Recent developments in centrifuge modelling of tectonic processes: equipment,model construction techniques and rheology of model materials

The Experimental Tectonics Laboratory at Queen's University is equipped with a large-capacity centrifuge that is capable of subjecting tectonic models measuring 127 × 76 mm in plan and up to 51 mm in depth to accelerations as high as 20,000 g. This high capacity greatly extends the range of potential model materials and permits the use of relatively stiff and/or brittle substances.A number of new techniques of model construction have been devised, that permit internal and surface strain patterns and kinematic evolution to be monitored in detail. One particularly useful technique, which will find application in non-centrifuged experiments as well, allows the preparation of highly uniform anisotropic multilayers composed of alternating layers of Plasticine and silicone putty, with individual layer thicknesses as low as 20 μm and with controllable ratio between thicknesses of the relatively competent and incompetent units. Examples of models constructed using these new techniques are illustrated.One particular type of the commonly used model material, silicone putty, has been subjected to a series of rheological test. The results indicate that at strain rates in the range 10^?6-10^?3s^?1 (applicable to the centrifuge experiments) the silicone putty exhibits power-law rheology with n = 7 ± 2. At higher strain rates the material appears to tend towards linear behaviour.Available rheological data and dimensional analysis using standard scaling laws and appropriate model ratios suggest that the microlaminated Plasticine-silicone putty multilayer is a suitable analogue, in centrifuged experiments, for interbedded sequences of indurate limestone and incompetent shale. The excellent degree of dynamic similitude attained is demonstrated by the realistic form of fold and fault structures developed in models constructed of this material.     

Microvariability in the early stages of cobble weathering by microenvironment on a glacier foreland,Storbreen, Jotunheimen,Norway

The initial stages of cobble weathering, measured as increasing percentage porosity, were calculated for sets of cobbles taken from the foreland of Storbreen, a cirque glacier in the Jotunheimen, Norway. Cobbles were taken from in front of the 1998 glacier snout, from the 1928, 1870, 1810 and 1750 moraine crests and from the ～10 000‐year‐old land surface beyond the Neoglacial foreland limit. Three microenvironments were examined within each site: (1) lichen‐free surfaces from exposed cobbles, (2) lichen‐covered surfaces from exposed cobbles and (3) buried cobbles taken from a soil depth of ～40 cm. Percentage porosity within plagioclase minerals was calculated using backscatter electron images of prepared thin sections. Porosity was calculated from five depth profiles into each cobble. Depth profiles were subdivided into a sequence of 50 µm × 50 µm rectangles running to at least a nominal depth of 500 µm within each cobble. Three cobbles from each dated land surface were sampled, except for the 1750 surface, which had five cobbles. Statistical analysis was by analysis of variance of rank‐order transformed data. Findings indicate that cobbles close to the glacier snout are largely unweathered; also, weathering is generally weak in the 1928, 1870 and 1810 positions, but statistically significantly higher in the 1750‐ and 10 000‐year‐old positions. Weathering of buried cobbles always exceeded weathering of exposed cobbles and may possibly reach a value beyond which it cannot progress while retaining surface cohesion. The degree of weathering on lichen‐free and lichen‐covered cobble surfaces is not initially distinguishable, but diverges sharply after ～250 years, when lichen‐covered surfaces experience significantly higher totals. Overall, the weathering trend in cobbles matches that found in soils at the same sites. Copyright © 2007 John Wiley & Sons, Ltd.     

Prairie or planted? Using time-series NDVI to determine grassland characteristics in Montana

Temperate grasslands are a highly threatened global biome. Complicating management and conservation strategy development, modern grasslands can be difficult to characterize across landscapes since they range from native and semi-native to completely non-native species compositions such as those found in heavily managed pastures. Similar to methods used to differentiate C3 and C4 grasses, we investigate the ability of using temporal variations in growth characteristics as an alternative pathway to predicting native versus introduced species composition across grassland landscapes. To do this, we conducted an exploratory analysis using a time-series of Normalized Difference Vegetation Index values as a measure of vegetation greenness with Landsat 5 TM imagery across a growing season and performed an unsupervised classification. Results from the classification were compared with field observation to determine if we can differentiate between native and introduced grassland types in the Northwest Glaciated Plains subecoregion of northeastern Montana. Our results indicated that we predicted grassland cover with 81% accuracy within our 200 km² study area and 71% accuracy in our 5000 km² secondary study area. Further extrapolation of our methodology, combined with the refinement of vegetation indices of time-series imagery, classification algorithms and the availability of data from planned Landsat and Sentinel missions, may provide the spatial detail necessary to improve grassland monitoring and rangeland management over large areas.     

Extensive deep-sea dispersal of postlarval shrimp from a hydrothermal vent

Hydrothermal vent fields on the Mid-Atlantic Ridge (MAR) are small (no more than 0.1-1.0 km²) and widely spaced (a reported average of one field per 175 km between 11°N and 40°N). Their faunas are similar and usually dominated by shrimp of the family Bresiliidae. Little is known about the way these animals (and other members of the vent fauna) disperse and colonize new vents. Vent shrimp juveniles have been taken close to certain vent sites, and in midwater, but their larvae and postlarvae have not been captured. We report here that bresiliid shrimp postlarvae are very widely dispersed around the Broken Spur vent field and extend into the next MAR segment and the Atlantis Fracture Zone beyond. The populations show density gradients declining both vertically and horizontally from the vent site, in contrast to the overall pelagic biomass. This is the furthest recorded dispersal (> 100 km) of identified larvae from a hydrothermal vent and is sufficient to give them access to adjacent vent fields and thus the scope for colonising new sites.     

