Oxygen isotopic compositions of Allende Type C CAIs: Evidence for isotopic exchange during nebular melting and asteroidal metamorphism

In situ oxygen isotopic measurements of primary and secondary minerals in Type C CAIs from the Allende CV3 chondrite reveal that the pattern of relative enrichments and depletions of ¹⁶O in the primary minerals within each individual CAI are similar to the patterns observed in Types A and B CAIs from the same meteorite. Spinel is consistently the most ¹⁶O-rich (Δ¹⁷O = −25‰ to −15‰), followed by Al,Ti-dioside (Δ¹⁷O = −20‰ to −5‰) and anorthite (Δ¹⁷O = −15‰ to 0‰). Melilite is the most ¹⁶O-depleted primary mineral (Δ¹⁷O = −5‰ to −3‰). We conclude that the original melting event that formed Type C CAIs occurred in a ¹⁶O-rich (Δ¹⁷O  −20‰) nebular gas and they subsequently experienced oxygen isotopic exchange in a ¹⁶O-poor reservoir. At least three of these (ABC, TS26F1 and 93) experienced remelting at the time and place where chondrules were forming, trapping and partially assimilating ¹⁶O-poor chondrule fragments. The observation that the pyroxene is ¹⁶O-rich relative to the feldspar, even though the feldspar preceded it in the igneous crystallization sequence, disproves the class of CAI isotopic exchange models in which partial melting of a ¹⁶O-rich solid in a ¹⁶O-poor gas is followed by slow crystallization in that gas. For the typical (not associated with chondrule materials) Type C CAIs as well for as the Types A and B CAIs, the exchange that produced internal isotopic heterogeneity within each CAI must have occurred largely in the solid state. The secondary phases grossular, monticellite and forsterite commonly have similar oxygen isotopic compositions to the melilite and anorthite they replace, but in one case (CAI 160) grossular is ¹⁶O-enriched (Δ¹⁷O = −10‰ to −6‰) relative to melilite (Δ¹⁷O = −5‰ to −3‰), meaning that the melilite and anorthite must have exchanged its oxygen subsequent to secondary alteration. This isotopic exchange in melilite and anorthite likely occurred on the CV parent asteroid, possibly during fluid-assisted thermal metamorphism.     

Metallographic cooling rates and origin of IVA iron meteorites

We have determined the metallographic cooling rates for 13 IVA irons using the most recent and most accurate metallographic cooling rate model. Group IVA irons have cooling rates that vary from 6600 °C/Myr at the low-Ni end of the group to 100 °C/Myr at the high-Ni end of the group. This large cooling rate range is totally incompatible with cooling in a mantled core which should have a uniform cooling rate. Thermal and fractional crystallization models have been used to describe the cooling and solidification of the IVA asteroid. The thermal model indicates that a metallic body of 150 ± 50 km in radius with less than 1 km of silicate on the outside of the body has a range of cooling rates that match the metallographic cooling rates in IVA irons in the temperature range 700-400 °C where the Widmanstätten pattern formed. The fractional crystallization model for Ni with initial S contents between 3 and 9 wt% is consistent with the measured variation of cooling rate with bulk Ni and the thermal model. New models for impacts in the early solar system and the evolution of the primordial asteroid belt allow us to propose that the IVA irons crystallized and cooled in a metallic body that was derived from a differentiated protoplanet during a grazing impact. Other large magmatic iron groups, IIAB, IIIAB, and IVB, also show significant cooling rate ranges and are very likely to share a similar history.     

Rare earth elements (REE) and yttrium in stream waters, stream sediments, and Fe-Mn oxyhydroxides: Fractionation, speciation, and controls over REE + Y patterns in the surface environment

