Quaternary evolution of the Gulf of İzmit (NW Turkey): a sedimentary basin under control of the North Anatolian Fault Zone

The Quaternary evolution of the Gulf of İzmit, situated on the tectonically active North Anatolian Fault Zone (NAFZ), was investigated using seismic reflection, paleontologic, and sediment textural data. On the basis of seismic stratigraphic and sedimentologic-paleontologic interpretations, four depositional units were distinguished within the Plio-Quaternary sequence of the Gulf of İzmit. According to these data, Plio-Quaternary deposits supplied from the northern terrestrial area started to accumulate during a progradational phase, in a south-facing half-graben. A coarse-grained sedimentary unit prograding into the gulf from the south since 200 ka b.p. indicates a dramatic variation in the evolution of the gulf, with the initiation of a new strike-slip fault of the NAFZ and a corresponding uplift of the Armutlu Peninsula in the south of the gulf. During the evolution of this fault from a wide shear zone consisting of right-stepped strike-slip faults and pull-apart basins to a localized principal fault zone, sediments were deposited under the influence of northerly prograding terrestrial and shallow-marine conditions due to relative sea-level fluctuations in the Marmara Sea. During this period, the Gulf of İzmit was invaded mainly by Mediterranean and partly by Black Sea waters. In the latest glacial period, shallow areas in the gulf became subaerially exposed, whereas the central and western sub-basins of the gulf turned into lakes. The present evolution of the Gulf of İzmit is controlled by the after effects of the new rupture of the NAFZ and the estuarine nature of the gulf environment.     

Shallow Water Bathymetry Derived from Green Wavelength Terrestrial Laser Scanner

Abstract

Shallow water bathymetry has proved to be a challenging task for remote sensing applications. In this work, Green-Wavelength Terrestrial Laser Scanning (GWTLS) is employed to survey nearshore bathymetry under clear atmospheric and water conditions. First, the obtained seabed points were corrected for refraction and then geo-registration, and filtering processes were exerted to obtain an accurate bathymetric surface. Terrain analysis was performed with respect to a reference surface derived from classical surveying techniques. The overall analysis has shown that the best results stem from 35° to 50° incident angles, whereas for angles higher than 65° measurements are not acceptable, although for the same angle in front and close to the instrument accuracy is considered acceptable due to the high laser power. Also, high resolution micro-topography, shallower than 1?m water depth, was managed to be captured. Systematic experimental approaches are expected to improve the GWTLS technique to detect bathymetry, which is anticipated to assist in mapping very shallow foreshore, tidal, and deltaic environments, to contribute conceptual into developing hybrid observation systems for coastal monitoring, and also to be applied in various maritime applications.     

Advances in the fatigue assessment of wire ropes

This paper presents the findings from an in-depth analysis of the (axial) stiffness data recorded during tension–tension fatigue tests on wire ropes, particularly in relation to how changes in stiffness during testing relate to changes in rope strength. A linear relationship between stiffness and strength is shown to exist and a methodology presented for quantifying residual strength with applied cycles. New lower bound fatigue lines for six-strand rope and spiral strand are presented which are based on a 10% loss of strength. These new lines have the advantage of having been established using a common discard criterion for wire ropes.     

A low level supplementary heating system for free divers

A simple and effective method of heating divers in extreme cold water has been developed. The local heating concept utilizes a uniformly distributed granular mixture of magnesium and iron particles packed in small sachets. Upon activation by sea water, the two metal mixture behaves as a multitude of short-circuited electrolytic cells, producing thermal energy rather than electrical energy. The 45 mm-square sachets may be placed where heating is required on the diver's body, thus giving rise to the term “local heating”, obviously, the heating system requires no pumping device, or distribution network. Heating rate and duration of output of the sachets are controlled by particle size, and mixture ratio of the constituent Mg and Fe particles.This paper described the development, testing and performance of the heating sachets. Results of live tests in different dive situations are also presented and discussed.     

White-light promoted degradation of leucopterin and related pteridines dissolved in seawater, with evidence for involvement of complexation from major divalent cations of seawater

