Cu 2p absorption spectroscopy as a probe for the site occupancy of (ZnxCu1−x)WO4 solid solution

The solid solution sanmartinite (ZnWO₄)—cuproscheelite (CuWO₄) has been studied using Cu 2p X-ray absorption spectroscopy. While a single L₃ absorption peak is observed for CuWO₄, two distinct L₃ absorption peaks with a separation of ～0.8 eV are observed for the intermediate samples in the solid solution. The two peaks represent distinct Cu sites: one with all CuO₆ next nearest neighbours in the (Cu,Zn)O₆ chains, another having at least one ZnO₆ next nearest neighbour. Both sites show a linear increase in covalency as a function of increasing Cu-content. The relative intensities of the two absorption peaks is dependent upon the Cu-content and has been used to model the site occupancies. The results reveal that the local structural effects can be associated with a composition-dependent structural phase transition from P2/c (ZnWO₄) to P $\bar 1$ (CuWO₄). Deviations from a single-site model are explained in terms of the local environments, and evidence for site preferences and local clustering are explored.     

Fossil carotenoids and paleolimnology of meromictic Mahoney Lake,British Columbia,Canada

Vertical distribution of fossil carotenoids in a sediment core from meromictic Mahoney Lake was studied. Besides okenone and demethylated okenone, lutein and zeaxanthin and-carotene isomers were identified. No carotenoids typical for purple nonsulfur or green sulfur bacteria were detected. The ratio of zeaxanthin to lutein (above 1:1 in all samples) indicates a dominance of cyanobacteria over green algae in the phytoplankton assemblages of the past. Okenone, which is found exclusively in Chromatiaceae, was the dominating carotenoid in all sediment zones.The oldest sediment layers containing okenone were deposited 11 000 years ago. Between 9000 and 7000 and since 3000 years b.p., Chromatiaceae reached a considerable biomass in the lake. Vertical changes in okenone concentration were not related to changes of paleotemperatures. In contrast, okenone concentrations decreased during periods of volcanic ash input. During most of the lake history, however, mean okenone concentrations were positively correlated with sedimentation rates. This indicates that vertical changes of okenone concentration in the sediment reflect past changes of purple sulfur bacterial biomass in the lake.According to these results, the past limnology of Mahoney Lake resembled that of the present with a sulfide-containing monimolimnion and a well-developed population of okenone-bearing purple sulfur bacteria.     

Synthetic zeolites formed from expanded perlite: Type,formation conditions and properties

Summary The starting material used was expanded perlite with a grain size < 40 m (74.5 wt.% SiO₂; 12.5 wt.% Al₂O₃). This material is a waste product obtained during the production of expanded perlite. The experiments were carried out with KOH solutions, mixtures of KOH and NaOH solutions (1:1) as well as NaOH solutions in the concentration range 0.5 N to 6.0 N at temperatures of between 100° and 140°C and with reaction periods of 2 hours to 13 days in closed system. In the experiments with KOH containing solutions zeolite ZK-19 (phillipsite), W (merlinoite), G (chabazite) and F (edingtonite) formed. Without addition of aluminium high percentages of zeolite ZK-19 (80–100 wt.%) and zeolite W (90–100 wt.%) were obtained. The addition of aluminium rendered possibly the formation of 90 to 100 wt.% of zeolite G and 85 to 100 wt.% of zeolite F, respectively. In the experiments with NaOH solutions analcime, zeolite Na-Pc (gismondine), zeolite HS (sodalite hydrate) and zeolite A formed. High percentages of zeolite Na-Pc (90–100 wt.%), zeolite HS (up to 100 wt.%) and analcime (up to 100 wt.%) were synthesized without addition of aluminium. The formation of high percentages of zeolite A (95–100 wt.%), however, needs the addition of aluminium, NaCI and seed crystals. The temperature stability of the zeolites decreases in the following sequence: K-F > K-W K-ZK-19 (Na), K-W Na, K-F G_si-rich (Na), K-ZK-19 >> Na-Pc G_si-poor. Zeolite A has a very good temperature stability up to temperatures of } 550 °C similar to that of zeolite K-W. At higher temperatures, however, its stability is very poor. The NH₄ ⁺-exchange capacities (meq/g) of the different zeolites amount to the following values: ZK-19:2.8 - 3.2; W:3.0 - 3.2; G:2.3 - 3.6; A:3.1 - 3.2; Na-Pc:3.5 - 3.6; F : 3.9 - 4.8.

