Modeling of coupled tide–wave–surge process in the Yellow Sea

A coupled wave–tide–surge model has been developed in this study in order to investigate the effect of the interactions among tides, storm surges, and wind waves. The coupled model is based on the synchronous dynamic coupling of a third-generation wave model, WAM cycle 4, and the two-dimensional tide–surge model. The surface stress, which is generated by interactions between wind and wave, is calculated by using the WAM model directly based on an analytical approximation of the results using the quasi-linear theory of wave generation. The changes in bottom friction are created by the interactions between waves and currents and calculated by using simplified bottom boundary layer model. In consequence, the combined wave–current-induced bottom velocity and effective bottom drag coefficient were increased in the shallow waters during the strong storm conditions.     

Numerical analysis of the transformation of tsunami waves in the south crimea shelf area

The paper analyses the transformation of tsunami-type solitary waves, propagating from the abyssal part of the Black Sea towards its shelf zone. The study is performed by solving numerically unidimensional non-linear equations for non-dispersive long waves, using the finite-difference slope and shelf, with the full wave reflection prescribed at a 10 m depth contour. The non-linearity of the process is shown to throughly impact the reflection of waves by the shore and the shape of the reflected wave. Tsunami wave heights have been seen to increase by several times in the Black sea shelf area. Translated by Vladimir A. Puchkin.     

A computer program for interpreting vertical magnetic anomalies of spheres and horizontal cylinders

Summary A common computer program for the interpretation of vertical magnetic anomalies of spheres and horizontal cylinders has been developed. The input consists of the observed anomalies noted against their distances measured from an arbitrary point in the profile and a code number for each model. The program is written so that the positions and magnitudes of the maximum and minimum anomalies are located and their ratios and signs are used to define the initial parameters of the model under consideration. The errors resulting from these approximate values are derived and are solved for the increments to be given to the initial values. The process is repeated until the sum of the squares of the errors is less than 0.25% of the sum of the squares of the observed anomalies. The method has been tested on various theoretical examples and the results justify the validity of the programme.     

High kinetic energy density jets in the Earth’s magnetosheath: A case study

We study several high kinetic energy density jets observed during a traversal of the dayside magnetosheath by the Cluster spacecraft on March 17, 2001, at various distances from the magnetopause, generally characterised by anomalously high values of the local magnetosonic Mach number. We concentrate on two jets observed just outside the magnetopause, the first almost parallel to the GSM x axis and the second directed northward-tailward along the nominal magnetopause surface. We present evidence that none of them can be ascribed to magnetic reconnection at the magnetopause and show that the magnetopause is severely deformed by the jets, so that its local normal forms an angle of 97° with the quiet time magnetopause normal. On these grounds, we suggest that the indentation of the magnetopause is caused by an anti-sunward jet ramming into the magnetopause slightly equatorward of the northern cusp and that the northward-tailward jet is the result of its reflection at the deformed magnetopause. Finally, we briefly discuss our results by comparing them with past studies of events which in some way recall the one analysed herein.     

Modeling of hydrodynamics and transport processes in the Dnieper–Bug Estuary

A numerical model of baroclinic circulation based on the use of a double sigma coordinate system is presented and its application to the simulation of flows and temperature and salinity fields in the Dnieper-Bug Estuary is described. The model reproduces the salinity and temperature fields surveyed in 1998. The results of simulations reveal the existence of a global influence of the relatively narrow and deep ship channel (through which Black-Sea waters can penetrate deep into the estuary) on the transport processes. Translated from Morskoi Gidrofizicheskii Zhurnal, No. 6, pp. 66–77, November–December, 2008.     

Tsunami Inundation Modeling and Mapping using ALTM- and CARTOSAT-Derived Coastal Topographic Data

Coastal topography is the principal variable that affects the movement of the tsunami wave on land. Therefore, land surface elevation data are critical to a tsunami model for computing extent of inundation. Elevation data from India's remote sensing satellite CARTOSAT-1 are available for the entire Indian coastline, while elevation data collected using Airborne Laser Terrain Mapper (ALTM) are only available for selected sections of the coastline. This study was carried out to evaluate the suitability of CARTOSAT-1 and ALTM elevation data sets in the tsunami inundation modeling. Two areas of the coastal Tamil Nadu that were severely affected during the December 2004 tsunami and surveyed extensively for mapping the extent of inundation were selected as the study areas. Elevation data sets from ALTM, CARTOSAT-1 and field measurement collected using Real-time Kinematic GPS (RTK-GPS) were compared for these areas. The accuracy of ALTM and CARTOSAT-1 data, the significance of interpolation methods and data used on model outputs were studied. The analysis clearly revealed that the elevation accuracy of CARTOSAT-1 data (+/?2m) was much lower than ALTM data (+/?0.6m). However, it was found that despite the differing elevation accuracy, both ALTM and CARTOSAT-1 can be used to produce tsunami inundation maps for open coasts with an accuracy of 185 m (2 grid cells) at 75% and 50% confidence level, respectively.     

Storm surge mitigation through vegetation canopies

The paper of Reid and Whitaker (1976) on the effects of a vegetation canopy on flow of water is re-examined. Their assumptions on the equality of various drag coefficients are replaced by more realistic calculations. A new method for calculating wind stress on water is presented for the case when the vegetation extends above the water surface.For the case of vanishingly small water depth, it is shown that the horizontal stress is approximately constant in the vertical. This results in a diagnostic relationship for the water current as a function of the wind stress and bottom roughness.A new expression for the vertically averaged frictional force per unit mass is derived on the assumption that the friction velocity varies linearly with height. The vertical rate of change of friction velocity depends on the mean water current, the wind stress, the bottom roughness, and the water depth. This work has a possible application in the mitigation of storm surges.     

Relationship of atmospheric ozone profiles to solar magnetic activity

The observed relationship between atmospheric vorticity variations and solar magnetic sector boundary passages is examined for a possible connection via ionization changes affecting ozone distributions. A superposed epoch analysis was performed on Umkehr distributions for 18 years from Arosa, Switzerland, with use of more than 500 solar sector boundary passages as keyday zero. No significant responses are observed in any Umkehr level or in total observed ozone amounts. Further analyses on shorter records for Belsk, Poland, and Hohenpeissenberg, West Germany, corroborate these results. Another analysis for Arosa with about 100 type IV solar flares as keyday zero also shows no definitive trend. It is concluded that ozone distribution changes cannot be the primary causative mechanism for vorticity variations.Journal Paper No. J-8838 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Project No. 1852.     

Chemistry of snow and lake water in Antarctic region

Surface snow and lake water samples were collected at different locations around Indian station at Antarctica, Maitri, during December 2004–March 2005 and December 2006–March 2007. Samples were analyzed for major chemical ions. It is found that average pH value of snow is 6.1. Average pH value of lake water with low chemical content is 6.2 and of lake water with high chemical content is 6.5. The Na⁺ and Cl^? are the most abundantly occurring ions at Antarctica. Considerable amount of SO ₄ ^2? is also found in the surface snow and the lake water which is attributed to the oxidation of DMS produced by marine phytoplankton. Neutralization of acidic components of snow is mainly done by NH ₄ ⁺ and Mg²⁺. The Mg²⁺, Ca²⁺ and K⁺ are nearly equally effective in neutralizing the acidic components in lake water. The NH ₄ ⁺ and SO ₄ ^2? occur over the Antarctica region mostly in the form of (NH₄)₂SO₄.     

Felsic tuff from Rutland Island — A pyroclastic flow deposit in Miocene-sediments of Andaman-Java subduction complex

The bedded felsic tuff exposed in Rutland Island, Andaman, consists of two facies: