Studying Sun–Planet Connections Using the Heliophysics Integrated Observatory (HELIO)

The Heliophysics Integrated Observatory (HELIO) is a software infrastructure involving a collection of web services, heliospheric data sources (e.g., solar, planetary, etc.), and event catalogues – all of which are accessible through a unified front end. In this paper we use the HELIO infrastructure to perform three case studies based on solar events that propagate through the heliosphere. These include a coronal mass ejection that intersects both Earth and Mars, a solar energetic particle event that crosses the orbit of Earth, and a high-speed solar wind stream, produced by a coronal hole, that is observed in situ at Earth (L1). A ballistic propagation model is run as one of the HELIO services and used to model these events, predicting if they will interact with a spacecraft or planet and determining the associated time of arrival. The HELIO infrastructure streamlines the method used to perform these kinds of case study by centralising the process of searching for and visualising data, indicating interesting features on the solar disk, and finally connecting remotely observed solar features with those detected by in situ solar wind and energetic particle instruments. HELIO represents an important leap forward in European heliophysics infrastructure by bridging the boundaries of traditional scientific domains.     

High-resolution analysis of submarine lobes deposits: Seismic-scale outcrops of the Lauzanier area (SE Alps, France)

The Lauzanier area represents the northernmost extension of the Annot Sandstone series and contains deposits between 650 and 900 m-thick. This basin was active from upper Bartonian or lower Priabonian to early Rupelian. It is composed of two superposed units separated by a major unconformity. The sediment supply is due to channelled flows coming from the south. Flow processes include mass flow to turbidity currents. The size of the particles and the absence of fine-grained sediment suggest a transport over a short distance. The Lower Unit is made of coarse-grained tabular beds interpreted as non-channelled lobe deposits. The Upper Unit is made of massive conglomerates interpreted as the channelled part of lobes. These lobe deposits settle in a tectonically confined basin according to topographic compensation that occurs from bed scale to unit scale. The abrupt progradation between the lower and the upper unit seems related to a major tectonic uplift in the area. This uplift is also suggested by a change in the petrographic nature of the source and an abrupt coarsening of the transported clasts.This field example allows providing high resolution analysis for depositional sedimentary sequences of terminal lobe deposits in a coarse-grained turbidite system. The outcrop analysis shows the lateral evolution of deposits and the system progradation allows a longitudinal analysis of facies evolution by superposing on the same outcrops the channelled lobe system and the non-channelled lobe system. These results of high-resolution outcrop analysis can be extrapolated to results obtained on sedimentary lobes in recent deep-sea turbidite system that are either restricted to cores, or with a lesser resolution (seismic).     

Assessing the current state of the Gironde Estuary by mapping priority contaminant distribution and risk potential in surface sediment

Based on high spatial resolution monitoring, the first spatial distribution maps for the eight trace elements identified as priority contaminants in aquatic systems (i.e. As, Cd, Cr, Cu, Hg, Ni, Pb and Zn) in surface sediments of the Gironde Estuary (SW France) are presented. This large European fluvial–estuarine system is known for important historical multi-element (mainly Cd, Zn, Cu and Pb) pollution by former mining and mineral processing activation in the Riou-Mort watershed located 350 km upstream the estuary. As a consequence, oyster production in the estuary is prohibited, and Cd concentrations in oysters from the Marennes-Oléron area are close to consumption thresholds. Surface sediment samples were analysed for grain size, particulate organic C and trace element concentrations. Determination of trace elements was carried out by ICP-MS for As, Cd, Cr, Cu, Ni, Pb, Th and Zn, and by CV-AAS for Hg. Total and potentially released trace element stocks in the surface sediment were evaluated by using concentrations in the estuary and in selected sediment core. Assuming that sediment resuspension affects mainly the uppermost sediment layer, the total trace element stocks in the studied 0–10 cm depth range may represent the equivalent of one (Cd) to eight (As, Cr) times the annual fluvial trace element inputs into the estuary. Comparing total trace element concentrations in surface sediment with: (i) data on the regional geochemical baseline to evaluate the potentially remobilised fraction and (ii) the potentially bioavailable fraction aimed at establishing a first spatially resolved risk assessment of the trace element “cocktail” present in these sediments at the estuary scale. After correction for grain size effects by Th normalisation, potentially highly toxic metals such as Cd and Hg showed the highest enrichment factors. From ecotoxicological indices, areas were identified and quantified where trace element levels and mobility may bear a risk to benthic organisms. The GIS-based spatial distribution of ecotoxicological indices for the trace element “cocktail” suggests that ∼95% of the surface sediment are ‘Low–Medium’-priority zones, highlighting the need for further impact studies. The produced maps of trace element distributions and associated risk potentials are likely to be a useful tool to authorities in charge of sustainable estuarine management, e.g. for the optimisation of dredging activities or development of the estuarine infrastructure.     

