SCALES: a large‐scale assessment model of soil erosion hazard in Basse‐Normandie (northern‐western France)

The cartography of erosion risk is mainly based on the development of models, which evaluate in a qualitative and quantitative manner the physical reproduction of the erosion processes (CORINE, EHU, INRA). These models are mainly semi‐quantitative but can be physically based and spatially distributed (the Pan‐European Soil Erosion Risk Assessment, PESERA). They are characterized by their simplicity and their applicability potential at large temporal and spatial scales. In developing our model SCALES (Spatialisation d'éChelle fine de l'ALéa Erosion des Sols/large‐scale assessment and mapping model of soil erosion hazard), we had in mind several objectives: (1) to map soil erosion at a regional scale with the guarantee of a large accuracy on the local level, (2) to envisage an applicability of the model in European oceanic areas, (3) to focus the erosion hazard estimation on the level of source areas (on‐site erosion), which are the agricultural parcels, (4) to take into account the weight of the temporality of agricultural practices (land‐use concept). Because of these objectives, the nature of variables, which characterize the erosion factors and because of its structure, SCALES differs from other models. Tested in Basse‐Normandie (Calvados 5500 km²) SCALES reveals a strong predisposition of the study area to the soil erosion which should require to be expressed in a wet year. Apart from an internal validation, we tried an intermediate one by comparing our results with those from INRA and PESERA. It appeared that these models under estimate medium erosion levels and differ in the spatial localization of areas with the highest erosion risks. SCALES underlines here the limitations in the use of pedo‐transfer functions and the interpolation of input data with a low resolution. One must not forget however that these models are mainly focused on an interregional comparative approach. Therefore the comparison of SCALES data with those of the INRA and PESERA models cannot result on a convincing validation of our model. For the moment the validation is based on the opinion of local experts, who agree with the qualitative indications delivered by our cartography. An external validation of SCALES is foreseen, which will be based on a thorough inventory of erosion signals in areas with different hazard levels. Copyright © 2010 John Wiley & Sons, Ltd.     

Comparison of LiDAR waveform processing methods for very shallow water bathymetry using Raman,near‐infrared and green signals

Airborne light detection and ranging (LiDAR) bathymetry appears to be a useful technology for bed topography mapping of non‐navigable areas, offering high data density and a high acquisition rate. However, few studies have focused on continental waters, in particular, on very shallow waters (<2 m) where it is difficult to extract the surface and bottom positions that are typically mixed in the green LiDAR signal. This paper proposes two new processing methods for depth extraction based on the use of different LiDAR signals [green, near‐infrared (NIR), Raman] of the SHOALS‐1000T sensor. They have been tested on a very shallow coastal area (Golfe du Morbihan, France) as an analogy to very shallow rivers. The first method is based on a combination of mathematical and heuristic methods using the green and the NIR LiDAR signals to cross validate the information delivered by each signal. The second method extracts water depths from the Raman signal using statistical methods such as principal components analysis (PCA) and classification and regression tree (CART) analysis. The obtained results are then compared to the reference depths, and the performances of the different methods, as well as their advantages/disadvantages are evaluated. The green/NIR method supplies 42% more points compared to the operator process, with an equivalent mean error (?4·2 cm verusu ?4·5 cm) and a smaller standard deviation (25·3 cm verusu 33·5 cm). The Raman processing method provides very scattered results (standard deviation of 40·3 cm) with the lowest mean error (?3·1 cm) and 40% more points. The minimum detectable depth is also improved by the two presented methods, being around 1 m for the green/NIR approach and 0·5 m for the statistical approach, compared to 1·5 m for the data processed by the operator. Despite its ability to measure other parameters like water temperature, the Raman method needed a large amount of reference data to provide reliable depth measurements, as opposed to the green/NIR method. Copyright © 2010 John Wiley & Sons, Ltd.     

Re‐establishment of soil water repellency after destruction by intense burning in a Mediterranean heathland (SW Spain)

Soil water repellency has been conventionally considered as a fire‐induced effect, but an increasing number of studies have suggested that natural background repellency occurs in many soil types, and many of them have suggested that water repellency can be re‐established over time after being destroyed. An experimental fire was conducted to study changes of the soil surface during the first 18 months following intense burning. The main objectives of this paper are as follows: (1) to investigate in situ water repellency changes at three soil depths (0, 2 and 4 cm) immediately after burning; (2) to evaluate the medium‐term evolution of water repellency under field conditions; and (3) to outline the main hydrological consequences of these changes. Also, different water repellency tests (water drop penetration time, ethanol percentage test (EPT) and contact angle (CA) between water drops and the soil surface) were carried out for comparison purposes. Field experiments showed that soil water repellency was partly destroyed after intense burning. Changes were relatively strong at the soil surface, but diminished progressively with depth. Levels of water repellency were practically re‐established 18 months after burning. This suggests that water repellency in the studied area is not necessarily a consequence of fire, but can instead be a natural attribute. Finally, although limited in time, destruction of soil water repellency has important consequences for runoff flow generation and soil loss rates, and, indirectly, for water quality. Copyright © 2009 John Wiley & Sons, Ltd.     

