission mapping experiment (GEM) sites in Portugal using custom made omnidirectional disconic antennas and directional pyramidal horn antennas. For the installation of a 10-m dish dedicated to the mapping of polarized galactic emission foreground planned for 2005–2007 in the 5–10 GHz band, the three sites chosen as suitable to host the antenna were surveyed for local radio pollution in the frequency range 0.01–10 GHz. Tests were done to look for radio broadcasting and mobile phone emission lines in the radio spectrum. The results show one of the sites to be almost entirely RFI clean and showing good conditions to host the experiment.     

Use of radon isotopes,gamma radiation and dye tracers to study water interactions in a small stream in Brazil

In this study, natural (²²²Rn) and fluorescent (uranin) tracers were used to investigate the interactions between surface and subsurface waters in a small hydrographical basin located in the southeast region of Brazil. Levels of ²²²Rn were measured in 117 water samples with the use of an alpha solid-state detector. After the identification of the probable discharge sections along the stream, a measurement of the natural flows, upstream and downstream of these sections, was done with the use of a fluorimeter and fluorescent tracers. Also, scanning was done to verify a correlation between the natural gamma radiation and the ²²²Rn in the areas where its activity was higher. The results showed some sections where the ²²²Rn activity is more significant and contributed to the growth of the flows along the stream. It was possible to confirm a correlation between the discharge sections and the natural gamma radiation, what can be used as a preliminary approach to finding these sections in scenarios similar to the one studied here.     

Pilocarpus microphyllus seedling growth threatened by climate change: an ecophysiological approach

Theoretical and Applied Climatology - The climate change endangers many species of the Amazon Forest. An example, in the endangered medicinal species Pilocarpus microphyllus (popularly known as...     

Effect of phosphorus on the attenuation of lead and chromium transport in soils

This study analyses the adsorption of Pb(II) and Cr(III) in soils. These metals are commonly found together in nature in urban wastes or industrial spillages, and the theoretical approach of the work was to evaluate the response of the soil to continuous Cr and Pb spillages to soil in terms of several physicochemical parameters. The influence of an anthropogenic input of phosphorus was evaluated. Continuous flow experiments were run in duplicates in acrylic columns (25 cm × 3.2 cm). The influent Cr(III) and Pb(II) solutions of 10 mg l^?1 and 25 mg l^?1 at pH 5 were pumped upward through the bottom of the columns to ensure saturation flow conditions. Also, successive experiments were run with the above concentrations of Cr(III) and Pb(II) and NaH₂PO₄, keeping metal to phosphorus ratio of 1:0, 1:0.1 and 1:1. Modelling parameters included Freundlich and Langmuir equations, together with the Two-site adsorption model using CXTFIT code. Results obtained allowed concluding that Pb(II) adsorption presents a certain degree of irreversibility and the continued spillages over soil increment the fraction which is not easily desorbed. Cr(III) desorption was almost complete, evidencing its high mobility in nature. The presence of an anthropogenic input of phosphorus leads to a marked increase of both Pb(II) and Cr(III) adsorption in soils. Z-potential measurements allow to discard the electrostatic attraction of Cr(III) and Pb(II) with the surface charged soil as the dominant process of metal sorption. Instead, CheaqsPro simulation allows to identify PbH₂PO₄ ⁺, PbHPO₄ (aq) and CrHPO₄ ⁺ as the dominant species which regulate Cr(III) and Pb(II) transport in soils.     

Digital complex correlator for a C-band polarimetry survey

The international Galactic Emission Mapping project aims to map and characterize the polarization field of the Milky Way. In Portugal it will map the sky polarized emission of the Northern Hemisphere in C-band and provide templates for map calibration and foreground control of microwave space data to be provided by ESA Planck Surveyor mission and later missions. The receiver system is equipped with a novel receiver with a full digital back-end using a low-cost Field Programmable Gate Array without compromising its performance relation. This new digital backend comprises a base-band complex cross-correlator outputting the four Stokes parameters of the incoming polarized radiation. In this document we describe the design and implementation of the complex correlator using the FPGA and the dedicated digitizers at each receiver arm, detailing the method applied at the several algorithm stages. This correlator is suitable for large sky area polarization continuum surveys.     