Extraction of Nd isotopes from bulk deep sea sediments for paleoceanographic studies on Cenozoic time scales

Nd isotopes preserved in fossil fish teeth and ferromanganese crusts have become a common tool for tracking variations in water mass composition and circulation through time. Studies of Nd isotopes extracted from Pleistocene to Holocene bulk sediments using hydroxylamine hydrochloride (HH) solution yield high resolution records of Nd isotopes that can be interpreted in terms of deep water circulation, but concerns about diagenesis and potential contamination of the seawater signal limit application of this technique to geologically young samples.In this study we demonstrate that Nd extracted from the > 63 μm, decarbonated fraction of older Ocean Drilling Program (ODP) sediments using a 0.02 M HH solution produces Nd isotopic ratios that are within error of values from cleaned fossil fish teeth collected from the same samples, indicating that the HH-extractions are robust recorders of deep sea Nd isotopes. This excellent correlation was achieved for 94 paired fish teeth and HH-extraction samples ranging in age from the Miocene to Cretaceous, distributed throughout the north, tropical and south Atlantic, and composed of a range of lithologies including carbonate-rich oozes/chalks and black shales. The strong Nd signal recovered from Cretaceous anoxic black shale sequences is unlikely to be associated with ferromanganese oxide coatings, but may be derived from abundant phosphatic fish teeth and debris or organic matter in these samples.In contrast to the deep water Nd isotopic signal, Sr isotopes from HH-extractions are often offset from seawater values, suggesting that evaluation of Sr isotopes is a conservative test for the integrity of Nd isotopes in the HH fraction. However, rare earth elements (REE) from the HH-extractions and fish teeth produce distinctive middle REE bulge patterns that may prove useful for evaluating whether the Nd isotopic signal represents uncontaminated seawater. Alternatively, a few paired HH-extraction and cleaned fish teeth samples from each site of interest can be used to verify the seawater composition of the HH-extractions. The similarity between isotopic values for the HH-extraction and fish teeth illustrates that the extensive cleaning protocol applied to fish teeth samples is not necessary in typical, carbonate-rich, deep sea sediments.     

Evolution diagénétique dans la craie pélagique dolomitisée du crétacé supérieur du bassin de Paris (région de Provins, France)

Two deep scientific boreholes, named Poigny 701 and Sainte-Colombe 702, located in the Paris Basin near Provins (Seine-et-Marne, France), recovered a complete Upper Cretaceous chalk succession. A correlation between the boreholes lithostratigraphy, reflexion seismic profiles and diagenetic patterns shows that major velocity variations measured in the seismic reflection profiles correspond to dolomitized chalk intervals. Dolomitisations occurred during early and burial diagenesis. The understanding of these complex diagenetic events has an important economic consequence on the static correction of the chalk formation in the Paris Basin. Optimisation of petroleum prospecting below chalk cover is thus possible. The chalk series of the 701 and 702 boreholes range from the Cenomanian to the upper Campanian. In this succession, micrite has a primarily biogenic origin; it consists of pelagic organisms, indicative of warm seawater with values around 25°C. Several hiatuses occur in the 701 borehole. These hiatuses indicate the existence of particular hydrodynamic conditions. Deep-water channels were locally recognised in the Paris Basin as in Normandy and Picardy. In the 702 borehole, massive dolomitisation affected the upper meters of sediment below the sea floor. This early phase of massive dolomitisation was induced by slow circulation of a magnesium-rich seawater mass, along the seawater/sediment interface. Thus, this area was a zone of intense marine circulation between the North-West infralittoral and the South-West bathyal domains, across the London-Paris Basin. Magnesium-rich seawater had as origin the recrystallisation of the biogenic peri-plateform carbonates. During both dolomitisation and dissolution of the calcite matrix of the massive dolomite, the calcite had cemented chalk around the massive dolomite body. After deposition, the chalk series was progressively compacted and lithified by burial calcite cement. During the late Campanian-Maastrichtian, the burial compaction of the chalk and thermal gradient reached their maximum, as compressive stresses from the Pyrenean orogenesis affected the Paris Basin. At this time, compaction of the massive dolomite induced the expulsion of magnesian-rich fluids into the underlying already compacted chalk series. In 702 borehole, a diffuse dolomitisation then affected strongly underlying the chalk series. In 701 borehole, this diffuse dolomitisation affected slightly the lower half of the chalk series. Laterally, dolomitisation decreases gradually and affected a only smaller thickness of the chalk series, disappearing laterally. During the progressive emergence of the Paris Basin, from the Paleogene to the Quaternary, the chalk series were partially invaded by continental fresh water. Thus partial dedolomitisation affected the massive dolomite, whereas total dedolomitisation affected only the upper first meters of it.Manuscrit reçu le 20 juin 2003 Révision acceptée le 9 septembre 2004     

