A numerical experiment on the sedimentation processes in the Yellow Sea and the East China Sea

Sedimentation processes of suspended matter supplied from the Huanghe (Yellow River) and the Changjiang are investigated with the use of a three-dimensional numerical model of the Yellow Sea and the East China Sea which includes the tidal current, residual flow and wind waves. Suspended matter supplied from the Huanghe mainly deposits in the Bohai Sea and that from the old river mouth of the Huanghe and from the Changjiang in the central part of the Yellow Sea or south of Cheju Island. The calculated results well reproduce the observed sedimentation pattern qualitatively except for the offshore area of the southeastern coast of China.     

Distribution of Phyllosoma Larvae (Crustacea: Decapoda: Palinuridae,Scyllaridae and Synaxidae) in the Western North Pacific

Phyllosoma larvae were identified and their distribution was examined, based on the larvae in ichthyoplankton samples collected in the Japanese Eel Expedition to the spawning area of A. japonica in the western North Pacific from August 30 to September 13, 1986 (Leg. 1), and from September 22 to 25, 1986 (Leg. 2), on board the R/V Hakuho-maru. Phyllosoma larvae belonged to 3 families (Scyllaridae, Palinuridae and Synaxidae) representing 6 genera and 14 species. A total of 336 palinurid and synaxid phyllosoma larvae were collected, of which 233 larvae (about 70%) were identical with P. longipes s. l, while a total of 362 scyllarid phyllosoma larvae were collected, of which 274 larvae (about 76%) were identical with S. cultrifer. Phyllosoma larvae of P. longipes s. l and S. cultrifer showed a similar distribution to each other. The larvae were abundant in the water close to Mariana Islands, although late stage examples were abundant in waters of Luzon and eastern Taiwan. Distributions of these larvae may be related intimately with the North Equatorial Current existing along 15°N. The North Equatorial Current approaches the eastern coast of the Philippines and then separates into two branches of northward and southward flows. The northward flow contributes to generating the Kuroshio Current while the southward flow goes to generate the Mindanao Current. Judging from distributions of phyllosoma larvae in the present study, it is assumed that the larvae of the above two species may have been released in Mariana Islands and transported westward from there through the North Equatorial Current. These larvae may then be transported to eastern Taiwanese waters.     

Effects of scattering and dust grain size on the temperature structure of protoplanetary discs: a three-layer approach

The temperature in the optically thick interior of protoplanetary discs is essential for the interpretation of millimetre observations of the discs, for the vertical structure of the discs, for models of the disc evolution and the planet formation, and for the chemistry in the discs. Since large icy grains have a large albedo even in the infrared, the effect of scattering of the diffuse radiation in the discs on the interior temperature should be examined. We have performed a series of numerical radiation transfer simulations, including isotropic scattering by grains with various typical sizes for the diffuse radiation as well as for the incident stellar radiation. We also have developed an analytic model including isotropic scattering to understand the physics concealed in the numerical results. With the analytic model, we have shown that the standard two-layer approach is valid only for grey opacity (i.e. grain size ≳10 μm) even without scattering. A three-layer interpretation is required for grain size ≲10 μm. When the grain size is 0.1–10 μm, the numerical simulations show that the isotropic scattering reduces the temperature of the disc interior. This reduction is nicely explained by the analytic three-layer model as a result of the energy loss by scatterings of the incident stellar radiation and of the warm diffuse radiation in the disc atmosphere. For grain size ≳10 μm (i.e. grey scattering), the numerical simulations show that the isotropic scattering does not affect the interior temperature. This is nicely explained by the analytic two-layer model; the energy loss by scattering in the disc atmosphere is exactly offset by the 'green-house effect' due to the scattering of the cold diffuse radiation in the interior.     

