An optimized sequential extraction scheme for molybdenum association in environmental samples

By comparing three sequential extraction procedures, a new optimized extraction scheme for the molybdenum association in environmental samples was proposed. Five operational steps were described as exchangeable (KH₂PO₄ + K₂HPO₄: including water-soluble), associated with organic matter (NaOH), Fe–Mn oxides and/or carbonates (HCl), sulfides (H₂O₂) and residue (HNO₃ + HF + H₂O₂). An optimized extraction scheme was compared with Tessier’s procedure and the Commission of European Communities Bureau of Reference (BCR) was applied to black shales. Results showed Tessier’s procedure gave the lowest concentration values for exchangeable molybdenum and the highest values for the residual molybdenum, which could not present the efficiency of the extraction reagents. BCR’s procedure showed the highest values in oxidizable molybdenum and presented four fractions of molybdenum, which did not demonstrate the fractions of molybdenum in the black shales in detail. The optimized extraction scheme demonstrated a certain improvement on extraction efficiency over Tessier’s procedure for the lowest residual molybdenum, and revealed more featured fraction information of molybdenum in black shales than BCR’s. Therefore, after a comparison with other two extraction procedures, the optimized extraction scheme proved suitable for the molybdenum in black shales and it also showed an accurate determination of the molybdenum in the fractions and source of bioavailable Mo.     

Ra’s Abdah of the north Eastern Desert of Egypt: the role of granitic dykes in the formation of radioactive mineralization,evidenced by zircon morphology and chemistry

Syenogranitic dykes in the north of Egypt’s Eastern Desert are of geological and economic interest because of the presence of magmatic and supergene enrichment of radioactive mineralization. Zircon crystal morphology within the syenogranitic dykes allows precise definition of sub-alkaline series granites and crystallized at mean temperature of about 637 °C. The growth pattern of the zircons suggest magmatic and hydrothermal origins of radioactive mineralization. Hydrothermal processes are responsible for the formation of significant zircon overgrowth; high U-zircon margins might have occurred contemporaneously with the emplacement of syenogranitic dykes which show anomalous uranium (eU) and thorium (eTh) contents of up to 1386 and 7330 ppm, respectively. Zircon chemistry revealed a relative increase of Hf consistent with decreasing Zr content, suggesting the replacement of Zr by Hf during hydrothermal activity. Visible uranium mineralization is present and recognized by the presence of uranophane and autunite.     

Geochemistry of sedimentary rocks from Permian–Triassic boundary sections of Tethys Himalaya: implications for paleo-weathering,provenance, and tectonic setting

The geochemical characteristics of two sections—the Permian–Triassic boundary (PTB) Guryul Ravine section, Kashmir Valley, Jammu and Kashmir, India; and the Attargoo section, Spiti Valley, Himachal Pradesh, India—have been studied in the context of provenance, paleo-weathering, and plate tectonic setting. These sections represent the siliciclastic sedimentary sequence from the Tethys Himalaya. The PTB siliciclastic sedimentary sequence in these regions primarily consists of sandstones and shales with variable thickness. Present studied sandstones and shales of both sections had chemical index of alteration values between 65 and 74; such values reveal low-to-moderate degree of chemical weathering. The chemical index of weathering in studied samples ranged from 71 to 94, suggesting a minor K-metasomatism effect on these samples. Plagioclase index of alteration in studied sections ranged from 68 to 92, indicating a moderate degree of weathering of plagioclase feldspars. The provenance discriminant function diagram suggests that the detritus involved in the formation of present studied siliciclastic sedimentary rocks fall in quartzose sedimentary and felsic igneous provenances. These sediments were deposited in a passive continental margin plate tectonic setting according to their location on a Si₂O versus K₂O/Na₂O tectonic setting diagram.     