Two cation exchange models for direct and inverse modelling of solution major cation composition in equilibrium with illite surfaces

Na/K, Na/Ca and Na/Mg exchange isotherms were performed on the fine fraction (<2 μm) of Imt-2 illite samples at a total normality of about 0.005 mol/L in anionic chloride medium. The derived selectivity coefficients for Na/K, Na/Ca and Na/Mg were found to vary as a function of the exchanger composition and compared well with the data collected in the literature for similar experimental conditions. Two models were built to reproduce the data: the first was a multi(2)-site model with constant Gaines and Thomas selectivity coefficients; the second was a one-site model taking into account surface species activity coefficients. The results of the models were in rather good agreement with both our data and literature data. The multi-site model proved to be efficient in predicting the exchanger composition as a function of the Na/Ca/Mg/K concentrations in solution, whereas the one-site model proved to be a better approach to derive the Na/Ca/Mg/K concentrations in solution based on the knowledge of the exchanger composition and the total normality of the solution. The interest of this approach is illustrated by the need for major cation solute concentration predictions in compacted clay for the characterization of nuclear deep disposal host rock repositories.     

Gradual Deformation and Iterative Calibration of Sequential Stochastic Simulations

Based on the algorithm for gradual deformation of Gaussian stochastic models, we propose, in this paper, an extension of this method to gradually deforming realizations generated by sequential, not necessarily Gaussian, simulation. As in the Gaussian case, gradual deformation of a sequential simulation preserves spatial variability of the stochastic model and yields in general a regular objective function that can be minimized by an efficient optimization algorithm (e.g., a gradient-based algorithm). Furthermore, we discuss the local gradual deformation and the gradual deformation with respect to the structural parameters (mean, variance, and variogram range, etc.) of realizations generated by sequential simulation. Local gradual deformation may significantly improve calibration speed in the case where observations are scattered in different zones of a field. Gradual deformation with respect to structural parameters is necessary when these parameters cannot be inferred a priori and need to be determined using an inverse procedure. A synthetic example inspired from a real oil field is presented to illustrate different aspects of this approach. Results from this case study demonstrate the efficiency of the gradual deformation approach for constraining facies models generated by sequential indicator simulation. They also show the potential applicability of the proposed approach to complex real cases.     

Distribution of some heavy metals in the Gulf of Fos

Measurements of copper, lead, cadmium and zinc were determined using the differential pulse anodic stripping voltametry technique in a marine industrialized area, the Gulf of Fos, near Marseilles. Results show an important contamination of the whole area, with particularly high values near the coast. Comparing our results with those of the literature, we see that the Gulf of Fos is probably one of the most polluted areas in Europe.     

Cation exchanged Fe(II) and Sr compared to other divalent cations (Ca, Mg) in the bure Callovian–Oxfordian formation: Implications for porewater composition modelling

Iron and Sr bearing phases were thoroughly investigated by means of spectrometric and microscopic techniques in Callovian–Oxfordian (COX) samples originating from the ANDRA Underground Research Laboratory (URL) in Bure (France). Strontium was found to be essentially associated with celestite, whereas Fe was found to be distributed over a wide range of mineral phases. Iron was mainly present as Fe(II) in the studied samples (∼93% from Mössbauer results). Most of the Fe(II) was found to be in pyrite, sideroplesite/ankerite and clay minerals. Iron(III), if present, was associated with clay minerals (probably illite, illite-smectite mixed layer minerals and chlorite). No Fe(III) oxy(hydro)xide could be detected in the samples. Strontianite was not observed either. Based on these observations, it is likely that the COX porewater is in equilibrium with the following carbonate minerals, calcite, dolomite and ankerite/sideroplesite, but not with strontianite. It is shown that this equilibrium information can be combined with clay cation exchange composition information in order to give direct estimates or constraints on the solubility products of the carbonate minerals dolomite, siderite and strontianite. As a consequence, an experimental method was developed to retrieve the cation exchanged Fe(II) in very well preserved COX samples.