---

Zeolithsynthese aus Blähperlit—Art, Bildungsbedingungen und Eigenschaften

Zusammenfassung Ausgangsmaterial der experimentellen Untersuchungen war Blähperlit mit einer Korngröße < 40 ,m (74,5 Gew.-% SiO₂; 12,5 Gew.-% Al₂O₃). Dieses Material ist ein Abfallprodukt, das bei der Produktion von Blähperlit anfällt. Die Experimente wurden mit KOH-Lösungen, Lösungsgemischen aus KOH und NaOH (1:1) sowie mit NaOH-Losungen im Konzentrationsbereich 0,5 n-6,0 n bei Temperaturen von 100° – 140°C und über Reaktionszeiten von 2 Stunden bis zu 13 Tagen im geschlossenen System durchgeführt. In den Experimenten mit KOH-hältigen Lösungen bildeten sich die Zeolithe ZK-19 (Phillipsit), W (Merlinoit), G (Chabasit) und F (Edingtonit). Hohe Prozentgehalte an Zeolith ZK-19 (80 – 100 Gew.-%) und Zeolith W (90–100 Gew.-%) entstehen nur ohne Zugabe von Aluminium. Die Bildung von 90–100 Gew.-% Zeolith G bzw. 85–100 Gew. % Zeolith F ist dagegen durch die Zugabe von Aluminium möglich. In den Experimenten mit NaOH-Lösungen bildeten sich die Zeolithe Analcim, Na-Pc (Gismondin), HS (Sodalithhydrat) und Zeolith A. Hohe Prozentanteile an Zeolith Na-Pc (90–100 Gew.-%), HS (bis zu 100 Gew. %) und Analcim (bis zu 100 Gew.-%) wurden ohne Aluminium-Zugabe synthetisiert. Die Bildung von hohen Gehalten an Zeolith A (95–100 Gew. %) ist jedoch nur unter Zugabe von Aluminium, NaCl und Kristallkeimen möglich.Die Temperaturbeständigkeit der Zeolithe nimmt in der folgenden Reihenfolge ab: K-F > K-W - K-ZK-19 (Na), K-W Na, K-F G_si-reich (Na), K-ZK-19 >> Na-Pc G_si-am. Zeolith A weist bis zu Temperaturen von etwa 550°C eine gute Temperaturbeständigkeit auf, die in etwa der von Zeolith K-W entspricht. Bei höheren Temperaturen ist die Beständigkeit jedoch sehr gering.Die NH⁴⁺-Austauschkapazitäten (mÄqu/g) der verschiedenen Zeolithe erreichen folgende Werte: ZK-19:2,8 - 3,2; W:3,0 - 3,2; G:2,3 - 3,6; A:3,1 - 3,2; Na-Pc:3,5 -3,6; F:3,9 - 4,8.

---

---

With 2 Figures     

Die Rheingrabenrandverwerfung im Wattkopftunnel bei Ettlingen (Nordschwarzwald)

The Wattkopftunnel, near Ettlingen (Nordschwarzwald), drives through the eastern margin of the Rheingraben. The tunnel passes cenozoic and mesozoic sediments. Early quarternary and tertiary beds are situated west of the main thrust of the Rheingraben. Fossil record indicates upper Oligocene age (Chatt) for parts of the tertiary sediments. At the eastern border of the Rheingraben, wedges of jurassic and middle triassic series are squeezed. East of the Rheingraben the tunnel drives in the lower triassic Bausandstein. The eastern margin of the Rheingraben was investigated in detail during tunneling. Faults of the Rheingraben margin are distributed in an 130 meter wide fault zone in the tunnel. Total stratigraphic separation by the normal faults reaches more than 2 000 meters. The cenozoic sequence suffered synsedimentary to early diagenetic deformation, while the mesozoic series are characterized by ruptural deformation. The fault- and joint system is directed in the rheinische Richtung (SSW-NNE). East of the Rheingraben a second direction occur, running parallel to the lower Albtal (W-E).

     

Palaeoclimatic studies in South Shetland Islands,Antarctica, based on numerous stratigraphic variables in lake sediments

The hitherto longest found lake sediment sequence on Byers Peninsula, Livingston Island, South Shetland Islands, was analysed with respect to lithology, chronology, diatoms, Pediastrum, pollen and spores, mosses, mineralogy, and sediment chemistry. During the ca. 5000 year long development the sediments were influenced by frequent tephra fall-outs. This volcanic impact played a major role in the lake's history during two periods, 4700–4600 and 2800–2500 BP, but was of importance during the lake's entire history with considerable influence on many of the palaeoenvironmentally significant indicators. The large and complex data set was analysed and zonated with different types of multivariate analysis. This resulted in a subdivision of the sequence into 8 time periods and 21 variables. Redundancy analysis (RDA) of this data set, both without and with the tephra periods, and with 4–6 of the variables as explanatory environmental variables, reveal that climatic/environmental signals are detectable. The palaeoclimatic picture that emerged out of the tephra noise suggests that the first 100 years were characterized by mild, humid conditions. This was followed by a less mild and humid climate until ca. 4000 BP when a gradual warming seems to have started, coupled with increased humidity. These mild and humid conditions seem to have reached an optimum slightly after 3000 BP. At ca. 2500 BP a distinct climatic deterioration occurred with colder and drier conditions and long seasons with ice cover. This arid, cold phase probably reached its optimum conditions at ca. 1500 BP, when slightly warmer conditions might have prevailed for a while. Except for the modern sample with rather mild climate, the last 1400 years seem to have been fairly arid and cold, and the effects of the frequent volcanic activity during this period is only vaguely seen in the records.     