Technical guidelines for the assessment of earthquake induced liquefaction hazard at urban scale

Bulletin of Earthquake Engineering - Microzonation for earthquake-induced liquefaction hazard is the subdivision of a territory at a municipal or submunicipal scale in areas characterized by the...     

Site classification using equivalent soil profiles for building-liquefaction interaction

The seismic behaviour of a building on a liquefiable deposit is a complex interaction which involves quantifying both shaking induced damage and permanent ground deformation-related damage. In this paper the key parameters that influence both surface shaking and foundation settlements have been identified as the depth, thickness and liquefaction resistance of an equivalent liquefiable layer. These parameters can be used to develop an ‘equivalent soil profile’ that is analogous to the equivalent single degree-of-freedom that reduces the complexity of the dynamic response of a building into comparable and easily understood quantities. The equivalent soil profile is quantified independent of the seismic hazard, making it compatible with performance based design and assessment frameworks such that the building and soil profile can be directly assessed at different levels of seismic hazard. Several numerical studies are presented that demonstrate the influence of these key parameters on the ground surface shaking and foundation settlement. A set of criteria are proposed for classifying soil profiles into 22 different soil classes for regional loss assessment. An algorithm was developed for automatically fitting the equivalent soil profile to a cone penetration test trace and issues with the fitting are discussed. Field reconnaissance was undertaken to collect additional data to support existing datasets on the performance of buildings in Adapazari, during the 1999 Kocaeli, Turkey, earthquake (Mw = 7.4). The field case history data was used to investigate the correlation between the depth, thickness and liquefaction resistance of an equivalent liquefiable layer, on the extent of foundation permanent deformation. The case history data showed that in general a shallow, thick and weak liquefiable layer near the surface results in significant settlement but a lack of data for buildings on non-liquefiable deposits and the additional complexities involved with real buildings and soil deposits, meant that the trends observed in the idealised numerical models could not identified in the field case history data set.

     

Speciation and Kinetics of Trihalomethane Formation in Drinking Water in Mexico

Water chlorination continues to be one of the most common water disinfection processes, especially in developing countries. When natural organic matter (NOM) is present, the process produces disinfection by-products (DBPs), some of them being trihalomethanes (THMs). This study determined the presence, speciation, and kinetics of THMs formation in the water supply for the northern area of the city of Toluca, Mexico. The results show that the concentrations of THMs are below the maximum allowable limits of 200 μg/L in accordance with NOM-127-SSA1-1994. Regarding THMs speciation, the presence of chloroform was more frequently observed in domestic water; furthermore, in one sample in which bromoform was present, it dominated over the chlorine species. Regarding the kinetics of THMs formation, a maximum concentration of THMs (THMs_Max) of 13.02 μg/L was obtained, and the time required to reach 50% THMs_Max ( t ₅₀) was 39.45 min.     

A grain-size correction for metal pollution indexes in river sediments

According to the List of Hazardous Substances of the Agency of the Toxic Substances and Disease Registry(ATSDR 2017),some metallic elements such as Pb or Cd are still considered as the most polluting elements in the world.These elements accumulate in sediments,and there are various methods available that differentiate lithogenic sources from anthropogenic sources.For that,the natural geochemical background is required,however,its definition is far from unanimous:it can be a global or local value,single or statistically estimated value,depending on the studies.Our study is focused on the Suba
e River in the state of Bahia,Northeastern Brazil,which was historically contaminated by lead metallurgy.The river sediments were sampled at 21 locations:one at the discharge point of the plant's rainwater basin,ten upstream,and ten downstream.The total contents of Fe,Ti,Mn,Pb,Zn,Cu,Cr,particle-size distribution,and organic matter were analyzed.The conventional geochemical indexes,i.e.,the pollution degree(mCd),pollution load index,and enrichment factor indicated contamination by Zn,Pb,Cr,and Cu.Then,a new enrichment factor is introduced,assuming that the sediments come from erosion of soils in the watershed.After obtaining the natural concentrations of metals in the clay,silt,and sand fractions of uncontaminated reference soils,we corrected the pollution indexes by calculating a new individual background in each sediment sample,according to its grain size distribution.This new approach provided more precise indexes in the assessment of sediment pollution,by highlighting higher contamination of Zn and Pb(around 50%)and at the same time the absence of Cr and Cu contamination,two metals not involved with the metallurgical activity.