Origin of the salt valleys in the Canyonlands section of the Colorado Plateau: Evaporite-dissolution collapse versus tectonic subsidence

The salt valleys over the axis of the salt-cored anticlines in the Paradox fold and fault belt (Canyonlands, Utah and Colorado) are created by subsidence of the anticline crests. Traditionally, the collapse of the anticlinal crests was attributed to dissolution of the salt walls (diapirs) forming the anticline cores. Recent studies based on scaled physical models and field observations propose that the salt valleys are a result of regional extension and that salt dissolution had only a minor influence in the development of the axial depressions. This paper presents several arguments and lines of evidence that refute the tectonic model and support the salt dissolution subsidence interpretation.The development of contractional structures in salt dissolution experiments led the advocates of the tectonic interpretation to reject the dissolution-induced subsidence explanation. However, these salt dissolution models do not reproduce the karstification of salt walls in a realistic way, since their analog involves removal of salt from the base of the diapirs during the experiments. Additionally, numerous field examples and laboratory models conducted by other authors indicate that brittle subsidence in karst settings is commonly controlled by subvertical gravity faults.Field evidence against the regional extension model includes (1) a thick cap rock at the top of the salt walls, (2) the concentration of subsidence deformation structures along the crest of the anticlines (salt walls), (3) deformational structures not consistent with the proposed NNE extension, like crestal synforms and NE–SW grabens, (4) dissolution-induced subsidence structures controlled by ring faulting, revealing deep-seated dissolution, (5) large blocks foundered several hundred meters into the salt wall, (6) evidence of recent and active dissolution subsidence, and (7) the aseismic nature of the recently active collapse faults. Although underground salt dissolution seems to be the main cause for the generation of the salt valleys, this phenomenon may have been favored by regional extension tectonics that enhance the circulation of groundwater and salt dissolution.     

A constrained 2D gravity model of the Sebastián Vizcaíno Basin, Baja California Sur, Mexico

The subsurface geometry of the Sebastián Vizcaíno Basin is obtained from the 2D inversion of gravity data, constrained by a density-versus-depth relationship derived from an oil exploration deep hole. The basin accumulated a thick pile of marine sediments that evolved in the fore-arc region of the compressive margin prevalent along western North America during Mesozoic and Tertiary times. Our interpretation indicates that the sedimentary infill in the Sebastián Vizcaíno Basin reaches a maximum thickness of about 4 km at the centre of a relatively symmetric basin. At the location of the Suaro-1 hole, the depth to the basement derived from this work agrees with the drilled interface between calcareous and volcaniclastic members of the Alisitos Formation. A sensitivity analysis strongly suggests that the assumed density function leads to a nearly unique solution of the inverse problem.     

Potential toxicity of resuspended particulate matter and sediments: Environmental samples from the Bay of Banyuls-sur-Mer and Thermaikos Gulf

This contribution attempts to determine whether, and to what degree, environmental samples of resuspended particulate matter and sediments exert a toxicological impact. Further, an attempt is made also to screen the toxic level of potentially hazardous sites, based upon established sediment toxicity criteria. Therefore, a rapid, cost-effective and highly sensitive biotest (bioluminescence assay, based upon marine bacteria) has been applied on: biological fluid extracts; bottom sediments; and sediment trap samples. Samples were taken either from the Bay of Banyuls-sur-Mer (northwestern Mediterranean, France) or Thermaikos Gulf (northeastern Mediterranean, Greece). Biological fluid extracts and sediment trap samples corresponded to periods of resuspension events, or preceding and following such events.The results have revealed that the sampling strategy and biotest implemented in this study might be a useful tool for screening the toxicity of resuspended matter and sediments. Resuspension events appear to be able to exert an influence on the chemical forms of the micro-pollutants; thus on their bioavailability and toxicity. Nevertheless, based upon chemical analysis combined with the bioassay, the toxic level of the sediment samples could be determined, with the level at potentially hazardous sites being characterised.     

