Characteristics of hydrothermal plumes from two vent fields on the Juan de Fuca Ridge, northeast Pacific Ocean

Deep CTD/transmissometer tows and water bottle sampling were used during 1985 to map the regional distribution of the neutrally-buoyant plumes emanating from each of two major vent fields on the Southern Symmetrical Segment (SSS) and Endeavour Segment (ES) of the Juan de Fuca Ridge. At both vent fields, emissions from point and diffuse hydrothermal sources coalesced into a single 200-m-thick plume elongated in the direction of current flow and with characteristic temperature anomalies of 0.02–0.05°C and light-attenuation anomalies of 0.01–0.08 m⁻¹ (10–80 μg/l above background). Temperature anomalies in the core of each plume were uniform as far downcurrent as the plumes were mapped (10–15 km). Downcurrent light-attenuation trends were non-uniform and differed between plumes, apparently because different vent fluid chemistries at each field cause significant differences in the settling characteristics of the hydrothermal precipitates. Vent fluids from the SSS are metal-dominated and mostly precipitate very fine-grained hydrous Fe-oxides that remain suspended in the plume. Vent fluids from the ES are sulfur-dominated and precipitate a high proportion of coarser-grained Fe-sulfides that rapidly settle from the plume. The integrated flux of each vent field was estimated from measurements of the advective transport of each plume. Heat flux was 1700 ± 1100 MW from the ES and 580 ± 351 MW from the SSS. Particle flux varied from 546 ± 312 g/s to 204 ± 116 g/s at the ES depending on distance from the vent field, and was 92 ± 48 g/s from the SSS.     

Lead in corals: reconstruction of historical industrial fluxes to the surface ocean

Twentieth century environmental lead chronologies for the western North Atlantic, Pacific, and Indian Oceans have been reconstructed from annually-banded scleractinian corals. Measurements of lattice-bound Pb in sequential coral bands reveal temporal changes in surface water Pb concentrations and Pb isotopic distributions. Perturbations are observable in all specimens studied, attesting to global augmentation of environmental Pb by industrialization.In the western North Atlantic, Pb perturbations have occurred in direct response to the American industrial revolution and the subsequent introduction and phasing-out of alkyl Pb additives in gasoline. Surface ocean conditions near Bermuda may be reliably reconstructed from the coral data via a lead distribution coefficient of 2.3 for the species,Diploria strigosa. Based on²¹⁰Pb measurements, a similar distribution coefficient may be characteristic of corals in general. Surface Pb concentrations in the pre-industrial Sargasso Sea were about 15–20 pM. Concentrations rose to near 90 pM by 1923 as a result of metals manufacture and fossil fuel combustion. Beginning in the late 1940's, increased utilization of leaded gasoline eventually led to a peak concentration of 240 pM in 1971, representing an approximate 15-fold increase over background. Surface ocean concentrations are presently declining rapidly (128 pM in 1984) as a result of curtailed alkyl Pb usage. Lead isotopic shifts parallel the concentration record indicating that characteristic industrial and alkyl Pb source signatures have not changed appreciably in time. Industrial releases recorded in the Florida Keys reflect a weaker source and evidence of recirculated Pb (5–6 years old) from the North Atlantic subtropical gyre. An inferred background concentration of 38 pM suggests influence of shelf and/or resuspended inputs of Pb to these coastal waters.In remote areas of the South Pacific and Indian Oceans, industrial signals are fainter and the corals studied much younger than their Atlantic counterparts. Contemporary Pb concentrations implied by coral measurements (assumingK_D = 2.3) are 40–50 pM for surface waters near Tutuila and Galapagos in the South Pacific, and 25–29 pM near Mauritius in the Indian Ocean. A single coral band from Fiji (1920 ± 5yr) implies a pre-industrial surface water concentration of 16–19 pM Pb for the South Pacific. In view of reported surface water measurements and the North Atlantic coral data, the Pacific coral extrapolations may be slightly high. This could be a result of small variations inK_D among different coral genera, or incorporation of diagenetic Pb by corals sampled in coastal environments.     

Tungsten in iron meteorites

Tungsten concentrations have been determined by instrumental neutron activation in 104 iron meteorites, and range from 0.07 to 5 μg/g. In individual groups, concentrations vary by factors of between 1.5 and 8, but there are negative W-Ni correlations in 8 groups: IAB, IC, IIAB, IID, IIE, IIIAB, IIICD, and IIIF. The lowest W concentrations are found in groups IAB and IIICD, which also have the smallest slopes on a W-Ni plot. Eighteen anomalous irons have W concentrations between 5 μg/g (Butler) and 0.11 μg/g (Rafrüti). The distribution of W in irons shows similarities to that of other refractory siderophilic elements (except Mo), but is closest to the distribution of Ru and Pt.Assuming that chemical trends in group IIIAB were produced by fractional crystallization, a value of 1.6 can be deduced for the distribution coefficient of W between solid and liquid metal, cf. 0.89 for Mo. Experimental evidence in support of these values is tenuous.     

Reports from the Smithsonian’s Global Volcanism Network,November 2008

Information included in this summary is based on more detailed reports published in the Bulletin of the Global Volcanism Network, vol. 33, no. 11, November 2008 (on the Internet at ). Edited by scientists at the Smithsonian, this bulletin includes reports provided by a worldwide network of correspondents. The reports contain the names and contact information for all sources. Please note that these reports are preliminary and subject to change as events are studied in more detail. The Global Volcanism Program welcomes further reports of current volcanism, seismic unrest, monitoring data, and field observations.     