High-resolution sequence stratigraphy of the Lower Triassic ‘Buntsandstein’ in the Netherlands and northwestern Germany

Detailed log correlations of the largely fluvio-lacustrine Lower Triassic Buntsandstein (Late Permian-Early Anisian), carried out on 80 wells in the Dutch onshore and offshore areas, can be linked to northwest-German high-resolution sequence stratigraphy. The correlations show that cyclic sedimentation occurred in large parts of the basin. Seven 1st-order sequences are recognised, namely the Main Claystone, Rogenstein, Volpriehausen, Detfurth, Hardegsen, Solling and Lower Röt Sequences. They are overlain by the lower part of the Upper Röt–Lower Muschelkalk Sequence. Distinct sequence boundaries have been identified at the bases of four sequences: Volpriehausen, Detfurth, Solling and Upper Röt. The higher-order sequences consist of fining-upwards cycles with a thickness of up to tens of metres. The sequences are laterally persistent and have a characteristic expression on gamma-ray and sonic logs. In the Lower Buntsandstein, they display a uniform character throughout most of the area, with only minor differences in thickness or lithology. NNE-oriented lows and swells were formed during deposition of the Volpriehausen, Detfurth and Hardegsen Sequences. Uplift prior to the deposition of the Solling Sequence caused deep erosion on the swells in the basin and minor erosion in the lows. The high-resolution sequences probably represent alternating, relatively wet and dry climatic periods, with a periodicity of about 100 000 years. An analysis of the sequences suggests that their reduced thickness on the swells is mainly the effect of erosion. This is supported by analyses of the accumulation patterns and rates.     

A climate change simulation starting from 1935

Due to restrictions in the available computing resources and a lack of suitable observational data, transient climate change experiments with global coupled ocean-atmosphere models have been started from an initial state at equilibrium with the present day forcing. The historical development of greenhouse gas forcing from the onset of industrialization until the present has therefore been neglected. Studies with simplified models have shown that this cold start error leads to a serious underestimation of the anthropogenic global warming. In the present study, a 150-year integration has been carried out with a global coupled ocean-atmosphere model starting from the greenhouse gas concentration observed in 1935, i.e., at an early time of industrialization. The model was forced with observed greenhouse gas concentrations up to 1985, and with the equivalent C0₂ concentrations stipulated in Scenario A (Business as Usual) of the Intergovernmental Panel on Climate Change from 1985 to 2085. The early starting date alleviates some of the cold start problems. The global mean near surface temperature change in 2085 is about 0.3 K (ca. 10%) higher in the early industrialization experiment than in an integration with the same model and identical Scenario A greenhouse gas forcing, but with a start date in 1985. Comparisons between the experiments with early and late start dates show considerable differences in the amplitude of the regional climate change patterns, particularly for sea level. The early industrialization experiment can be used to obtain a first estimate of the detection time for a greenhouse-gas-induced near-surface temperature signal. Detection time estimates are obtained using globally and zonally averaged data from the experiment and a long control run, as well as principal component time series describing the evolution of the dominant signal and noise modes. The latter approach yields the earliest detection time (in the decade 1990–2000) for the time-evolving near-surface temperature signal. For global-mean temperatures or for temperatures averaged between 45°N and 45°S, the signal detection times are in the decades 2015–2025 and 2005–2015, respectively. The reduction of the cold start error in the early industrialization experiment makes it possible to separate the near-surface temperature signal from the noise about one decade earlier than in the experiment starting in 1985. We stress that these detection times are only valid in the context of the coupled model's internally-generated natural variability, which possibly underestimates low frequency fluctuations and does not incorporate the variance associated with changes in external forcing factors, such as anthropogenic sulfate aerosols, solar variability or volcanic dust.     

