Surfactants in the sea-surface microlayer and their contribution to atmospheric aerosols around coastal areas of the Malaysian peninsula

A study was done to determine the concentrations of surfactants on the sea-surface microlayer and in atmospheric aerosols in several coastal areas around the Malaysian peninsula. The concentrations of surfactants from the sea-surface microlayer (collected using rotation drum) and from aerosols (collected using HVS) were analyzed as methylene blue active substances and disulphine blue active substances through the colorimetric method using a UV-vis spectrophotometer. The results of this study showed that the average concentrations of surfactants in the sea-surface microlayer ranged between undetected and 0.36 ± 0.34 μmol L⁻¹ for MBAS and between 0.11 ± 0.02 and 0.21 ± 0.13 μmol L⁻¹ for DBAS. The contribution of surfactants from the sea-surface microlayer to the composition of surfactants in atmospheric aerosols appears to be very minimal and more dominant in fine mode aerosols.     

Petrogenesis of lamprophyre and associated diabase dykes in Wadi Mandar-Um Adawi area,South Sinai,Egypt

The mafic dykes in Wadi Mandar-Wadi Um Adawi area are as follows: (1) calc-alkaline lamprophyre (i.e., kersantite and spessartite), (2) diabase, and (3) alkaline lamprophyre (i.e., camptonite). The field relations reveal that the emplacement of calc-alkaline lamprophyres preceded the diabase dykes, while alkaline lamprophyres emplaced later than the diabase dykes. Calc-alkaline are basaltic andesite, basaltic trachyandesite to basalt, while the diabase dykes and alkaline lamprophyres are basaltic in composition. These dykes are characterized by metaluminous character. Calc-alkaline lamprophyres and diabase dykes show transitional affinity from calc-alkaline to alkaline, while the alkaline lamprophyres exhibit more strong alkaline character. The mafic dykes were crystallized under temperature 1100–1150 °C and pressure 3–5 kbars in a high oxygen fugacity conditions. Fe-Ti oxides in the dykes are represented by ilmenite and Ti-magnetite. The chemistry of the sulfides hosted in those mafic dykes suggests a magmatic-hydrothermal origin for these minerals. The geochemical behavior of high field strength elements and large ion lithophile elements in these dykes excludes the derivation of diabase or alkaline lamprophyre either by partial melting or fractional crystallization from calc-alkaline lamprophyre. The parental magmatic sources of the studied dykes were generated from crustal material with addition of mantle-derived melt during the post-collisional stage. The mafic dykes in Wadi Mandar-Wadi Um Adawi area were generated from different magmatic sources by partial melting and subsequent fractional crystallization. In addition, the crustal contamination/assimilation process has a prominent role in the magmatic evolution of diabase and alkaline lamprophyre dykes.     

Study of regional monsoonal effects on landslide hazard zonation in Cameron Highlands, Malaysia

In general, landslides in Malaysia mostly occurred during northeast and southwest periods, two monsoonal systems that bring heavy rain. As the consequence, most landslide occurrences were induced by rainfall. This paper reports the effect of monsoonal-related geospatial data in landslide hazard modeling in Cameron Highlands, Malaysia, using Geographic Information System (GIS). Land surface temperature (LST) data was selected as the monsoonal rainfall footprints on the land surface. Four LST maps were derived from Landsat 7 thermal band acquired at peaks of dry and rainy seasons in 2001. The landslide factors chosen from topography map were slope, slope aspect, curvature, elevation, land use, proximity to road, and river/lake; while from geology map were lithology and proximity to lineament. Landslide characteristics were extracted by crossing between the landslide sites of Cameron Highlands and landslide factors. Using which, the weighting system was derived. Each landslide factors were divided into five subcategories. The highest weight values were assigned to those having the highest number of landslide occurrences. Weighted overlay was used as GIS operator to generate landslide hazard maps. GIS analysis was performed in two modes: (1) static mode, using all factors except LST data; (2) dynamic mode, using all factors including multi-temporal LST data. The effect of addition of LST maps was evaluated. The final landslide hazard maps were divided into five categories: very high risk, high risk, moderate, low risk, and very low risk. From verification process using landslide map, the landslide model can predict back about 13–16% very high risk sites and 70–93% of very high risk and high risk combined together. It was observed however that inclusion of LST maps does not necessarily increase the accuracy of the landslide model to predict landslide sites.     

Assessment of contaminants in Dubai coastal region, United Arab Emirates

Coastal uses and other human activities have inevitably impinged on the Gulf environment; therefore, these regions require continuous monitoring. The investigated area covered the maximum fragments of Dubai coastal region in the Arabian Gulf. The determination of major oxides and trace metal concentrations in Dubai sediments revealed three heavily and moderately contaminated regions. One is in the far northeastern part at Al-Hamriya Sts 1–3 and contaminated by Fe, Cu, Pb, and Zn; the second is in the mid-northeastern part at Dry Docks and contaminated by Cu, Ni, Pb, and Zn; and finally, the third is in the near southwestern part at Dubal and contaminated by Fe, Mg, Cr, Ni, and Zn. Al-Hamriya St 3 represented the highest values of Cu, Pb, and Zn, whereas Dubal exhibited the maximum values of Fe, Mg, Ba, Cr, Mn, Ni, and V. The anthropogenic discharge and natural deposits are the main sources of contamination. In general, all trace and major elements showed the minimal levels at Jebel Ali Sanctuary (Sts 11, 12, 13) except for Sr and Ca, which showed their maximum values. The highest concentrations of Ca and Sr are mainly attributed to carbonate gravel sands and sands, which cover most stations. Each of V and Ni showed negative correlation with TPH, which may be indicated that the source of oil contamination in the region is not related to crude oil but mostly attributable to anthropogenic sources. The significant positive correlation, which was found between trace metals and TOC indicates that organic matter plays an important role in the accumulation of trace metals in case of Cu, Zn, and Pb.     