Nuclear field shift effects on stable isotope fractionation: a review

An anomalous isotope effect exists in many heavy element isotope systems (e.g., Sr, Gd, Zn, U). This effect used to be called the “odd–even isotope effect” because the odd mass number isotopes behave differently from the even mass number isotopes. This mass-independent isotope fractionation driving force, which originates from the difference in the ground-state electronic energies caused by differences in nuclear size and shape, is currently denoted as the nuclear field shift effect (NFSE). It is found that the NFSE can drive isotope fractionation of some heavy elements (e.g., Hg, Tl, U) to an astonishing degree, far more than the magnitude caused by the conventional mass-dependent effect (MDE). For light elements, the MDE is the dominant factor in isotope fractionation, while the NFSE is neglectable. Furthermore, the MDE and the NFSE both decrease as temperatures increase, though at different rates. The MDE decreases rapidly with a factor of 1/T², while the NFSE decreases slowly with a factor of 1/T. As a result, even at high temperatures, the NFSE is still significant for many heavy element isotope systems. In this review paper, we begin with an introduction of the basic concept of the NSFE, including its history and recent progress, and follow with the potential implications of the inclusion of the NFSE into the kinetic isotope fractionation effect (KIE) and heavy isotope geochronology.     

Fractionation characteristics of rare earth elements (REEs) linked with secondary Fe,Mn, and Al minerals in soils

Soil secondary minerals are important scavengers of rare earth elements (REEs) in soils and thus affect geochemical behavior and occurrence of REEs. The fractionation of REEs is a common geochemical phenomenon in soils but has received little attention, especially fractionation induced by secondary minerals. In this study, REEs (La to Lu and Y) associated with soil-abundant secondary minerals Fe-, Al-, and Mn-oxides in 196 soil samples were investigated to explore the fractionation and anomalies of REEs related to the minerals. The results show right-inclined chondrite-normalized REE patterns for La–Lu in soils subjected to total soil digestion and partial soil extraction. Light REEs (LREEs) enrichment features were negatively correlated with a Eu anomaly and positively correlated with a Ce anomaly. The fractionation between LREEs and heavy REEs (HREEs) was attributed to the high adsorption affinity of LREEs to secondary minerals and the preferred activation/leaching of HREEs. The substantial fractions of REEs in soils extracted by oxalate and Dithionite-Citrate-Bicarbonate buffer solutions were labile (10 %–30 %), which were similar to the mass fraction of Fe (10 %–20 %). Furthermore, Eu was found to be more mobile than the other REEs in the soils, whereas Ce was less mobile. These results add to our understanding of the distribution and geochemical behavior of REEs in soils, and also help to deduce the conditions of soil formation from REE fractionation.     

Study on the Global Carbon Assimilation System Based on Multisource Remote Sensing Data

The Paris agreement signed in April, 2016 aims to balance global anthropogenic carbon emissions and terrestrial carbon sinks by the middle of the 21^st century. To fulfill this goal, it is necessary to calculate carbon fluxes of different regions reliably. The global carbon assimilation system is an effective technique for achieving this goal. The Ministry of Science and Technology of China supports the project entitled as study on the global carbon assimilation system based on multisource remote sensing data through the national key research and development programs for global change and adaptation during the thirteen-five period. This project will develop synergic inversion techniques for retrieving key parameters of biological and atmospheric cycles and for assimilating multisource remote sensing and ground based data. Then, the high resolution global carbon assimilation system coupled with an ecological model will be constructed. This system is able to assimilate jointly multisource observation data and to optimize key model parameters, photosynthesis and respiration carbon fluxes of global terrestrial ecosystems, and anthropogenic carbon emission fluxes of key regions. This system will be used to study quantitatively the spatial and temporal patterns of carbon fluxes of global terrestrial ecosystems and anthropogenic carbon emission fluxes of key regions and to identify the mechanisms driving the global terrestrial carbon sinks and sources. The outputs of this study will be helpful for the fulfillment of the key research and development programs for global change and adaptation and provide valuable data and technical support for the decision-making in China.     

