The thermal continuum in coronal loops: The influence of finite resistivity on the continuous spectrum

The normal mode spectrum for the linearized MHD equations is investigated for a cylindrical equilibrium. This spectrum is examined for zero perpendicular thermal conduction, with both zero and non-zero scalar resistivity. Particular attention is paid to the continuous branches of this spectrum, or continuous spectra. For zero resistivity there are three types of continuous spectra present, namely the Alfvén, slow, and thermal continua. It is shown that when dissipation due to resistivity is included, the slow and Alfvén continua are removed and that the thermal continuum is shifted to a different position (where the shift is independent of the exact value of resistivity). The old location of the thermal continuum is covered by a dense set of nearly singular discrete modes called a quasi-continuum. The quasi-continuum is investigated numerically, and the eigenfunctions are shown to have rapid spatial oscillating behaviour. These oscillations are confined to the most unstable part of the equilibrium based on the Field criterion, and may be the cause of fine structure in prominences.     

Using GPS multipath to measure soil moisture fluctuations: initial results

Measurements of soil moisture are important for studies of climate and weather forecasting, flood prediction, and aquifer recharge studies. Although soil moisture measurement networks exist, most are sparsely distributed and lack standardized instrumentation. Measurements of soil moisture from satellites have extremely large spatial footprints (40–60 km). A methodology is described here that uses existing networks of continuously-operating GPS receivers to measure soil moisture fluctuations. In this technique, incoming signals are reflected off and attenuated by the ground before reception by the GPS receiver. These multipath reflections directly affect signal-to-noise ratio (SNR) data routinely collected by GPS receivers, creating amplitude variations that are a function of ground reflectivity and therefore soil moisture content. After describing this technique, multipath reflection amplitudes at a GPS site in Tashkent, Uzbekistan are compared to estimates of soil moisture from the Noah land surface model. Although the GPS multipath amplitudes and the land surface model are uncalibrated, over the 70-day period studied, they both rise sharply following each rainfall event and slowly decrease over a period of ∼10 days.     

Carbonyl products of the gas phase reaction of ozone with 1,1-disubstituted alkenes

Carbonyl products have been identified and their formation yields measured in experiments involving the gas phase reaction of ozone with 1,1-disubstituted alkenes at ambient T and p=1 atm. of air. Sufficient cyclohexane was added to scavenge the hydroxyl radical in order to minimize OH-alkene and OH-carbonyl reactions. Formation yields (carbonyl formed/ozone reacted) of primary carbonyls were close to the value of 1.0 that is consistent with the mechanism: O₃+R₁R₂C=CH₂ (HCHO+R₁R₂COO)+(1–)(R₁COR₂+H₂COO) where formaldehyde and the ketone R₁ COR₂ are the primary carbonyls and R₁R₂COO and H₂COO are the corresponding biradicals. Measured values of were 0.58–0.82 and indicate modest preferential formation of formaldehyde and the disubstituted biradical as compared to the ketone and the biradical H₂COO. Carbonyls other than the primary carbonyls were identified. Their formation is discussed in terms of subsequent reactions of the disubstituted biradicals R₁R₂COO. Similarities and differences between disubstituted and monosubstituted biradicals are outlined.     

A Yohkoh search for “black-light flares”

Calculations which predict that a phenomenon analogous to stellar negative pre-flares could also exist on the Sun were published by Hénouxet al. (1990), and Aboudarhamet al., (1990), who showed that at the beginning of a solar white-light flare (WLF) event an electron beam can cause a transient darkening before the WLF emission starts, under certain conditions. They named this event a black light flare (BLF). Such a BLF event should appear as diffuse dark patches lasting for about 20 seconds preceding the WLF emission, which would coincide with intense and impulsive hard X-ray bursts. The BLF location would be at (or in the vicinity of) the forthcoming bright patches. Their predicted contrast depends on the position of the flare on the solar disc and on the wavelength band of the observation.TheYohkoh satellite provided white-light data from the aspect camera of the SXT instrument (Tsunetaet al., 1991), at 431 nm and with a typical image interval of 10–12 s. We have studied nine white-light flares observed with this instrument, with X-ray class larger than M6. We have found a few interesting episodes, but no unambiguous example of the predicted BLF event. This study, although the best survey to date, was not ideal from the observational point of view. We therefore encourage further searches. Successful observations of this phenomenon on the Sun would greatly strengthen our knowledge of the lower solar atmosphere and its effects on solar luminosity variations.     