Degassing history and carbon cycle of the Earth: From an impact-induced steam atmosphere to the present atmosphere

The recent theoretical studies on the formation and evolution of the atmosphere and oceans of the Earth are reviewed. Impact degassing during accretion of the Earth would probably generate an impact-induced steam atmosphere on the proto-Earth. At the end of accretion, the steam atmosphere became unstable and condensed to form the proto-ocean with almost the present mass of ocean. The steam atmosphere would have thus evolved to the proto-CO₂ atmosphere during the earliest history of the Earth because CO in the proto-atmosphere may be photochemically converted to CO₂. However, CO₂ in the proto-atmosphere has decreased with time through the global carbon cycle which may have stabilized the terrestrial environment against an increase in the solar luminosity. The continental growth during Hadean and Archean would therefore have a significant influence on the carbon cycle and the surface temperature. It is also suggested that the continental growth is a necessary condition for the terrestrial environment to evolve to the present state. Both the impact degassing and the subsequent continuous degassing are suggested to have played a major role in the formation and evolution of the atmosphere and ocean. In particular, most of N₂ may have been produced by the impact degassing during accretion, and the contribution of the subsequent continuous degassing is at most 10% for N₂. As a consequence, after the CO₂ level decreased to less than 1 bar, the atmosphere may have been at about 1 bar and composed mainly of N₂ for most of the subsequent history of the Earth.     

Thermal history of iherzolite xenoliths—I. Petrology of iherzolite xenoliths from the ichinomegata crater,oga peninsula,northeast Japan

The thermal history of four spinel lherzolites (Lhz-13. Lhz-28, Lhz-29 and Lhz-53) from tuff breccia of the Ichinomegata crater, northeast Japan, has been studied in detail. Lhz-13 and Lhz-53 showed nearly perfect chemical homogeneity of the constituent minerals, and increase of Ca near the rim of olivine is the only disequilibrium evidence observed. In addition to the Ca zoning in olivine, Lhz-28 and Lhz-29 revealed compositional zoning in the Mg/Mg + Fe ratio and Ca content in ortho- and clinopyroxenes. Lhz-13 and Lhz-53 equilibrated at about 800°C in the upper mantle, based on Fe/Mg partitioning between olivine/spinel and olivine/clinopyroxene, and on the mutual solubility of Ca between olivine and pyroxenes. Lhz-28 and Lhz-29 also equilibrated originally at about 800°C, but were preheated at about 1000°C prior to their entrapment by the ascending host magma. The Fe/Mg partitioning between olivine /spinel and olivine/clinopyroxene reequilibrated during the preheating event: however, the Ca solubility did not reequilibrate. Olivine alone has rehomogenized with a high-Ca content but pyroxenes were compositionally zoned with Ca. The preheating event, indicated by the high-Ca content in the core of olivine, is recognized from about a half of the Ichinomegata Iherzolites (50 xenoliths were studied).The duration of heating during the transport of the xenolith by the magma (estimated from the width of the Ca zoning in the rim of olivine) ranges between several hours to a year depending on the rock specimen. From the requirement to reset olivine core compositions, the duration of the preheating event was estimated as greater than 1000 yr.     

Melting kinetics of a plagioclase feldspar

Partial melting experiments on plagioclase feldspar have been carried out to investigate textures and kinetics of the melting. A labradorite single crystal was heated at one atmosphere pressure and temperatures within its melting interval as a function of time. So called honeycomb, fingerprint, or sieve textures were produced except for the runs just below the liquidus. The melting was initiated by heterogeneous nucleation of melt at the surface and/or interior (cracks and possively dislocations) of the crystal. The pattern of the melt is dendritic with a few μm arm spacing. After the melt develops throughout the crystal, the volumes of melt and residual crystal become larger and smaller, respectively, without changing the arm spacings. The melt is homogeneous and has the approximate temperature dependent liquidus composition irrespective of the time. There are compositional gradients in the residual crystal after short periods of melting. The An content of the crystals increases with increasing time until it finally reaches equilibrium with the melt after several thousands minutes of heating. It is concluded that the enlargement of the melt, the main process of the melting, is controlled by diffusion in the crystal. The fact that partial melts have the composition of the equilibrium liquidus even from the first several minutes strongly suggests that the local equilibrium at the crystal-liquid interface is satisfied during the melting. Some of the honeycomb, fingerprint, and sieve textures found in xenoliths and phenocrysts of sodic plagioclase in volcanic rocks would be caused by heating events (such as magma mixing) during which temperatures of magmas were temporarily higher than the solidus of some of the minerals.     