Decentralization and local institutional arrangements for wetland management in Ethiopia and Sierra Leone

In Ethiopia and Sierra Leone, recent social, political and environmental transformations have precipitated the intensification of wetland use, as local people have sought to safeguard and strengthen their livelihoods. Concurrent decentralization policies in both countries have also seen the government strengthen its position at the local level. Drawing upon recent field-based evidence from Ethiopia and Sierra Leone, this paper examines the compatibility between community-based local institutions for wetland use, and the process of decentralization. It argues that decentralization has in fact restricted the development of mature local institutional arrangements, due to its intrinsically political interventionist nature.     

The critical role of climate and saprolite weathering in landscape evolution

Landscapes evolve in response to external forces, such as tectonics and climate, that influence surface processes of erosion and weathering. Internal feedbacks between erosion and weathering also play an integral role in regulating the landscapes response. Our understanding of these internal and external feedbacks is limited to a handful of field‐based studies, only a few of which have explicitly examined saprolite weathering. Here, we report rates of erosion and weathering in saprolite and soil to quantify how climate influences denudation, by focusing on an elevation transect in the western Sierra Nevada Mountains, California. We use an adapted mass balance approach and couple soil‐production rates from the cosmogenic radionuclide (CRN) ¹⁰Be with zirconium concentrations in rock, saprolite and soil. Our approach includes deep saprolite weathering and suggests that previous studies may have underestimated denudation rates across similar landscapes. Along the studied climate gradient, chemical weathering rates peak at middle elevations (1200–2000 m), averaging 112·3 ± 9·7 t km^–2 y^–1 compared to high and low elevation sites (46·8 ± 5·2 t km^?2 y^?1). Measured weathering rates follow similar patterns with climate as those of predicted silica fluxes, modeled using an Arrhenius temperature relationship and a linear relationship between flux and precipitation. Furthermore, chemical weathering and erosion are tightly correlated across our sites, and physical erosion rates increase with both saprolite weathering rates and intensity. Unexpectedly, saprolite and soil weathering intensities are inversely related, such that more weathered saprolites are overlain by weakly weathered soils. These data quantify exciting links between climate, weathering and erosion, and together suggest that climate controls chemical weathering via temperature and moisture control on chemical reaction rates. Our results also suggest that saprolite weathering reduces bedrock coherence, leading to faster rates of soil transport that, in turn, decrease material residence times in the soil column and limit soil weathering. Copyright © 2009 John Wiley & Sons, Ltd.     

Large wood distribution,mobility, and recruitment in an inter‐dam river reach: A comparison with geomorphic process on the Garrison Reach of the Missouri River pre and post the historical 2011 flood

This study assessed the effect of the largest flood since dam regulation on geomorphic and large wood (LW) trends using LW distributions at three time periods on the 150 km long Garrison Reach of the Missouri River. In 2011, a flood exceeded 4390 m³/s for a two‐week period (705% above mean flow; 500 year flood). LW was measured using high resolution satellite imagery in summer 2010 and 2012. Ancillary data including forest character, vegetation cover, lateral bank retreat, and channel capacity. Lateral bank erosion removed approximately 7400 standing trees during the flood. Other mechanisms, that could account for the other two‐thirds of the measured in‐channel LW, include overland flow through floodplains and islands. LW transport was commonly near or over 100 km as indicated by longitudinal forest and bank loss and post‐flood LW distribution. LW concentrations shift at several locations along the river, both pre‐ and post‐flood, and correspond to geomorphic river regions created by the interaction of the Garrison Dam upstream and the Oahe Dam downstream. Areas near the upstream dam experienced proportionally higher rates of bank erosion and forest loss but in‐channel LW decreased, likely due to scouring. A large amount of LW moved during this flood, the chief anchoring mechanism was not bridges or narrow channel reaches but the channel complexity of the river delta created by the downstream reservoir. Areas near the downstream dam experienced bank accretion and large amounts of LW deposition. This study confirms the results of similar work in the Reach: despite a historic flood longitudinal LW and channel trends remain the same. Dam regulation has created a geomorphic and LW pattern that is largely uninterrupted by an unprecedented dam regulation era flood. River managers may require other tools than infrequent high intensity floods to restore geomorphic and LW patterns. Copyright © 2018 John Wiley & Sons, Ltd.     

Improved Method for Estimating Reaction Rates During Push-Pull Tests

The breakthrough curve obtained from a single-well push-pull test can be adjusted to account for dilution of the injection fluid in the aquifer fluid. The dilution-adjusted breakthrough curve can be analyzed to estimate the reaction rate of a solute. The conventional dilution-adjusted method assumes that the ratios of the concentrations of the nonreactive and reactive solutes in the injection fluid vs. the aquifer fluid are equal. If this assumption is invalid, the conventional method will generate inaccurate breakthrough curves and may lead to erroneous conclusions regarding the reactivity of a solute. In this study, a new method that generates a dilution-adjusted breakthrough curve was theoretically developed to account for any possible combination of nonreactive and reactive solute concentrations in the injection and aquifer fluids. The newly developed method was applied to a field-based data set and was shown to generate more accurate dilution-adjusted breakthrough curves. The improved dilution-adjusted method presented here is simple, makes no assumptions regarding the concentrations of the nonreactive and reactive solutes in the injection and aquifer fluids, and easily allows for estimating reaction rates during push-pull tests.