A review of jet grouting practice and development

The jet grouting technique was originally initiated in the UK and progressively developed following the needs for larger geometries, ease of implementation, economic rationality, and better mechanical properties. This paper presents a comprehensive review of the development and practice of jet grouting through some fundamental concepts and relevant case studies. Subsequently, a laboratory testing program is performed to investigate the factors affecting the efficacy of the twin grouting system. The principal objective of this study is to define the suitable conditions for the jet grouting efficacy regarding economic rationality as well as quality control. For the first phase, a particular emphasis is placed on the properties of jet columns, site geological conditions, implementation methods, and the justification of each selected treatment option, while the second phase mainly focuses on the unconfined compressive strength (UCS) tests. It follows that the mono-fluid jet grouting system presents a valuable flexibility in dealing with complex configurations; yet, the double- and triple-fluid systems are more indicated for cases of mass treatments for which large portions of space must be treated and overlapping is fundamentally important for the reliability of the treatment. Furthermore, it was established that the efficacy of the twin-jet method primarily relies on the proper adequacy of some critical parameters, namely, the cement content, the water-cement ratio, and cement slurry-water glass ratio. In spite of some uncertainties inherently related to the technique, the UCS test represents the quintessential laboratory index for evaluating the mechanical properties of grouted elements, deriving jet grouting efficacy and the economics of jet grouts.     

Logistic regression model for sinkhole susceptibility due to damaged sewer pipes

The occurrence of anthropogenic sinkholes in urban areas can lead to severe socioeconomic losses. A damaged underground sewer pipe is regarded as one of the primary causes of such a phenomenon. This study adopted the best subsets regression method to produce a logistic regression model that evaluates the susceptibility for sinkholes induced by damaged sewer pipes. The model was developed by analyzing the sewer pipe network as well as cases of sinkholes in Seoul, South Korea. Among numerous sewer pipe characteristics tested as explanatory variables, the length, age, elevation, burial depth, size, slope, and materials of the sewer pipe were found to influence the occurrence of sinkhole. The proposed model reasonably estimated the sinkhole susceptibility in the area studied, with an area value under the receiver-operating characteristics curve of 0.753. The proposed methodology will serve as a useful tool that can help local governments to choose a cavity inspection regime, and to prevent sinkholes induced by damaged sewer pipes.     

Estimating urban above ground biomass with multi-scale LiDAR

Background

Urban trees have long been valued for providing ecosystem services (mitigation of the “heat island” effect, suppression of air pollution, etc.); more recently the potential of urban forests to store significant above ground biomass (AGB) has also be recognised. However, urban areas pose particular challenges when assessing AGB due to plasticity of tree form, high species diversity as well as heterogeneous and complex land cover. Remote sensing, in particular light detection and ranging (LiDAR), provide a unique opportunity to assess urban AGB by directly measuring tree structure. In this study, terrestrial LiDAR measurements were used to derive new allometry for the London Borough of Camden, that incorporates the wide range of tree structures typical of an urban setting. Using a wall-to-wall airborne LiDAR dataset, individual trees were then identified across the Borough with a new individual tree detection (ITD) method. The new allometry was subsequently applied to the identified trees, generating a Borough-wide estimate of AGB.

Results

Camden has an estimated median AGB density of 51.6 Mg ha^–1 where maximum AGB density is found in pockets of woodland; terrestrial LiDAR-derived AGB estimates suggest these areas are comparable to temperate and tropical forest. Multiple linear regression of terrestrial LiDAR-derived maximum height and projected crown area explained 93% of variance in tree volume, highlighting the utility of these metrics to characterise diverse tree structure. Locally derived allometry provided accurate estimates of tree volume whereas a Borough-wide allometry tended to overestimate AGB in woodland areas. The new ITD method successfully identified individual trees; however, AGB was underestimated by ≤?25% when compared to terrestrial LiDAR, owing to the inability of ITD to resolve crown overlap. A Monte Carlo uncertainty analysis identified assigning wood density values as the largest source of uncertainty when estimating AGB.