Concentrations of Trace Elements in Carbonate Reference Materials Coral JCp-1 and Giant Clam JCt-1 by Inductively Coupled Plasma-Mass Spectrometry

Trace elements in the Geological Survey of Japan carbonate reference materials Coral JCp-1 and Giant Clam JCt-1 were determined by inductively coupled plasma-mass spectrometry after digestion with 2% v/v HNO₃. A standard addition method was adopted in this determination in order to neutralise the Ca matrix effect. In addition, Sc, Y, In and Bi were used as internal standards to control the matrix effect and correct instrumental drift. Of the eighteen elements measured in JCp-1, precisions for fourteen elements, including Cu, Cd and Ba, were better than 10% RSD and concentrations ranged from 0.002 μg g^-1 (Cs) to 8.02 μg g^-1 (Ba). The concentrations of measured trace elements in JCt-1, except for Cu, were lower than those in JCp-1. Precisions for all elements with concentrations higher than 0.04 μg g^-1 in JCt-1 were also better than 10% RSD and concentrations were found to be between 0.001 μg g^-1 (Cs) and 4.84 μg g^-1 (Ba). The concentrations of more than fifteen trace elements in the aragonite reference materials are reported here for the first time. Both reference materials are suitable for use in geochemical studies of environmental reconstruction based upon biogenic carbonate materials.     

Thermal equation of state of majorite with MORB composition

In situ synchrotron X-ray diffraction experiments were conducted using the SPEED-1500 multi-anvil press at SPring-8 on majoritic garnet synthesized from natural mid-ocean ridge basalt (MORB), whose chemical composition is close to the average of oceanic crust, at 19 GPa and 2200 K. Pressure-volume-temperature data were collected using a newly developed high-pressure cell assembly to 21 GPa and 1273 K. Data were fit to the high-temperature Birch-Murnaghan equation of state, with fixed values for the ambient cell volume (V₀ = 1574.14(4) Å³) and the pressure derivative of the isothermal bulk modulus (K^′T = 4). This yielded an isothermal bulk modulus of K_T0 = 173(1) GPa, a temperature derivative of the bulk modulus (∂K_T/∂T)_P = −0.022(5) GPa K⁻¹, and a volumetric coefficient of thermal expansivity α = a + bT with values of a = 2.0(3) × 10⁻⁵ K⁻¹ and b = 1.0(5) × 10⁻⁸ K⁻². The derived thermoelastic parameters are very similar to those of pyrope. The density of subducted oceanic crust compared to pyrolitic mantle at the conditions in Earth's transition zone (410-660 km depth) was calculated using these results and previously reported thermoelastic parameters for MORB and pyrolite mineral assembledges. These calculations show that oceanic crust is denser than pyrolitic mantle throughout the mantle transition zone along a normal geotherm, and the density difference is insensitive to temperature at the pressures in lower part of the transition zone.     

Experimental and analytical studies on earthquake resisting behaviour of confined concrete block masonry structures

To improve the seismic performance of masonry structures, confined masonry that improves the seismic resistance of masonry structures by the confining effect of surrounding bond beams and tie columns is constructed. This study investigated the earthquake resisting behaviour of confined masonry structures that are being studied and constructed in China. The structural system consists of unreinforced block masonry walls with surrounding reinforced concrete bond beams and tie columns. The characteristics of the structure include: (1) damage to blocks is reduced and brittle failure is avoided by the comparatively lower strength of the joint mortar than that of the blocks, (2) the masonry walls and surrounding reinforced concrete bond beams and tie columns are securely jointed by the shear keys of the tie columns. In this study, wall specimens made of concrete blocks were tested under a cyclic lateral load and simulated by a rigid body spring model that models non‐linear behaviour by rigid bodies and boundary springs. The results of studies outline the resisting mechanism, indicating that a rigid body spring model is considered appropriate for analysing this type of structure. Copyright © 2006 John Wiley & Sons, Ltd.