Performance of a base isolator with shape memory alloy bars

A new and innovative base isolation device is introduced in this paper based on extensive research carried out by the authors and their co-workers. A prototype of the device was built and experimentally tested on the shaking table. The new base isolation device consists of two disks, one vertical cylinder with an upper enlargement sustained by three horizontal cantilevers, and at least three inclined shape memory alloy (SMA) bars. The role of the SMA bars is to limit the relative motion between the base and the superstructure, to dissipate energy by their super-elastic constitutive law and to guarantee the re-centring of the device. To verify the expected performance, a prototype was built and tested under sinusoidal waves of displacement of increasing frequency with different amplitudes. It is shown that the main feature of the proposed base isolation device is that for cyclic loading, the super-elastic behavior of the alloy results in wide load-displacement loops, where a large amount of energy is dissipated.     

In‐Situ Sonication for Enhanced Recovery of Aquifer Microbial Communities

Sampling methods for characterization of microbial communities in aquifers should target both suspended and attached microorganisms (biofilms). We investigated the effectiveness and reproducibility of low‐frequency (200 Hz) sonication pulses on improving extraction efficiency and quality of microorganisms from a petroleum‐contaminated aquifer in Studen (Switzerland). Sonication pulses at different power levels (0.65, 0.9, and 1.1 kW) were applied to three different groundwater monitoring wells. Groundwater samples extracted after each pulse were compared with background groundwater samples for cell and adenosine tri‐phosphate concentration. Turbidity values were obtained to assess the release of sediment fines and associated microorganisms. The bacterial community in extracted groundwater samples was analyzed by terminal‐restriction‐fragment‐length polymorphism and compared with communities obtained from background groundwater samples and from sediment cores. Sonication enhanced the extraction efficiency up to 13‐fold, with most of the biomass being associated with the sediment fines extracted with groundwater. Consecutive pulses at constant power were decreasingly effective, while pulses with higher power yielded the best results both in terms of extraction efficiency and quality. Our results indicate that low‐frequency sonication may be a viable and cost‐effective tool to improve the extraction of microorganisms from aquifers, taking advantage of existing groundwater monitoring wells.     

Variations in the geomagnetic dipole moment during the Holocene and the past 50 kyr

All absolute paleointensity data published in peer-reviewed journals were recently compiled in the GEOMAGIA50 database. Based on the information in GEOMAGIA50, we reconstruct variations in the geomagnetic dipole moment over the past 50  kyr, with a focus on the Holocene period. A running-window approach is used to determine the axial dipole moment that provides the optimal least-squares fit to the paleointensity data, whereas associated error estimates are constrained using a bootstrap procedure. We subsequently compare the reconstruction from this study with previous reconstructions of the geomagnetic dipole moment, including those based on cosmogenic radionuclides (¹⁰Be and ¹⁴C). This comparison generally lends support to the axial dipole moments obtained in this study. Our reconstruction shows that the evolution of the dipole moment was highly dynamic, and the recently observed rates of change (5% per century) do not appear unique. We observe no apparent link between the occurrence of archeomagnetic jerks and changes in the geomagnetic dipole moment, suggesting that archeomagnetic jerks most likely represent drastic changes in the orientation of the geomagnetic dipole axis or periods characterized by large secular variation of the non-dipole field. This study also shows that the Holocene geomagnetic dipole moment was high compared to that of the preceding  40  kyr, and that  4 · 10²²  Am² appears to represent a critical threshold below which geomagnetic excursions and reversals occur.     

The thermal stability of sideronatrite and its decomposition products in the system Na2O–Fe2O3–SO2–H2O