Location and height of intertidal bars on macrotidal ridge and runnel beaches

Previous studies devoted to the morphology and hydrodynamics of ridge and runnel beaches highlight characteristics that deviate from those initially postulated by King and Williams (Geographical Journal, 1949, vol. 113, 70–85) and King (Beaches and Coasts, 1972, Edward Arnold). Disagreements on the morphodynamics of these macrotidal beaches include the position of the ridges relative to the mean neap and spring tide levels, the variation in the height of the ridges across the intertidal profile and, most importantly, whether the ridges are formed by swash or surf zone processes. The morphological characteristics of ridge and runnel beaches from three locations with varying wave, tidal and geomorphic settings were investigated to address these disagreements. Beach profiles from each site were analysed together with water‐level data collected from neighbouring ports. It was found that the ridges occur over the entire intertidal zone. On one site (north Lincolnshire, east England), the ridges are uniformly distributed over the intertidal beach, whereas on the two other sites (Blackpool beach, northwest England, and Leffrinckoucke beach, north France) there is some indication that the ridges appear to occur at preferential locations. Most significantly, the locations of the ridge crests were found to be unrelated to the positions on the intertidal profile where the water level is stationary for the longest time. It was further found that the highest ridges generally occur just above mid‐tide level where tidal non‐stationarity is greatest. These findings argue against the hypothesis that the ridges are formed by swash processes acting at stationary tide levels. It is tentatively suggested that the ridges are the result of a combination of swash and surf zone processes acting across the intertidal zone. Elucidation of the morphodynamic roles of these two types of processes, and other processes such as strong current flows in the runnels, requires further comprehensive field measurements complemented by numerical modelling. Copyright © 2001 John Wiley & Sons, Ltd.     

Variability in estimates of oil contamination in the intertidal zone of a gravel beach

Estimates of the surface cover of stranded oil on a gravel beach ranged between 25 and 51%. This variability is attributed primarily to wet weather conditions that altered the colour of the surface substrate, thus making identification of oil or oiled sediments difficult. Estimates and the observations from three surveys in wet weather ranged between 25 and 46%; whereas on a dry day the range from four surveys was only 42–51%. Within this small study area (7200 m²) the same observer provided estimates of the surface oil cover that ranged from 1800 to 3680 m². This wide variability for a small section of shoreline would probably be magnified during reconnaissance surveys where long sections of coast are surveyed to determine the degree of contamination. Surveys of beach contamination for cleanup decisions or for damage assessment should be conducted with regard to the environmental (weather) conditions and the degree of accuracy that is required from the survey.     

NMR Logging to Estimate Hydraulic Conductivity in Unconsolidated Aquifers

Nuclear magnetic resonance (NMR) logging provides a new means of estimating the hydraulic conductivity (K) of unconsolidated aquifers. The estimation of K from the measured NMR parameters can be performed using the Schlumberger‐Doll Research (SDR) equation, which is based on the Kozeny–Carman equation and initially developed for obtaining permeability from NMR logging in petroleum reservoirs. The SDR equation includes empirically determined constants. Decades of research for petroleum applications have resulted in standard values for these constants that can provide accurate estimates of permeability in consolidated formations. The question we asked: Can standard values for the constants be defined for hydrogeologic applications that would yield accurate estimates of K in unconsolidated aquifers? Working at 10 locations at three field sites in Kansas and Washington, USA, we acquired NMR and K data using direct‐push methods over a 10‐ to 20‐m depth interval in the shallow subsurface. Analysis of pairs of NMR and K data revealed that we could dramatically improve K estimates by replacing the standard petroleum constants with new constants, optimal for estimating K in the unconsolidated materials at the field sites. Most significant was the finding that there was little change in the SDR constants between sites. This suggests that we can define a new set of constants that can be used to obtain high resolution, cost‐effective estimates of K from NMR logging in unconsolidated aquifers. This significant result has the potential to change dramatically the approach to determining K for hydrogeologic applications.     

Fluvial seed dispersal of riparian trees: transport and depositional processes

Fluvial seed dispersal considers both the transport and deposition of seeds where channel geomorphic structures, hydrology and seed dispersal traits contribute to transport times and depositional locations. This study examines the influence of stream flow patterns on fluvial seed dispersal of buoyant white alder (Alnus rhombifolia) seeds by applying a one‐dimensional transport model. Conceptually, the model separates the stream into two components: (i) the main channel where the seeds are transported downstream; and (ii) the transient storage zone where seeds are temporarily detained or deposited on the river bank. Transport processes are characterized by an advection–dispersion equation which is coupled to a transient storage model using an exponential decay term. The model parameters: longitudinal dispersion (D_L), exchange coefficient (α), main channel area (A) and storage zone (A_s) are estimated based on field experiments conducted in a confined, bedrock‐gravel bed river with pool‐riffle morphology located in coastal northern California. The riparian zone is inhabited by Alnus rhombifolia that disperse buoyant seeds in mid‐spring coinciding with the end of the wet, Mediterranean season. Artificial seeds, with similar traits of buoyancy and density to alder seeds, were used to quantify transport times and depositional locations. Preferential deposition resulted in stream reaches with larger A_s, high A_s/A ratios, and faster exchange coefficients corresponding to divergent stream flow (back‐eddies, re‐circulating flow, flow expansions) caused by geomorphic structures such as the ends of bar/riffle features and bends in the stream. The results demonstrate the importance of transient storage for seed transport and depositional processes. Morphological features that increase a channel's complexity create complex flow structures that detain seeds and provide a greater opportunity for deposition to occur. The model provides a simplification of river hydraulics to represent dispersal dynamics and lends itself to further understanding of hydrochory processes and associated population structure. Copyright © 2015 John Wiley & Sons, Ltd.