Comments on “Evidence for global runoff increase related to climate warming” by Labat et al.

We have examined the evidence presented by Labat et al. and found that (1) their claims for a 4% increase in global runoff arising from a 1 °C increase in air temperature and (2) that their article provides the “first experimental data-based evidence demonstrating the link between the global warming and the intensification of the global hydrological cycle” are not supported by the data presented. Our conclusions are based on the facts that (1) their discharge records exhibit non-climatic influences and trends, (2) their work cannot refute previous studies finding no relation between air temperature and runoff, (3) their conclusions cannot explain relations before 1925, and (4) the statistical significance of their results hinges on a single data point that exerts undue influence on the slope of the regression line. We argue that Labat et al. have not provided sufficient evidence to support their claim for having detected increases in global runoff resulting from climate warming.     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.     

Short‐term intertidal bar mobility on a ridge‐and‐runnel beach,Merlimont, northern France

Digital elevation models and topographic pro?les of a beach with intertidal bar and trough (ridge‐and‐runnel) morphology in Merlimont, northern France, were analysed in order to assess patterns of cross‐shore and longshore intertidal bar mobility. The beach exhibited a pronounced dual bar–trough system that showed cross‐shore stationarity. The bars and troughs were, however, characterized by signi?cant longshore advection of sand under the in?uence of suspension by waves and transport by strong tide‐ and wind‐driven longshore currents. Pro?le changes were due in part to the longshore migration of medium‐sized bedforms. The potential for cross‐shore bar migration appears to be mitigated by the large size of the two bars relative to incident wave energy, which is modulated by high vertical tidal excursion rates on this beach due to the large tidal range (mean spring tidal range = 8·3 m). Cross‐shore bar migration is also probably hindered by the well‐entrenched troughs which are maintained by channelled high‐energy intertidal ?ows generated by swash bores and by tidal discharge and drainage. The longshore migration of intertidal bars affecting Merlimont beach is embedded in a regional coastal sand transport pathway involving tidal and wind‐forced northward residual ?ows affecting the rectilinear northern French coast in the eastern English Channel. Copyright © 2004 John Wiley & Sons, Ltd.     

Dike intrusion associated with the 2000 eruption of Miyakejima Volcano, Japan

The model for the 2000 dike intrusion event between Kozushima and Miyakejima volcano, Japan, was reinvestigated. After the sudden earthquake swarm in Miyakejima volcano, a dike intrusion of large volume was detected by the nationwide GPS network (Geonet). The displacements detected with GPS stations over an area with a radius of about 200 km shows a distribution that is consistent with the dike source being located near Miyakejima volcano.The dike was intruded northwestwards between Miyakejima and the neighboring Kozushima volcano. We searched for the parameters in the models that reproduce the regional displacements due to dike intrusion between Miyakejima and Kozushiima islands. We tested three models, (1) the model with a single dike, (2) the model with a dike and a point dislocation source which represents a creep dislocation source and (3) the model with a dike and a deflation source which represents a magma reservoir. Though all three models can match the horizontal displacements near the source area, model 1 fails to reproduce the regional displacements in the central part of Japan. Both models 2 and 3 can reproduce the regional displacement for horizontal components. Model 3 produces slightly better results than model 2 for vertical components. The balance in the volume budget for models 2 and 3 is also consistent with the observations. These results show that we cannot distinguish between the two models using only GPS observation. As there is no direct evidence for such a large creep or ductile source (corresponds to M7 or more) as proposed in model 2 and the active seismic region migrated back and forth within the linear swarm region, the model with a dike and a deep magma source is preferable. For the deflation point source, we obtained a deflation volume of 1.5 km³ at the depth of 20 km below the dike. An additional ~0.95 km³ of volume loss through caldera collapse and edifice deflation took place at Miyakejima. We conclude that the magma that intruded the dike came in part from below Miyakejima and in part from below the sea floor between Miyakejima and Kozushima, perhaps from reservoirs at the Moho.Editorial responsibility: S Nakada, T Druitt