滇西北亚高山针叶林、硬叶栎类林的树种多样性

在滇西北香格里拉地区,以长苞冷杉(Abiesgeorgei)林、丽江云杉(Picealikiangensis)林作为亚高山针叶林的代表,以川滇高山栎(Quercusaquifolioides)林作为硬叶栎类林的代表,分别选择了6块样地,采用Shannon-Wiener多样性指数(H)、Simpson多样性指数的倒数(D')、Pielou均匀度指数(JH、JD)分别测定其树种多样性,并进行了比较研究。结果表明,三个森林类型的Shannon Wiener指数、Simpson指数的倒数、物种丰富度的顺序均为:长苞冷杉林>川滇高山栎林>丽江云杉林;而前两类森林的Pielou均匀度指数差异不大,但都高于丽江云杉林的均匀度指数值。滇西北的川滇高山栎具有很强的萌生能力。人工种植的亚高山针叶林的树种多样性较原始林低,需要较长时间的恢复过程。亚高山针叶林的存在极大地丰富了云南省的树种多样性,使云南植被的垂直地带性得到了充分体现。     

Dynamic processes of a simple linear dune—a study in the Taklimakan Sand Sea, China

Samples of dune sands, surveys of the morphology and field measurements of wind velocity and direction of a simple linear dune in Taklimakan Sand Sea show that the airflow and sand flux vary with the change of wind direction on the dune surface. Decrease of the airflow stress on the lee flank does not result in much decrease of the sand flux because of the low threshold shear velocities and the airflow conditions. There are no significant relations between the sand flux on the lee flank and the angle of incidence of the airflow. The low threshold shear velocities and the maintenance of the sand flux at the lee flank are the main mechanisms keeping the linear shape of the dunes. Measurements of the sand flux shows that it reaches a maximum on the crest of the dune. The grain size of the transported sands has some differences compared to that of the dune surface. The sands transported are finer than that on the dune surface, but better sorted under the influence of the medium to low wind activity. The field experiment results exhibit that it is possible for the dunes to be shaped as linear dunes during the processes of accumulation and elongation.     

压电双晶片双向大幅振动的探讨

通过压电陶瓷的逆压电效应对压电陶瓷双晶片在自动生产送料线上的应用研究，得出在二元系Ph(Ni1／3Nb2／3)O3-PhTiO3-PhZrO3的基础上作调整制作的压电双晶片。经运用在振动料斗上，作调频调幅控制。达到了压电双晶片振子结构，振子谐振频率为300Hz，当外加电压达300V时，振子偏转位移量大于1．7mm，故可作为一种理想的振动源。     

灰色系统在地面沉降分析中的应用

该文将灰色系统理论引入地面沉降的研究之中。根据上海地面沉降的历史数据建立了上海地面沉降发展的GM(1,1)模型以及地面沉降与地下水位变化的映射GM(1,2)模型,最后运用所建立的模型对地面沉降的发展态势进行了预测。     

辽西朝阳盆地早白垩世一新的无齿翼龙化石

采自辽西朝阳盆地早白垩世九佛堂组的一翼龙化石被记述。化石材料是一接近完整骨架的无齿的翼龙，带有一不完全的头骨。作者将其归于翼手龙类(Pteroclactyloidea)，并建一新属、新种一无齿吉大翼龙(Jidapterus edentus gen．et sp．nov．)。     

叶碲铋矿研究中存在问题分析

叶碲铋矿最初定名为wehrlite，结构式为Bi2 xTe3-x，后于1982年改名为pilsenite，结构式相应改为Bi4Te3。楚碲铋矿(BiTe)的成分介于原叶碲铋矿的成分范围之内。有些研究者仍用原成分确定叶碲铋矿或把楚碲铋矿当作叶碲铋矿，本文旨在提醒研究者注意，避免误用。     

小松山超基性杂岩体橄榄石的岩组分析

沿贺兰山台褶带北部西缘深大断裂带分布的小松山超基性杂岩体属岩浆结晶分异形成的似层状含铬岩体，岩组分析表明岩体中橄榄石具有高度的定向性。笔者通过研究认为，这种定向性系岩浆上侵过程中的流动分异作用影响造成，反映了小松山岩体系构造动荡环境下的产物。     

河道沿岸芦苇带对氨氮的削减特性研究

氨氮污染已成为我国江河湖库水质下降和水生态系统退化的重要因素之一.借助现场对比观测试验和理论分析的方法,研究不同季节氨氮对河流水质的影响规律,得到了雨洪初期汇流河流水质污染最为严重的结论.系统地研究了沿河岸芦苇带对氨氮的削减净化效应,得到了芦苇带吸附氨氮的主要影响因素为:芦苇生长期、水体污染物浓度、河道流速及气象条件.运用数值模拟和参数优化估算技术,确定氨氮在河道两岸有、无芦苇等植物条件下的衰减系数和削减量,分析了衰减系数的变化规律和削减量大小的影响因素,为河流水生态系统修复和水质预测预报提供科学依据.     

地震参数计算与数据传输程序设计

设计了一种地震参数计算与数据传输程序，能够通过交互方式自动完成mb、mB、MS7、MS、ML五个震级及其他相关地震参数的计算，自动生成大震速报文件，直接连接PCU速报。不仅适用于数字地震仪同时也可以用于模拟仪器(如DD—1，DK—1)解决了SSB大震速报软件数据不易改动、容易出错、速度慢等问题。同时也完善了SSDP软件参数计算功能，提高了数字测震台的效能和速报水平，充分发挥了数字地震仪的优越性。     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.