We have collected ∼500 stream waters and associated bed-load sediments over an ∼400 km² region of Eastern Canada and analyzed these samples for Fe, Mn, and the rare earth elements (REE + Y). In addition to analyzing the stream sediments by total digestion (multi-acid dissolution with metaborate fusion), we also leached the sediments with 0.25 M hydroxylamine hydrochloride (in 0.05 M HCl), to determine the REE + Y associated with amorphous Fe- and Mn-oxyhydroxide phases. We are thus able to partition the REE into “dissolved” (<0.45 μm), labile (hydroxylamine) and detrital sediment fractions to investigate REE fractionation, and in particular, with respect to the development of Ce and Eu anomalies in oxygenated surface environments. Surface waters are typically LREE depleted ([La/Sm]_NASC ranges from 0.16 to 5.84, average = 0.604, n = 410; where the REE are normalized to the North America Shale Composite), have strongly negative Ce anomalies ([Ce/Ce^∗]_NASC ranges from 0.02 to 1.25, average = 0.277, n = 354), and commonly have positive Eu anomalies ([Eu/Eu^∗]_NASC ranges from 0.295 to 1.77, average = 0.764, n = 84). In contrast, the total sediment have flatter REE + Y patterns relative to NASC ([La/Sm]_NASC ranges from 0.352 to 1.12, average = 0.778, n = 451) and are slightly middle REE enriched ([Gd/Yb]_NASC ranges from 0.55 to 3.75, average = 1.42). Most total sediments have negative Ce and Eu anomalies ([Ce/Ce^∗]_NASC ranges from 0.097 to 2.12, average = 0.799 and [Eu/Eu^∗]_NASC ranges from 0.39 to 1.43, average = 0.802). The partial extraction sediments are commonly less LREE depleted than the total sediments ([La/Sm]_NASC ranges from 0.24 to 3.31, average = 0.901, n = 4537), more MREE enriched ([Gd/Yb]_NASC ranges from 0.765 to 6.28, average = 1.97) and Ce and Eu anomalies (negative and positive) are more pronounced.The partial extraction recovered, on average ∼20% of the Fe in the total sediment, ∼80% of the Mn, and 21-29% of the REEs (Ce = 19% and Y = 32%). Comparison between REEs in water, partial extraction and total sediment analyses indicates that REEs + Y in the stream sediments have two primary sources, the host lithologies (i.e., mechanical dispersion) and hydromorphically transported (the labile fraction). Furthermore, Eu appears to be more mobile than the other REE, whereas Ce is preferentially removed from solution and accumulates in the stream sediments in a less labile form than the other REEs + Y. Despite poor statistical correlations between the REEs + Y and Mn in either the total sediment or partial extractions, based on apparent distribution coefficients and the pH of the stream waters, we suggest that either sediment organic matter and/or possibly δ-MnO₂/FeOOH are likely the predominant sinks for Ce, and to a lesser extent the other REE, in the stream sediments.     

Large and giant hydrocarbon accumulations in the transitional continent-ocean zone

The petroleum resource potential is considered for the Atlantic, West Pacific, and East Pacific types of deepwater continental margins. The most considerable energy resources are concentrated at the Atlantic-type passive margins in the zone transitional to the ocean. The less studied continental slope of backarc seas of the generally active margins of the West Pacific type is currently not so rich in discoveries as the Atlantic-type margin, but is not devoid of certain expectations. In some of their parameters, the margins bounded by continental slopes may be regarded as analogs of classical passive margins. At the margins of the East Pacific type, the petroleum potential is solely confined to transform segments. In the shelf-continental-slope basins of the rift and pull-apart nature, petroleum fields occur largely in the upper fan complex, and to a lesser extent in the lower graben (rift) complex. In light of world experience, the shelf-continental-slope basins of the Arctic and Pacific margins of Russia are evaluated as highly promising.     

Correlation of the Jurassic-Cretaceous siliceous-volcanogenic sediments in northwestern surroundings of the Pacific (Koryak Upland)