Conclusion

Over the coming century global populations are predicted to become increasingly urbanised, leading to an unprecedented expansion of urban land cover. Urban areas will become more important as carbon sinks and effective tools to assess carbon densities in these areas are therefore required. Using multi-scale LiDAR presents an opportunity to achieve this, providing a spatially explicit map of urban forest structure and AGB.

     

Assessment of regional drought vulnerability and risk using principal component analysis and a Gaussian mixture model

Due to the complex characteristics of drought, drought risk needs to be quantified by combining drought vulnerability and drought hazard. Recently, the major focus in drought vulnerability has been on how to calculate the weights of indicators to comprehensively quantify drought risk. In this study, principal component analysis (PCA), a Gaussian mixture model (GMM), and the equal-weighting method (EWM) were applied to objectively determine the weights for drought vulnerability assessment in Chungcheong Province, located in the west-central part of South Korea. The PCA provided larger weights for agricultural and industrial factors, whereas the GMM computed larger weights for agricultural factors than did the EWM. The drought risk was assessed by combining the drought vulnerability index (DVI) and the drought hazard index (DHI). Based on the DVI, the most vulnerable region was CCN9 in the northwestern part of the province, whereas the most drought-prone region based on the DHI was CCN12 in the southwest. Considering both DVI and DHI, the regions with the highest risk were CCN12 and CCN10 in the southern part of the province. Using the proposed PCA and GMM, we validated drought vulnerability using objective weighting methods and assessed comprehensive drought risk considering both meteorological hazard and socioeconomic vulnerability.

     

Resistivity of reservoir sandstones and organic rich shales on the Barents Shelf:Implications for interpreting CSEM data

Marine controlled source electromagnetic(CSEM)data have been utilized in the past decade during petroleum exploration of the Barents Shelf,particularly for de-risking the highly porous sandstone reservoirs of the Upper Triassic to Middle Jurassic Realgrunnen Subgroup.In this contribution we compare the resistivity response from CSEM data to resistivity from wireline logs in both water-and hydrocarbon-bearing wells.We show that there is a very good match between these types of data,particularly when reservoirs are shallow.CSEM data,however,only provide information on the subsurface resistivity.Careful,geology-driven interpretation of CSEM data is required to maximize the impact on exploration success.This is particularly important when quantifying the relative re-sistivity contribution of high-saturation hydrocarbon-bearing sandstone and that of the overlying cap rock.In the presented case the cap rock comprises predominantly organic rich Upper Jurassic-Early Cretaceous shales of the Hekkingen Formation(i.e.a regional source rock).The resistivity response of the reservoir and its cap rock become merged in CSEM data due to the transverse resistance equivalence principle.As a result of this,it is imperative to understand both the relative contributions from reservoir and cap rock,and the geological sig-nificance of any lateral resistivity variation in each of the units.In this contribution,we quantify the resistivity of organic rich mudstone,i.e.source rock,and reservoir sandstones,using 131 exploration boreholes from the Barents Shelf.The highest resistivity(＞10,000 Ωm)is evident in the hydrocarbon-bearing Realgrunnen Subgroup which is reported from 48 boreholes,43 of which are used for this study.Pay zone resistivity is primarily controlled by reservoir quality(i.e.porosity and shale fraction)and fluid phase(i.e.gas,oil and water saturation).In the investigated wells,the shale dominated Hekkingen Formation exhibits enhanced resistivity compared to the background(i.e.the underlying and overlying stratigraphy),though rarely exceeds 20Ωm.Marine mudstones typically show good correlation between measured organic richness and resistivity/sonic velocity log signatures.We conclude that the resistivity contribution to the CSEM response from hydrocarbon-bearing sandstones out-weighs that of the organic rich cap rocks.     

Southwestward intrusion of korea strait bottom cold water observed in 2003 and 2004

Hydrographic surveys were carried out four times in the western channel of the Korea Strait in March and August 2003 and in June and November 2004. The bottom cold water, which was lower than 10°C, appeared in the channel trough except in March 2003. It flowed southwestward along the shelf of Korean coasts in August 2003 and in November 2004. The width and the maximum speed of the intrusion current were about 20 km and approximately 25 cm s^-1, respectively, off Ulsan, Korea. The volume transport of the bottom cold water was estimated 0.019 Sv (Sv≡10⁶ m³ s^-1) in August 2003 and 0.026 Sv in November 2004.     