Analysis of COMPTEL gamma-ray burst locations and spectra

In its first three years of operation, the COMPTEL instrument on theCompton Gamma-Ray Observatory has measured the locations (mean accuracy 1°) and spectra (0.75-30 MeV) of 18 gamma-ray bursts and continues to observe new events at a rate of 1/month. With good angular resolution and sensitivity at MeV energies, the growing COMPTEL burst catalog is an important new piece of evidence in the on-going GRB mystery. The COMPTEL burst locations are consistent with an isotropic distribution of sources, yet the spatial coincidence of two of the bursts indicates the possibility of repetition. The COMPTEL burst spectra are in most cases consistent with a single power law model with spectral index in the range 2–3. However, two bursts show evidence of a spectral break in the MeV range. Measurement of rapid variability at MeV energies in the stronger bursts provides evidence that either the sources are nearby (within the Galaxy) or the gamma-ray emission is relativistically beamed. We present an overview of analysis results obtained from the COMPTEL burst catalog concentrating on the search for burst repetition and the implications of highly variable MeV emission.     

Near-infrared imaging in H2 of molecular (CO) outflows from young stars

We have imaged several known molecular (CO) outflows in H₂ v=1-0 S(1) and wide-band K in order to identify the molecular shocks associated with the acceleration of ambient gas by outflows from young stars. We detected H₂ line emission in all the flows we observed: L 1157, VLA 1623, NGC 6334I, NGC 2264G, L 1641N and Haro 4-255. A comparison of the H₂ data with CO outflow maps strongly suggests that prompt entrainment near the head of a collimated jet probably is the dominant mechanism for producing the CO outflows in these sources.     

A plan for a new generation 2M-class telescope in Indonesia

One of the prime astrophysical interests of the Observatorium Bosscha is, and has always been, double star research: visual double star research with the double-60 cm Zeiss telescope (dedicated in 1928), and theoretical research of evolved massive spectroscopic binaries (since 1972). For one thing, this is the very reason that this IAU Colloquium No. 80, celebrating the 60th anniversary of the Observatorium Bosscha in Lembang, is devoted to binary astrophysics.Up to now, visual, photographic, and photometric tools have been used for binary research at the Observatorium Bosscha. An important, essential additional tool for binary research is spectrographic equipment, in order to measure radial velocities of binary components.Therefore, we suggest to make a plan for a new modern telescope, a reflector with a primary mirror of about 2 m in diameter and with a modern spectrograph/detector combination for radial velocity measurements.At a number of major astronomical observatories scientists have been considerating to erect new telescopes devoted primarily to radial velocity measurements. The reason for this is that at the end of this decade the parallax and proper motion measurements to be made by the ESA astrometric satellite Hipparcos will become available of more than 100 000 single stars and double stars. At that time there will be a compelling need for radial velocity measurements of all these stars to complement the parallax and proper motion measurements. With the combination of this data enormous progress will be made in double star research, and in the study of galactic dynamics, another topic of interest of the Observatorium Bosscha. If it could be realized to build such a dedicated radial velocity telescope in Indonesia, Indonesian astronomers could take a leading role in this field of research.Without going into technical details, we would like to emphasize here that such a new instrument should be a trueNew Generation Telescope, and that the Institut Teknologi Bandung should participate from the very beginning in its design, construction and assembling, and the subsequent servicing; ITB could participate in the field of optics, mechanics, and electronics. Modern astronomy offers tremendous challenges to technology, which are of great interest to technological institutes. The new telescope should be computer controlled, and the spectrograph should have a modern digital read-out (Reticon, IPCS, or CCD). The telescope should have one of those recently becoming availablethin mirrors, allowing more mechanical freedom. It could be a telescope with a siderostat which feeds the light into a fixed telescope, thus improving both the stability of the telescope and that of the spectrograph. In this way the staff and students of ITB, as well as the technical staff of the Observatorium Bosscha will be drawn into modern techniques of many varieties. And for ITB such an enterprise may even have a spin-off into other fields than astronomy.One aspect which is of great importance for the new telescope is the selection of its site. The present site of the Observatorium Bosscha in Lembang is a good one, but for a new modern telescope one wants to make sure that it is going to be located at the most ideal site.Therefore an Indonesian site-survey should be initiated promptly. Site survey equipment is available at many big observatories and could be borrowed. The site survey should extend over at least 4–5 years to monitor the meteorological and environmental situation at many sites.In the meantime the design and fund rainsing can be considered. Modern day astronomy depends on financial support from governments and inter-governmental organizations. Therefore it is urged that a proposal for a new telescope as indicated above clearly describes the advantages of such a new telescope both for astrophysical research in Indonesia, and for the introduction of new technologies in Indonesian technological institutes.The recently formed Steering Committee for Indonesian-Netherlands Astrophysics (INA) is willing to explore the possibilities for this plan. We hope that after investigating the interest of ITB in this matter, a proposal could be made before the end of this year.Paper presented at the Lembang-Bamberg IAU Colloquium No. 80 on Double Stars: Physical Properties and Generic Relations, held at Bandung, Indonesia 3–7 June, 1983.