Regeneration of sand waves after dredging

Sand waves are large bed waves on the seabed, being a few metres high and lying hundreds of metres apart. In some cases, these sand waves occur in navigation channels. If these sand waves reduce the water depth to an unacceptable level and hinder navigation, they need to be dredged. It has been observed in the Bisanseto Channel in Japan that the sand waves tend to regain their shape after dredging. In this paper, we address modelling of this regeneration of sand waves, aiming to predict this process. For this purpose, we combine a very simple, yet effective, amplitude-evolution model based on the Landau equation, with measurements in the Bisanseto Channel. The model parameters are tuned to the measured data using a genetic algorithm, a stochastic optimization routine. The results are good. The tuned model accurately reproduces the measured growth of the sand waves. The differences between the measured weave heights and the model results are smaller than the measurement noise. Furthermore, the resulting parameters are surprisingly consistent, given the large variations in the sediment characteristics, the water depth and the flow field. This approach was tested on its predictive capacity using a synthetic test case. The model was tuned based on constructed predredging data and the amplitude evolution as measured for over 2 years. After tuning, the predictions were accurate for about 10 years. Thus, it is shown that the approach could be a useful tool in the optimization of dredging strategies in case of dredging of sand waves.     

The influence of salinity on the solubility of Zn and Cd sulphides in the Scheldt estuary

In the estuary of the river Scheldt, where an oxygen gradient exists in addition to the salinity gradient, redox processes will be of major importance for trace metal mobilisation. In this study, the influence of salinity and pH on the redox processes of dissolved Zn and Cd sulphides is investigated together with the effects on the ratio of the dissolved Zn and Cd concentrations. The speciation of these metals is calculated with the chemical equilibrium programme +. Zn sulphides are oxidised at lower oxygen concentrations than Cd sulphides, due to lower stability constants, causing a sudden increase or peak in the dissolved Zn/Cd ratio. The formation of dissolved Cd chloride complexes when oxidation occurs at high salinities (S=15) increases the mobility of Cd, causing a decrease in the Zn/Cd peak of the total dissolved concentrations. The peak is three to four times smaller at S=15 than when oxidation occurs at S=2. The simple model calculations compare very well with field data. The Scheldt estuary is suitable to illustrate these calculations. In the 1970s, the anoxic part of the estuary reached S=15–20, but since the early 1980s it has dropped to S=2–10. Historic data on metals in the estuary from 1978, 1987 and the 1990s were used to compare with the equilibrium calculations. The increase of the dissolved Zn/Cd peak at low salinity as a consequence, of the decreasing anoxic region is confirmed well by the data. The good agreement between model calculations and field data is a proof of the extreme importance of redox processes for the solubility of Zn and Cd sulphides in the estuary.     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

Generation of internal waves in the sea by local perturbations of wind and density flows on the surface

On the basis of a nonlinear model taking into account viscosity, density diffusion, and currents, we perform the numerical analysis of propagation of perturbations formed in the abyssal part of the Black Sea as a result of the action of tangential wind stresses or density flows in the form of a strip on the sea surface. It is shown that, in the course of time, in the region of the bottom slope, these perturbations generate a train of waves in the sea, which causes oscillations of the fields of density and currents. There are some differences between the generation of internal waves by the flows of density and the wind. Unlike the wind action, in the presence of flows of density in the upper layer in the region of the strip, the initial period of generation is characterized by the formation of intense perturbations without train structure. Translated by Peter V. Malyshev and Dmitry V. Malyshev     

Numerical investigation of the influence of various factors on the propagation and transformation of solitary waves in the sea

For various stratifications and different types of bottom patterns we study the transformations of solitary perturbations of density appearing in the depth of the sea. In the two-dimensional case, under the assumption that the average dynamic characteristics weakly vary in time as compared with the wave characteristics, we deduce the equations for mean currents and waves taking into account vertical and horizontal viscosity and the diffusion of density. Numerical examples show that the stratification, bottom topography, nonlinearity, mean currents, and dissipation strongly affect both the process of splitting of a solitary wave into wave trains and their amplitude and length. The wave currents exhibit the oscillatory (train-like) character. It is emphasized that, in the case of propagation of solitary perturbations of density with dissipation, it is also important to take into account the combined influence of nonlinearity, currents, bottom topography, and stratification. Translated by Peter V. Malyshev and Dmitry V. Malyshev     

Phytoremediation of small-scale oil spills in fresh marsh environments: a mesocosm simulation

Research was conducted to assess the impact of oiling on fresh-marsh plant communities and to test the efficacy of techniques that may be used to enhance the bioremediation of crude oil spills in these environments while minimizing secondary anthropogenic impacts. To emulate field conditions, a mesocosm facility was used that houses 120 mesocosm vessels, each of 200-1 capacity. A five-way factorial treatment arrangement was used that included two substrates (inorganic, organic), two nutrient regimes (fertilized, not fertilized), two aeration levels (substrate aeration, no aeration), three oiling concentrations (0-, 5-, 10-1 m(-2) of South Louisiana Sweet Crude oil), and four vascular plant species (Alternanthera philoxeroides, Panicum hemitomon, Phragmites australis, Sagittaria lancifolia, and an unplanted control). Under the 5- and 10-1 m(-2) oiling concentrations, S. lancifolia displayed a short-term response of increased productivity, whereas P. hemitomon had the highest biomass production and photosynthetic rates at the end of the 18-month experiment. Overall plant growth and productivity, as well as oil degradation, were significantly higher in the inorganic substrate, indicating that biodegradation of oil spills in organic substrates may require a longer time period. Time-released fertilizer also stimulated plant productivity and resulted in higher soil respiratory quotients, suggestive of greater microbial activity, particularly in aerated mesocosms. The amount of oil remaining after 18 months was lowest in aerated and fertilized mesocosms containing either P. hemitomon or S. lancifolia and a substrate of low organic matter content.     

Generation of geostrophic vortices caused by displacements of a part of the bottom of a basin

Within the framework of the general linear statement of the problem, we determine the conditions of generation of a geostrophic current in a layer of uniform rotating fluid for small displacements of the bottom of a basin. We deduce an equation relating the equilibrium shape of the surface of the fluid with residual deformations of the bottom and find its general solution. It is shown that the geostrophic current is generated only in the presence of residual deformations. We present numerical estimates of the intensity of the generated geostrophic formation for a model of motion of the bottom. The investigated mechanism of generation of geostrophic vortex fields is especially efficient in the shelf zone of the ocean. Translated by Peter V. Malyshev and Dmitry V. Malyshev