The thermal stability of sideronatrite, ideally Na₂Fe³⁺(SO₄)₂(OH)·3(H₂O), and its decomposition products were investigated by combining thermogravimetric and differential thermal analysis, in situ high-temperature X-ray powder diffraction (HT-XRPD) and Fourier transform infrared spectroscopy (HT-FTIR). The data show that for increasing temperature there are four main dehydration/transformation steps in sideronatrite: (a) between 30 and 40 °C sideronatrite transforms into metasideronatrite after the loss of two water molecules; both XRD and FTIR suggest that this transformation occurs via minor adjustments in the building block. (b) between 120 and 300 °C metasideronatrite transforms into metasideronatrite II, a still poorly characterized phase with possible orthorhombic symmetry, consequently to the loss of an additional water molecule; X-ray diffraction data suggest that metasideronatrite disappears from the assemblage above 175 °C. (c) between 315 and 415 °C metasideronatrite II transforms into the anhydrous Na₃Fe(SO₄)₃ compound. This step occurs via the loss of hydroxyl groups that involves the breakdown of the [Fe³⁺(SO₄)₂(OH)] _∞ ^2? chains and the formation of an intermediate transient amorphous phase precursor of Na₃Fe(SO₄)₃. (d) for T > 500 °C, the Na₃Fe(SO₄)₃ compound is replaced by the Na-sulfate thenardite, Na₂SO₄, plus Fe-oxides, according to the Na₃Fe³⁺(SO₄)₃ → 3/2 Na₂(SO₄) + 1/2 Fe₂O₃ + SO_x reaction products. The Na–Fe sulfate disappears around 540 °C. For higher temperatures, the Na-sulfates decomposes and only hematite survives in the final product. The understanding of the thermal behavior of minerals such as sideronatrite and related sulfates is important both from an environmental point of view, due to the presence of these phases in evaporitic deposits, soils and sediments including extraterrestrial occurrences, and from the technological point of view, due to the use of these materials in many industrial applications.     

POLARIX: a pathfinder mission of X-ray polarimetry

Since the birth of X-ray astronomy, spectral, spatial and timing observation improved dramatically, procuring a wealth of information on the majority of the classes of the celestial sources. Polarimetry, instead, remained basically unprobed. X-ray polarimetry promises to provide additional information procuring two new observable quantities, the degree and the angle of polarization. Polarization from celestial X-ray sources may derive from emission mechanisms themselves such as cyclotron, synchrotron and non-thermal bremsstrahlung, from scattering in aspheric accreting plasmas, such as disks, blobs and columns and from the presence of extreme magnetic field by means of vacuum polarization and birefringence. Matter in strong gravity fields and Quantum Gravity effects can be studied by X-ray polarimetry, too. POLARIX is a mission dedicated to X-ray polarimetry. It exploits the polarimetric response of a Gas Pixel Detector, combined with position sensitivity, that, at the focus of a telescope, results in a huge increase of sensitivity. The heart of the detector is an Application-Specific Integrated Circuit (ASIC) chip with 105,600 pixels each one containing a full complete electronic chain to image the track produced by the photoelectron. Three Gas Pixel Detectors are coupled with three X-ray optics which are the heritage of JET-X mission. A filter wheel hosting calibration sources unpolarized and polarized is dedicated to each detector for periodic on-ground and in-flight calibration. POLARIX will measure time resolved X-ray polarization with an angular resolution of about 20 arcsec in a field of view of 15 × 15 arcmin and with an energy resolution of 20% at 6 keV. The Minimum Detectable Polarization is 12% for a source having a flux of 1 mCrab and 10⁵ s of observing time. The satellite will be placed in an equatorial orbit of 505 km of altitude by a Vega launcher. The telemetry down-link station will be Malindi. The pointing of POLARIX satellite will be gyroless and it will perform a double pointing during the earth occultation of one source, so maximizing the scientific return. POLARIX data are for 75% open to the community while 25% + SVP (Science Verification Phase, 1 month of operation) is dedicated to a core program activity open to the contribution of associated scientists. The planned duration of the mission is one year plus three months of commissioning and SVP, suitable to perform most of the basic science within the reach of this instrument. A nice to have idea is to use the same existing mandrels to build two additional telescopes of iridium with carbon coating plus two more detectors. The effective area in this case would be almost doubled.     