WKB estimates for the onset of ideal MHD instabilities in solar coronal loops

A WKB approach, based on the method of Connor, Hastie, and Taylor (1979), is used to obtain simple estimates of the critical conditions for the onset of ideal MHD instabilities in line-tied solar coronal loops. The method is illustrated for the constant twist, Gold-Hoyle (1960) field, and the critical conditions are compared with previous and new numerical results. For the force-free case, the WKB estimate for the critical loop length reduces to . For the sufficiently non-force-free case the critical length can be expressed in the forml ₀ +l ₁/m. The results confirm the findings of De Bruyne and Hood (1992) that for force-free fields them = 1 mode is the first mode to become unstable but for the sufficiently strong non-force-free case this reverses with them → ∞ mode being excited first.     

Palomar prime-focus infrared camera (PFIRCAM)

In a joint effort between engineers and scientists at the Jet Propulsion Laboratory and the California Institute of Technology, a near-infrared (0.8–2.6 m) direct imaging system has been developed and integrated into the Caltech Palomar Observatory detector series. The camera system has been tested and operated in a science mode at the prime-focus (f/3.3) of the Hale 5-m Telescope. This paper outlines the system components and performance, including discussion of the detector linearity.     

A verification of some methods to determine the fluxes of momentum,sensible heat,and water vapour using standard deviation and structure parameter of scalar meteorological quantities

A set of micro-meteorological data collected over a horizontal, uniform terrain (the plain of La Crau, France) in June 1987 is analysed. Conditions were predominantly sunny and arid, while due to the Mistral the wind speed could exceed 10 m/s. Verification of several methods to evaluate surface fluxes of heat, momentum and water vapour from the standard deviation of temperature, wind and specific humidity is presented. Also, a similar approach using the structure parameter of temperature is considered. These methods are all based on Monin-Obukhov (M-O) similarity theory. It is found that the standard deviation of temperature, vertical and horizontal wind speed as well as the structure parameter for temperature behave according to M-O similarity. It is shown that the sensible heat flux and friction velocity can be determined from a fast response thermometer and a cup anemometer. Also, it appears that the analytic solution of the set of governing equations as derived by the first author yields good results. M-O theory does not appear to work for the standard deviation of specific humidity. This may be due to the relative importance of large eddies.     

On the pH-dependent formation constants of iron(III)-sulfur(IV) transient complexes

An experimental study is described of Fe(III)-S(IV) formation constants measured as a function of pH (1–3), ionic strength (0.2–0.5 M) and [Fe(III)] _T (2.5–5.0×10^–4 M) using a continuous-flow spectrophotometric technique to make observations 160 ms after mixing. Preliminary experiments using pulse-accelerated-flow (PAF) spectrophotometry to measure rate constants on a microsecond timescale are also described. The conditional formation constant at 25 °C can be modeled with the following equation: {ie307-1} where {ie307-2}K ₇ andK ₈ can be interpreted as intrinsic constants for the coordination of HSO ₃ ^– by FeOH²⁺ and Fe³⁺, respectively, but until further evidence is obtained they should be regarded as fitting constants. PAF spectrophotometry showed that the initial reaction of Fe(III) with S(IV) (pH 2.0) is characterized by a second-order rate constant of 4×10⁶ M^–1 s^–1 which is comparable to rate of reaction of FeOH²⁺ with SO ₄ ^2– . However, the PAF results should be regarded as preliminary since unexpected features in the initial data indicate that the reaction may be more complex than expected.