Embryo dune development drivers: beach morphology,growing season precipitation,and storms

For development of embryo dunes on the highly dynamic land–sea boundary, summer growth and the absence of winter erosion are essential. Other than that, however, we know little about the specific conditions that favour embryo dune development. This study explores the boundary conditions for early dune development to enable better predictions of natural dune expansion. Using a 30 year time series of aerial photographs of 33 sites along the Dutch coast, we assessed the influence of beach morphology (beach width and tidal range), meteorological conditions (storm characteristics, wind speed, growing season precipitation, and temperature), and sand nourishment on early dune development. We examined the presence and area of embryo dunes in relation to beach width and tidal range, and compared changes in embryo dune area to meteorological conditions and whether sand nourishment had been applied. We found that the presence and area of embryo dunes increased with increasing beach width. Over time, embryo dune area was negatively correlated with storm intensity and frequency. Embryo dune area was positively correlated with precipitation in the growing season and sand nourishment. Embryo dune area increased in periods of low storm frequency and in wet summers, and decreased in periods of high storm frequency or intensity. We conclude that beach morphology is highly influential in determining the potential for new dune development, and wide beaches enable development of larger embryo dune fields. Sand nourishment stimulates dune development by increasing beach width. Finally, weather conditions and non‐interrupted sequences of years without high‐intensity storms determine whether progressive dune development will take place. Copyright © 2017 John Wiley & Sons, Ltd.     

Spatial and temporal changes in dry-snow line altitude on the Antarctic Peninsula

Drastic changes were detected in glacial systems of the Antarctic Peninsula in the last decades. The observed phenomena comprise the disintegration of ice shelves, acceleration and thinning of glaciers, and retreat of glacier fronts. However, due to the lack of consistent systematic observations in particular of the higher parts of the glacial systems, it is difficult to predict further responses of the Antarctic Peninsula glaciers to climatic change. The present paper analyses spatial and temporal variations of changes in the dry-snow line altitude on the Antarctic Peninsula as extracted from a time series (1992–2005) of ERS-1/2 SAR and Envisat ASAR data. Upward changes in dry-snow line altitude were observed in general, and are attributed to extreme high-temperature events impacting the central plateaus of the Antarctic Peninsula and the increasing duration of warming periods. A mean decrease in dry-snow line altitude was detected on the west side of the peninsula and is identified as a response to recorded increase in precipitation and accumulation. These results validate the capability of SAR data for deriving superficial parameters of glaciers to be used as indicators of climatic changes in high-latitude regions where operational restrictions limit conventional meteorological observations.     

Mineral-scale Sr-isotope constraints on magma evolution and chamber dynamics in the Rum layered intrusion,Scotland

Sr isotopic zoning within single plagioclase crystals from rocks from Unit 9 of the Rum layered intrusion is used to infer events during crystal growth in a magma undergoing contamination. The ⁸⁷Sr/⁸⁶Sr diversity among minerals and between cores and rims of plagioclase crystals increases as the boundary between unit 9 and the overlying Unit 10 peridotite is approached. Models of near-solidus interaction of the cumulate with a fluid or melt, or large scale textural re-equilibration, cannot easily account for the systematic differences in ⁸⁷Sr/⁸⁶Sr between small crystals and the rims of larger crystals.We propose a simple interpretation in which crystal growth is concentrated along the cool margins of the reservoir. Crystals are subsequently advected to a site of accumulation at the base of the reservoir, probably by episodic plume-like dense downwellings allowing mixing of isotopically zoned and unzoned crystals.If the core-rim isotope variations are inherited from primary magmatic growth, then the small distances over which they are now preserved (1–2 mm) place constraints on the minimum cooling rate of the intrusion. Although the length scale of diffusive equilibration is influenced by a number of poorly-constrained variables (starting temperature, feldspar composition, temperature-time path) cooling was clearly very rapid with cooling to effective closure (~1,000 °C) within a few thousand years.Editorial responsibility: I. Parsons     

The fall and rise of metropolitan government in Copenhagen

In this paper it is argued that the re-establishment of a metropolitan government in the Greater Copenhagen Area in 2000 (Greater Copenhagen Authority) is not to be seen as a return to the kind of regional, coordinative authority (Greater Copenhagen Council) that was abolished in the Thatcherite climate of the 1980s. Throughout the 1980s and 1990s new forms of urban governance, entrepreneurialism and a higher national priority to the capital region were introduced, which changed the conditions under which the new metropolitan government is operating. This `contextualization' of the analysis of the two generations of metropolitan government points to the fact that typologies of metropolitan government, such as the one put forward by Sharpe (1995), often lacks analytical cogency. This revised version was published online in August 2006 with corrections to the Cover Date.     