Coevolution between Terrestrial Ecosystem and Earth Environment

Coevolution between terrestrial ecosystem and Earth environment is a hot research topic in both biology and geology. Last progresses in these field are reported from following research subjects: evolution of jawed vertebrates(gnathostomata) from Silurian; occurrence of earliest forests from Devonian of Xinjiang; biodiversity of insects in amber from Cretaceous of Myanmar; Evolution of primates and geochemistry studies from Eocene/Oligocene; studies of Longdan fauna from Lingxia basin, Gansu Province of earlier Pleistocene and endemic cloven-breast fishes from Pliocene Tibet; the correlations thick-boned fish,Hsianwenia wui, and the aridification of the Qaidam Basin; monsoon climate and its impact on biodiversity; study on the flora from Mankang, Tibet of Miocene and its palaeoclimate; depositional environment and its impact on the preservation of fossils; contraction of high resolution Stratigraphic series by using data of paleomagnetism and mammal fossils.     

贵州矿产资源开发布局与优化探讨

在分析贵州矿产资源开发布局现状及存在问题的基础上,提出了贵州省矿产资源开发布局优化的原则,对开发区域布局和开发规划分区进行了探讨;调整了黔中、黔西、黔北、黔东四大矿产开发利用区域,划定禁止开采区、限制开采区、矿产资源重点矿区三类规划分区。     

点苍山-哀牢山杂岩带中北段嘎洒地区变沉积岩的成因矿物学与变质演化特征

点苍山-哀牢山变质杂岩带中北段嘎洒地区出露了多种典型的变沉积岩,其中夕线石榴黑云二长片麻岩和二云母片岩保存多期/多阶段矿物相转变特征,本文通过岩相学和矿物化学的综合分析,并结合传统矿物对温压计的估算结果,限定上述典型变沉积岩峰期角闪-麻粒岩相(M1)阶段、近等温减压-高温剪切变形阶段(M2)和晚期退变质(M3)阶段的矿物组合及变质温压条件。峰期角闪-麻粒岩相(M1)阶段的矿物组合为:石榴石(Grt)+板柱状夕线石(Sil1)+黑云母(Bt1)+钾长石(Kfs)+斜长石(Pl)+石英(Qtz)+钛铁矿(Ilm),变质温度压力条件为t=690~750℃,p=690~810 MPa;近等温减压-高温剪切变形阶段(M2)阶段,稳定矿物组合为:Grt+Sil2+Bt2+Kfs+Pl+Qtz+Ilm,黑云母在强烈走滑剪切作用下发生脱水熔融反应:2 Bt→Sil+6(Mg,Fe)O+K_2O+5 Qtz+2 H_2O,石榴石、黑云母和夕线石等受到剪切变形影响而发生强烈定向,形成的温度压力条件为t=650~720℃,p=450~630 MPa;晚期退变质阶段(M_3)的稳定矿物组合为:Qtz+Bt+Ms+Pl,退变的温度压力条件为t=580~640℃,p=400~500MPa。其变质演化p-T轨迹样式具有近等温减压的顺时针型式,表明点苍山-哀牢山变质杂岩带曾经历了一次明显的俯冲-碰撞造山事件,峰期变质可达到角闪-麻粒岩相;在碰撞后的构造折返过程中,上述变质岩石发生强烈的高温剪切变形作用,并伴随着黑云母等含水矿物的脱水熔融。     

澜沧江杂岩带小黑江-上允地区蓝片岩的成因及变质演化

通过对澜沧江杂岩带小黑江-上允地区蓝片岩的岩相学、地球化学、成因矿物学以及相平衡模拟的综合研究,阐述蓝片岩的原岩以及变质演化过程。地球化学分析结果显示,蓝片岩具有一致的稀土元素配分模式,具弱Eu正或负异常,稀土元素和微量元素特征与OIB相似,其原岩可能为OIB型玄武岩。详细矿物学研究表明,本区蓝片岩记录了俯冲峰期蓝片岩相变质和峰期后绿片岩相变质两个变质阶段,其矿物组合分别为蓝闪石+钠长石+多硅白云母+绿泥石+绿帘石和蓝闪石+钠长石±阳起石+绿泥石+绿帘石。通过Na_2O-Ca O-Fe O-MgO-Al_2O_3-SiO_2-H_2O-O体系相平衡计算,得到两个阶段的压力范围分别约为0.95 GPa和0.40 GPa。