ESR chronology of alluvial deposits and first human settlements of the Middle Loire Basin (Region Centre,France)

Since 1970, many prehistoric sites have been discovered in the alluvial terraces of several rivers of the Middle Loire River basin (France). During the last decade, the stepped-terraces systems of three of the Loire tributaries, the Creuse, the Cher and the Loir Rivers, were the focus of multidisciplinary studies, involving Quaternary geology, prehistory and geochronology. The geochronological data now available for these systems were mainly obtained by electron spin resonance (ESR) method applied to optically bleached fluvial quartz. These results provide a chronological framework for the evolution of fluvial systems and the human settlements of this area during Lower and Middle Pleistocene. Two phases of human settlement could be distinguished, around 1.1 Ma (Early Palaeolithic – Mode 1) and around 0.7 Ma ago (Acheulean – Mode II).     

Dynamic of Sea Water Interface using Hydrochemical Facies Evolution Diagram

This paper analyzes the results of a theoretical simulation of sea water intrusion and its dynamics. The assignment of hydrochemical facies identifies whether the aquifer is in the phase of sea water intrusion or freshening, indicating the status of the aquifer in terms of the advance or regression of the saline front. A new multi-rectangular diagram is proposed that aids interpretation of these important processes through the representation and evolution of hydrochemical facies (hydrochemical facies evolution diagram, HFE-D). As an example, the HEF-D is applied to an alluvial aquifer in the Vinaroz-Peñíscola Plain (Spain), where Ca-Cl facies characterize the sea water intrusion phase, while Na-MixHCO₃/MixSO₄ facies characterize a freshening stage.     

Evaluating MT3DMS for Heat Transport Simulation of Closed Geothermal Systems

Owing to the mathematical similarities between heat and mass transport, the multi-species transport model MT3DMS should be able to simulate heat transport if the effects of buoyancy and changes in viscosity are small. Although in several studies solute models have been successfully applied to simulate heat transport, these studies failed to provide any rigorous test of this approach. In the current study, we carefully evaluate simulations of a single borehole ground source heat pump (GSHP) system in three scenarios: a pure conduction situation, an intermediate case, and a convection-dominated case. Two evaluation approaches are employed: first, MT3DMS heat transport results are compared with analytical solutions. Second, simulations by MT3DMS, which is finite difference, are compared with those by the finite element code FEFLOW and the finite difference code SEAWAT. Both FEFLOW and SEAWAT are designed to simulate heat flow. For each comparison, the computed results are examined based on residual errors. MT3DMS and the analytical solutions compare satisfactorily. MT3DMS and SEAWAT results show very good agreement for all cases. MT3DMS and FEFLOW two-dimensional (2D) and three-dimensional (3D) results show good to very good agreement, except that in 3D there is somewhat deteriorated agreement close to the heat source where the difference in numerical methods is thought to influence the solution. The results suggest that MT3DMS can be successfully applied to simulate GSHP systems, and likely other systems with similar temperature ranges and gradients in saturated porous media.     

Ground motion characterization and seismic hazard assessment in Spain: context,problems and recent developments

This article points out some particular features conditioning seismic hazard assessments (SHA) in Spain, a region with low–moderate seismicity. Although sized earthquakes occurred in the past, as evidenced by historical documents and neotectonic studies, no large events occurred during the last decades. The absence of strong motion records corresponding to earthquakes with magnitude larger than 5.5 is an important obstacle for the development of ground motion models constrained by local data, with the consequent difficulty in SHA studies. In this paper, some recent developments aiming at providing solutions to these difficulties are presented. Specifically, a strong motion databank containing a massive collection of accelerograms and response spectra from different configurations source-path-site corresponding to earthquakes all over the world is introduced, together with software utilities for its management. A first application of this databank is the development of specific ground motion models for Spain and for the Mediterranean region that predict peak ground accelerations as a function of several definitions of magnitude, distance and soil class. The predictive power of these ground motion models is tested by contrasting their estimates with recently recorded ground motions. The comparison between our ground-motion models with others proposed in the literature for other areas reveals a regular overestimation of the expected ground motions at Spanish sites by the non-local models. Consequently, SHA studies based in external models may overestimate the predicted hazard at the Iberian sites. In the last part of the paper a method for checking whether the response spectra proposed in the Spanish Building Code (NCSE-02) are consistent with actual accelerometric data from recent low magnitude earthquakes is applied. The spectral shapes of the Spanish Building Code NCSE-02 are compared with the response spectral shapes deduced from the available accelerograms by normalising the response spectra with the recorded PGA. It is appreciated that the NCSE-02 spectral shapes are exceeded by a large number of actual spectral shapes for short periods (around 0.2 s), a result to be taken into account in further revisions of the NCSE-02 code. The issues tackled in this work constitute not only an improvement for ground-motion characterisation in Spain, but also provide guidelines of general interest for potential applications in other regions with similar seismicity.     

Inshore/offshore gradients of imposex and organotin contamination in Nassarius reticulatus (L.) along the Portuguese coast

Imposex and organotin (OT) tissue contamination of the netted whelk Nassarius reticulatus (L.) were assessed in the continental shelves around the main estuaries of the central coast of Portugal (Lisbon: Tagus estuary; Setúbal: Sado estuary) and the main coastal lagoon in the Southern of Portugal (Faro: Ria Formosa). Pollution levels were higher in areas of more intense boat traffic and shipyard activities and imposex showed a clear decreasing gradient from the estuaries to the offshore, in relation to a similar gradient of tissue contamination by tributyltin. Remarkably, imposex was extensively spread over the adjacent continental shelves of Tagus and Sado estuaries. The current work shows that TBT pollution is undoubtedly a matter of concern not only for the above estuaries where harbours are implanted but also for the adjacent continental shelves, regardless the massive dilution of contaminants that may occur in these deeper areas.