The thermal boundary-layer interpretation of D″ and its role as a plume source

The “anomalous” layer in the lowermost mantle, identified as D″ in the notation of K.E. Bullen, appears in the PREM Earth model as a 150 km-thick zone in which the gradient of incompressibility with pressure, $\text{d}\text{K}\text{d}\text{P}$, is almost 1.6, instead of 3.2 as in the overlying mantle. Since PREM shows no accompanying change in density or density gradient, we identify D″ as a thermal boundary layer and not as a chemically distinct zone. The anomaly in $\text{d}\text{K}\text{d}\text{P}$ is related to the temperature gradient by the temperature dependence of K_s, for which we present a thermodynamic identity in terms of accessible quantities. This gives the numerical result (?K_s/?T)_P=?1.6×10⁷ Pa K^?1 for D″ material. The corresponding temperature increment over the D″ range is 840 K. Such a layer cannot be a static feature, but must be maintained by a downward motion of the lower mantle toward the core-mantle boundary with a strong horizontal flow near the base of D″. Assuming a core heat flux of 1.6 × 10¹² W, the downward speed is 0.07 mm y^?1 and the temperature profile in D″, scaled to match PREM data, is approximately exponential with a scale height of 73 km. The inferred thermal conductivity is 1.2 W m^?1 K^?1. Using these values we develop a new analytical model of D″ which is dynamically and thermally consistent. In this model, the lower-mantle material is heated and softened as it moves down into D″ where the strong temperature dependence of viscosity concentrates the horizontal flow in a layer ～ 12 km thick and similarly ensures its removal via narrow plumes.     

Dating of lower terrace sediments from the Middle Rhine area, Germany

Modern and known-age Pleistocene fluvial sediments were investigated by optical dating of quartz to test the suitability of the approach for dating deposits from the deeply incised Middle Rhine Valley. Samples from modern flood sediments revealed skewed distributions indicating different residual levels of equivalent dose (D_e) within the different aliquots. Nevertheless, a substantial number of aliquots from the modern deposits reflect D_e values close to zero. For the Pleistocene samples, optical ages are in general consistent with age control given by the presence of the Laacher See Tephra and radiocarbon dating. However, some samples overestimate the known age by a few thousand years when using the arithmetic mean. This is apparently explained by including aliquots in the determination of mean D_e where the optical signal was incompletely bleached at deposition. The most difficult issue in this context is identifying a suitable approach that can distinguish between the variability of D_e due to partial bleaching and microdosimetry. However, even when considering these limitations it appears that optical dating will by a quite suitable method to date Pleistocene sediments from such a complex fluvial environment, especially when focusing on a precision scale beyond a few thousand years.     

Measuring the accessibility of different household income groups to basic community services in upland Misamis Oriental,Northern Mindanao,Philippines

Improving household accessibility to basic community services can help reduce poverty in upland areas. In this study, spatial analysis with GIS was used to measure the accessibility of different household income groups to community services in the landlocked upland municipality Claveria in Northern Mindanao, the Philippines. Important community services were identified through villagers' participation in a matrix‐scoring activity. Travel information was derived from key informant interviews while the geographical coordinates of sample households and important services were collected using GPS receivers. The Flowmap GIS software (version 7.2) was used to compute accessibility to services along the road network by habal‐habal (two‐wheel motorcycle). Outcomes from the participatory data gathering activities revealed that agricultural, educational and health facilities, as well as government services are important to the community to achieve sustainable livelihoods. Because local people perceive accessibility in terms of monetary costs, rather than distance, road distance measurements were converted into fare costs. Results of the accessibility analysis show that higher‐income household groups generally incur lower mean one‐way travel costs to reach important community services than poorer households. However, almost all households spend more than the daily per capita poverty threshold for the province to reach basic community services. A scenario to improve accessibility to services in the study area was investigated to emphasize the potential of GIS‐based accessibility analysis in rural service planning.     

The hydrochemistry of a semi-arid pan basin case study: Sua Pan,Makgadikgadi, Botswana

This study presents results on the fluid and salt chemistry for the Makgadikgadi, a substantial continental basin in the semi-arid Kalahari. The aims of the study are to improve understanding of the hydrology of such a system and to identify the sources of the solutes and the controls on their cycling within pans. Sampling took place against the backdrop of unusually severe flooding as well as significant anthropogenic extraction of subsurface brines. This paper examines in particular the relationship between the chemistry of soil leachates, fresh stream water, salty lake water, surface salts and subsurface brines at Sua Pan, Botswana with the aim of improving the understanding of the system’s hydrology. Occasionally during the short wet season (December–March) surface water enters the saline environment and precipitates mostly calcite and halite, as well as dolomite and traces of other salts associated with the desiccation of the lake. The hypersaline subsurface brine (up to TDS 190,000 mg/L) is homogenous with minor variations due to pumping by BotAsh mine (Botswana Ash (Pty) Ltd.), which extracts 2400 m³ of brine/h from a depth of 38 m. Notable is the decrease in TDS as the pumping rate increases which may be indicative of subsurface recharge by less saline water. Isotope chemistry for Sr (⁸⁷Sr/⁸⁶Sr average 0.722087) and S (δ³⁴S average 34.35) suggests subsurface brines have been subject to a lithological contribution of undetermined origin. Recharge of the subsurface brine from surface water including the Nata River appears to be negligible.     

Calibration of cyclic constitutive models by oscillating functions

Most structures are subjected to more cyclic loads during their life time than static loads. These cyclic action could be a result of either natural or man-made activities and may lead to soil failure. In order to understand the response of the foundation and its interaction with these complex cyclic loadings, various researchers have over the years developed different constitutive models. Although a lot of research is being carried out on these relatively new models, little or no details exist in literature about the model-based identification of the cyclic constitutive parameters which to a large extent govern the quality of the model output. This could be attributed to the difficulties and complexities of the inverse modeling of such complex phenomena. A variety of optimisation strategies are available for the solution of the sum of least-squares problems as usually done in the field of model calibration. However, for the back analysis (calibration) of the soil response to oscillatory load functions, this article gives insight into the model calibration challenges and also puts forward a method for the inverse modeling of cyclic loaded foundation response such that high-quality solutions are obtained with minimum computational effort.