Validation of Reference Genes for Quantitative Gene Expression Studies in Octopus minor

Widely distributed on tidal flats on the west and south coast of Korea, the long arm octopus Octopus minor is one of the important shellfish resources, as     

Changes in Fish Assemblages after Dike Construction in the Saemangeum Area

In the Saemangeum area, construction of a dike began in 1991 and was completed in 2006; desalination is currently being conducted. In order to investigate     

Assessing Cryptic Invasion State: Fine-Scale Genetic Analysis of Ciona savignyi Population in Putative Native Habitat of the Korean Coast

The solitary ascidian, Ciona savignyi (Ascidiacea, Enterogona) is a notorious marine invader still expanding its habitat range worldwide. This species is considered native to the North West Pacific, but its indigeneity in Korean coastal waters has been questioned because of outdated taxonomic records and its inhabitation of oceanographically marginal areas. To clarify their cryptic invasion state, 247 individual C. savignyi samples were collected from 12 harbors and marinas on the Korean coast, and a 744 bp region of mitochondrial DNA (mtDNA) cytochrome c oxidase subunit I gene was sequenced and analyzed. Our analyses of population genetic structure and demographic history provided considerable pieces of evidence supporting their long-term establishment on the Korean coasts: differentiated population genetic structure, sequentially arrayed star-shape haplotype network, neutrality test results of past population expansions, and post-glacial colonization pattern of demography. Consequently, we concluded that C. savignyi populations on the Korean Coast are indigenous rather than exotic. These results could be used as reference data for further phylogeo graphic and demographic studies of problematic Ciona species, and to clarify and resolve similar cryptic invasion states of the other Korean coastal marine organisms. This study is the first to resolve the cryptic in vasion state of Korean marine organisms using genetic analysis.

     

Tectonostratigraphic framework and depositional history of the deepwater Ulleung Basin,East Sea/Sea of Japan

The Ulleung Basin, East Sea/Japan Sea, is a Neogene back-arc basin and occupies a tectonically crucial zone under the influence of relative motions between Eurasian, Pacific and Philippine Sea plates. However, the link between tectonics and sedimentation remains poorly understood in the back-arc Ulleung Basin, as it does in many other back-arc basins as well, because of a paucity of seismic data and controversy over the tectonic history of the basin. This paper presents an integrated tectonostratigraphic and sedimentary evolution in the deepwater Ulleung Basin using 2D multichannel seismic reflection data. The sedimentary succession within the deepwater Ulleung Basin is divided into four second-order seismic megasequences (MS1 to MS4). Detailed seismic stratigraphy interpretation of the four megasequences suggests the depositional history of the deepwater Ulleung Basin occurred in four stages, controlled by tectonic movement, volcanism, and sea-level fluctuations. In Stage 1 (late Oligocene through early Miocene), syn-rift sediment supplied to the basin was restricted to the southern base-of-slope, whereas the northern distal part of the basin was dominated by volcanic sills and lava flows derived from initial rifting-related volcanism. In Stage 2 (late early Miocene through middle Miocene), volcanic extrusion occurred through post-rift, chain volcanism in the earliest time, followed by hemipelagic and turbidite sedimentation in a quiescent open marine setting. In Stage 3 (late middle Miocene through late Miocene), compressional activity was predominant throughout the Ulleung Basin, resulting in regional uplift and sub-aerial erosion/denudation of the southern shelf of the basin, which provided enormous volumes of sediment into the basin through mass transport processes. In Stage 4 (early Pliocene through present), although the degree of tectonic stress decreased significantly, mass movement was still generated by sea-level fluctuations as well as compressional tectonic movement, resulting in stacked mass transport deposits along the southern basin margin. We propose a new depositional history model for the deepwater Ulleung Basin and provide a window into understanding how tectonic, volcanic and eustatic interactions control sedimentation in back-arc basins.