The photochemical instability of several related pteridines in seawater was investigated by aseptic incubation of solutions at 20–22°C under illumination from cool-white light of intensity 6 kerg cm⁻² sec⁻¹, and the chemical changes were spectrophotometrically monitored. All the pteridines showed markedly accelerated degradation from this illumination relative to their behaviour in total darkness.Pterin and lumazine were degraded very slowly with zero-order reaction kinetics, while the other pteridines photolysed rapidly (according to first-order kinetics) with decomposition rates increasing in the order dioxylumazine (2,4,6,7-tetrahydroxypteridine) < leucopterin < isoxanthopterin < xanthopterin < oxylumazine (2,4,6-trihydroxypteridine). Excepting leucopterin and dioxylumazine, the photolysis rates were attributable to the pH of seawater and not its salt content; this was also the case with oxylumazine which required the salt content of seawater for decomposition in darkness. Leucopterin and dioxylumazine (both 6,7-dihydroxylated pteridines) gave evidence of complexation with the major divalent cations (Ca²⁺, Mg²⁺) of seawater, by virtue of which their photolytic degradation rates were enhanced to magnitudes obtained in pH-10 buffer without seawater. It is proposed that such complexation produces structural forms of these pteridines analogous to their normal ionic forms at pH 10–12.The photolysis of the 6-hydroxylated pteridines (xanthopterin, oxylumazine) proceeded via intermediate formation of their corresponding 7-hydroxylated derivatives (leucopterin, dioxylumazine).     

A Classification of Hypersaline Waters, Based on Trophic Criteria

Abstract. A classification of hypersaline waters is proposed on the basis of the food chain structure of their biota. Four steps of increasing salinity and respective shortening of the food-chains are recognized, respectively named: alpha-, beta-, gamma- and delta-hypersaline waters.
Some general aspects, dealing with cosmopolitism of the biota, production, competition and benthic ecology in hypersaline waters are discussed.
The relevance of ecological studies in hypersaline waters to theoretical ecology and to the new technological uses of saline waters is briefly mentioned.     

Comparison of the biology, dynamics, and secondary production of Talorchestia brito (Amphipoda, Talitridae) in Atlantic (Portugal) and Mediterranean (Tunisia) populations

The biology, population dynamics, and production of Talorchestia brito were studied at two sandy beaches located on the Atlantic (Portugal) and on the Mediterranean (Tunisia) coasts, respectively. The seasonal variation in abundance and the overall densities were similar in both populations. Reproduction occurred from February to September in the Atlantic, and from March to early November in the Mediterranean. The sex ratio was male biased in the Atlantic, and female biased in the Mediterranean. Based on data from the Atlantic population, both abundance and the proportion of reproductive females were positively correlated with temperature, while the proportion of juveniles in the population was positively correlated with temperature and sediment moisture. On average, individuals from the Atlantic were larger than the ones from the Mediterranean. Life span was estimated at six to nine months in the Atlantic, and five to eight months in the Mediterranean. Talorchestia brito was shown to be a semiannual species, with iteroparous females producing two broods per year, and exhibited a bivoltine life cycle. The minimum age required for males' and females' sexual differentiation and for female sexual maturation was shorter in the Mediterranean. Growth production (P) was estimated at 0.19 g m⁻² y⁻¹ ash free dry weight (AFDW; 4.3 kJ m⁻² y⁻¹) in the Atlantic population, and 0.217 g m⁻² y⁻¹ AFDW (4.9 kJ m⁻² y⁻¹) in the Mediterranean one. Elimination production (E) was estimated at 0.35 g m⁻² y⁻¹ AFDW (7.9 kJ m⁻² y⁻¹) in the Atlantic, and 0.28 g m⁻² y⁻¹ AFDW (6.3 kJ m⁻² y⁻¹) in the Mediterranean. The average annual biomass ( ) (standing stock) was estimated at 0.032 g m⁻² in the Atlantic beach, and 0.029 g m⁻² in the Mediterranean one, resulting, respectively, in ratios of 5.9 and 7.5 and ratios of 10.8 and 9.6. Like other talitrids, T. brito exhibited geographic variation in morphometrical characteristics, sex ratio, growth rates, life span, and reproduction period, with the Atlantic population presenting a slower life history.     

Effects of water-borne copper on metallothionein and lipid peroxidation in the marine amphipod Gammarus locusta

The aim of the current work was to determine over 10 days the effects of water-borne exposure of the marine amphipod Gammarus locusta to 4 microgCu l(-1) on the metallothionein (MT; measured by differential pulse polarography) protection system and lipid peroxidation (LP: thiobarbituric acid-reactive malondialdehyde equivalents) as a measure of oxidative damage. MT levels in exposed animals increased significantly at day 2 (36% > control; P < 0.001) and remained high at days 6 and 10 (55 and 38%, respectively, P < 0.001). The maximum level of MT at day 6 coincided with the highest Cu body-burden. LP increased within I day of exposure, indicative of Cu as an oxidative stressor. However, in contrast to MT, the highest LP level was seen at day 4 (68% > control, P < 0.001) before returning to control values by day 6, indicating a protective role of MT against the pro-oxidant effects of Cu.