Volcanic soil formation in Calabria (southern Italy): The Cecita Lake geosol in the late Quaternary geomorphological evolution of the Sila uplands

This paper focuses on the main morphological, physical, chemical and mineralogical features of an andic-like soil, widely outcropping in the Sila upland plateau of Calabria (southern Italy), and its potential role in tephrostratigraphy. A multidisciplinary and multiscale approach allowed identification of this soil as a “masked” distal archive of volcanic products, developed on granite rocks and sediments with a coeval pyroclastic input during pedogenesis. The study demonstrates that the contribution of volcanic parent materials can be successfully hypothesized and assessed even in the absence, limited extent or poor preservation of primary eruptive products. The soil has an Andisol-like appearance, despite laboratory data that do not match the entire suite of diagnostic criteria for the Andisol taxonomic order. Geomorphological, stratigraphic and pedologic results, coupled with tephrostratigraphic and radiometric data, concur to suggest a Late Pleistocene(?) to Holocene age of the Andisol-like soil. In particular, the rhyolitic chemical composition of small-sized glass fragments (identified by SEM–EDS analyses) indicates soil genesis contributed by volcanic ash, probably sourced from Aeolian Arc explosive activity spanning the last 30 ka. Accordingly, the evidence of limited relict clay illuviation and the specific type of pedogenesis allowing the development of andic properties (in turn related to the neoformation of clay minerals from the weathering of volcanic glass) are consistent with a climatic shift from a seasonally-contrasted to a constantly humid pedoenvironment. This change can be ascribed to the Lateglacial(?) or Early–Middle Holocene to Late Holocene transition. Calibrated AMS ¹⁴C dates performed on charcoal fragments sampled from three representative soil profiles, provide Late Holocene ages (3136 ± 19, 343 ± 16 and 92 ± 24 yr BP), in accord with archaeological finds. On the basis of the consistent stratigraphic position, lateral continuity and wide extent, the soil can be considered a good pedostratigraphic marker in the Sila highlands and is informally defined as the “Cecita Lake geosol”. It supplies valuable time constraints for the underlying (occasionally overlying) deposits and/or soils. Moreover, it allows regional-scale morphostratigraphic correlations and detailed reconstruction of Late Pleistocene–Holocene geomorphic events in Calabria, a very suitable region for distal tephra deposition in the central Mediterranean peri-volcanic area. The effects of high-energy volcanic eruptions are interfingered with or superimposed by other geomorphic processes and climatic or anthropogenic signals.     

The STAGES view of red spirals and dusty red galaxies: mass-dependent quenching of star formation in cluster infall

We investigate the properties of optically passive spirals and dusty red galaxies in the A901/2 cluster complex at redshift ∼0.17 using rest-frame near-ultraviolet–optical spectral energy distributions, 24-μm infrared data and Hubble Space Telescope morphologies from the STAGES data set. The cluster sample is based on COMBO-17 redshifts with an rms precision of  σ _cz ≈ 2000 km s⁻¹  . We find that 'dusty red galaxies' and 'optically passive spirals' in A901/2 are largely the same phenomenon, and that they form stars at a substantial rate, which is only four times lower than that in blue spirals at fixed mass. This star formation is more obscured than in blue galaxies and its optical signatures are weak. They appear predominantly in the stellar mass range of  log  M _*/M_⊙=[10, 11]  where they constitute over half of the star-forming galaxies in the cluster; they are thus a vital ingredient for understanding the overall picture of star formation quenching in clusters. We find that the mean specific star formation rate (SFR) of star-forming galaxies in the cluster is clearly lower than in the field, in contrast to the specific SFR properties of blue galaxies alone, which appear similar in cluster and field. Such a rich red spiral population is best explained if quenching is a slow process and morphological transformation is delayed even more. At  log  M _*/M_⊙ < 10  , such galaxies are rare, suggesting that their quenching is fast and accompanied by morphological change. We note that edge-on spirals play a minor role; despite being dust reddened they form only a small fraction of spirals independent of environment.     

Reionization and the Cosmic Dawn with the Square Kilometre Array

The Square Kilometre Array (SKA) will have a low frequency component (SKA-low) which has as one of its main science goals the study of the redshifted 21 cm line from the earliest phases of star and galaxy formation in the Universe. This 21 cm signal provides a new and unique window both on the time of the formation of the first stars and accreting black holes and the subsequent period of substantial ionization of the intergalactic medium. The signal will teach us fundamental new things about the earliest phases of structure formation, cosmology and even has the potential to lead to the discovery of new physical phenomena. Here we present a white paper with an overview of the science questions that SKA-low can address, how we plan to tackle these questions and what this implies for the basic design of the telescope.