Role of γ-ray spectrometry in detecting potassic alteration associated with Um Ba’anib granitic gneiss and metasediments, G. Meatiq area, Central Eastern Desert, Egypt

The radiometric responses of the Gebel (G., which means mountain in Arabic) Meatiq area display the overall high radiation of the high grade metamorphic Um Ba’anib granite gneiss, metasediments, as well as Arieki adamellite rocks. Whereas, the low grade metamorphic ophiolitic nappes country reveal the lowest radiometric response. The eU, eTh, and K contents tend to increase with the youthfulness of the plutons with a maximum amounts in the more alkali varieties, e.g., Arieki adamellite (580 Ma), then the high grade metamorphic rocks of the younger Meatiqian orogeny (626?±?2 Ma). Also, these rocks reveal that the major radiometric anomaly with exposure rates ≈139 nGy/h, more than double of the global terrestrial values. While, the low grade metamorphic ophiolitic rocks reveal the lowest average exposure rates ≈46.8 nGy/h. The areas of high gamma ray values of F-parameter of Efimov (K × U/Th), ternary composite map, K map, K/eTh, and K/eU ratios maps are related to K enrichment conditions during formation (diagenesis) or deformation of the high grade metamorphic rocks and the Arieki adamellite intrusion. From the geochemical point of view, these areas are associated with rocks that are characterized by high-K calc-alkaline, calc-alkaline affinity, and enriched in REE.     

Geospatial analysis of land use driving force in coal mining area: case study in Ningdong,China

GeoJournal - Geospatial techniques such as remote sensing and Geographic Information System are very important for studying the dynamic process of land use. To analyze the land use change and...     

Contribution of remote sensing and GIS to analysis of the risk of flooding in the Zat basin (High Atlas-Morocco)

Natural Hazards - Despite the controversy regarding their use, school buildings are often assigned as emergency evacuation shelters, temporary accommodation and aid distribution hubs following...     

Response of Mollusk Assemblages to Environmental Conditions: A Case Study from the Burullus Lagoon,Egypt

The identified mollusks from the Burullus lagoon of Egypt (Eastern Mediterranean) are represented by four bivalve species and four gastropod species. Sources of heavy metals pollution in the Burullus lagoon include phosphate fertilizers, sewage and oil spills from fishing boats.The Cerastoderma glaucum species has a wide distribution in the central part of the studied area with satisfying criteria required for good bio-monitors of pollution. High concentrations of heavy metals are found in water, at the eastern side of the lagoon, while low concentrations were detected in the central and western sides of the lagoon. Pirenella conica constitutes the total gastropods assemblages, reflecting this species tolerance to the high concentration of heavy metals. Meanwhile, the total pelecypods in bottom lagoon sediments are completely absent in the eastern parts of the lagoon, which may be due to the sensitivity of pelecypods to the accumulation of heavy metals.     

Pollution vulnerability of the Quaternary aquifer near Cairo, Egypt, as indicated by isotopes and hydrochemistry

The present study was conducted to delineate the pollution vulnerability of the Quaternary aquifer in two areas, Imbaba and Shobra El-Khima, near Cairo, Egypt. Environmental isotopes combined with hydrochemistry were used for this purpose. The groundwater in the Imbaba area (average total dissolved solids about 900 mg/L; sodium/chloride, sulfate, and bicarbonate water types) is more mineralized than groundwater in the Shobra El-Khima area (average total dissolved solids 500 mg/L; calcium and sodium/bicarbonate water type). A high nitrate content and significant mineralization in the groundwater are probably due to contamination of recharge to the aquifer by irrigation drainage, deteriorated sewage networks, and septic tanks. The deuterium and oxygen-18 compositions of the groundwater are depleted compared to Nile River water, which is the main source of aquifer recharge. This less isotopically enriched water probably represents older Nile water recharge that flooded the region before construction of the Aswan High Dam in 1963, or it is a mixture of a young water and originally deposited paleowater that was in deeper horizons at a time of cooler and more humid climate. Intensive pumping has moved the paleowater higher in the aquifer. Groundwater in the Shobra El-Khima area has higher residence time, based on the tritium concentration, than groundwater in the Imbaba area. The percentage of the isotopically depleted water equals 75% in the Shobra El-Khima and 35% in Imbaba, and the thickness of the clay cap above the aquifer is 38 m in Shobra El-Khima and 20 m in Imbaba. These factors are indicative of the rate of recharge to the aquifer and were used to evaluate the pollution vulnerability in the two areas. Electronic Publication     

Biostratigraphy and seismic data analysis to detect the sequence stratigraphic depositional environment of the Miocene succession: Gulf of Suez (Egypt)

This work comprises a study of the sequence stratigraphy, seismic-facies analysis, biostratigraphy and depositional environments of the northern part of the Gulf of Suez, Egypt, using a set of 24 3D seismic profiles, composite logs and sonic logs from ten wells. The syn-rift formations in the studied ten wells are described lithologically and interpreted based on investigating two seismic profiles. Biostratigraphically, the Miocene fossils are identified to correlate the five planktonic foraminiferal biozones in the examined boreholes (RB-A1, RB-B1, RB-B3, EE85-2 and RB-C1). The sequence stratigraphic analysis suggests that the Miocene succession can be subdivided into two major third order depositional sequences (S1 and S2) separated by the three major sequence boundaries (DSB1, DSB2 and DSB3).