In distribution areas of the Pekul’neiveem and Chirynai formations customary distinguishable in the Koryak Upland, complicated tectonostratigraphic units are composed of alternating thrust sheets of different lithologic composition and age, which are juxtaposed because of widespread thrust faulting, as is proved by the radiolarian analysis. Nineteen radiolarian assemblages of different age are first established here in the Lower Jurassic-Hauterivian succession of siliceous-volcanogenic sediments. In the Lower Jurassic interval, the lower and upper Hettangian, lower and upper Sinemurian, and Pliensbachian beds are recognized. Paleontological characterization is also presented for the Aalenian (or Toarcian?-Aalenian), upper Bajocian, lower and upper Bathonian, and Callovian beds of the Middle Jurassic. Within the Upper Jurassic, the Oxfordian-early Kimmeridgian, late Kimmeridgian-early Tithonian, Tithonian, and late Tithonian-early Berriasian radiolarian assemblages are distinguished. The late Berriasian-early Valanginian, middle-late Valanginian, and Hauterivian radiolarian assemblages are first recognized or compositionally revised. Radiolarians and lithofacies data are used to correlate the tectonostratigraphic units and individualize the jasper-alkali basaltic (lower Hettangian), chert-terrigenous (Hettangian-Sinemurian), jasper-cherty (Pliensbachian-Aalenian), jasper (Bajocian-Hauterivian), jasper-basaltic (upper Bajocian-Valanginian), Fe-Ti basaltic (upper Bajocian-Bathonian), tuffitejasper-basaltic (Bathonian-Hauterivian), and terrigenous-volcanogenic (Bajocian-Valanginian) sequences. The correlation results are extrapolated into other continental areas flanking the Pacific, i.e., to the western Kamchatka, northern and northwestern coastal areas of the Sea of Okhotsk, where the analogous radiolarian assemblages are characteristic of comparable allochthonous units of terrigenous-siliceous-volcanogenic sediments.     

Planktonic foraminifers in the southern Bering Sea: Changes in composition and productivity during the Late Pleistocene-Holocene

Taxonomic composition and distribution of planktonic foraminifers are studied in section of Core GC-11 that penetrated through Upper Quaternary sediments of the Bowers Ridge western slope, the southern Bering Sea. As is shown, structure of foraminiferal assemblage and productivity have varied substantially during the last 32000 calendar years in response to changes in surface water temperatures and water mass circulation in the northern part of the Pacific, the Bering Sea included. The productivity was maximal during deglaciation epoch, being notably lower in the Holocene and minimal at the glaciation time.     

National-scale estimation of potentially harmful element ambient background concentrations in topsoil using parent material classified soil:stream–sediment relationships

Regulatory authorities require estimates of ambient background concentrations (ABCs) of potentially harmful elements (PHEs) in topsoil; such data are currently not available in many countries. High resolution soil geochemical data exist for only part of England and Wales, whilst stream sediment data cover the entire landscape. A novel methodology is presented for estimating soil equivalent ABCs for PHEs from high-resolution (HR) stream sediment geochemical data grouped by common parent materials (PM), using arsenic (As) as an example. Geometric mean (GM) values for local PM groups are used to investigate different approaches for transforming sediment to soil equivalent concentrations. Holdout validation is used to assess: (i) the optimum number of samples for calculating local GM values, and (ii) the optimum scale at which to group data when using linear regression analysis to estimate GM soil ABCs from local sediment geochemical values. Holdout validation showed that the smallest differences were generally observed when five observations were used to calculate the GM and that these should be grouped over the smallest possible area in order to encompass soils over PMs with elevated GM As concentrations. Geometric mean ABCs are estimated and mapped for As in mineral soil across all of England and Wales within delineations of PM polygons. Errors for the estimation of soil equivalent GM As ABCs based on sediment data for an independent validation set were of a similar magnitude to those from holdout validation applied to the original data suggesting the approach is robust. The estimates of soil equivalent ABCs suggest that As exceeds the regulatory threshold used in risk assessments for residential land use (20 mg kg⁻¹) across 16% of the landscape of England and Wales. The applicability of the method for cognate landscapes, and potential refinements is discussed.     

Integration and magnitude homogenization of the Egyptian earthquake catalogue

The aim of the present work is to compile and update a catalogue of the instrumentally recorded earthquakes in Egypt, with uniform and homogeneous source parameters as required for the analysis of seismicity and seismic hazard assessment. This in turn requires a detailed analysis and comparison of the properties of different available sources, including the distribution of events with time, the magnitude completeness, and the scaling relations between different kinds of magnitude reported by different agencies. The observational data cover the time interval 1900–2004 and an area between 22°–33.5° N and 25°–36° E. The linear regressions between various magnitude types have been evaluated for different magnitude ranges. Using the best linear relationship determined for each available pair of magnitudes, as well as those identified between the magnitudes and the seismic moment, we convert the different magnitude types into moment magnitudes M _W, through a multi-step conversion process. Analysis of the catalogue completeness, based on the M _W thus estimated, allows us to identify two different time intervals with homogeneous properties. The first one (1900–1984) appears to be complete for M _W ≥ 4.5, while the second one (1985–2004) can be considered complete for magnitudes M _W ≥ 3.