龙门山断裂带科学钻探3号井孔附近微震近震震级与矩震级的关系及意义

通过震源谱拟合得到龙门山断裂带科学钻探3号井孔附近218个微震的矩震级,并分别基于《地震台站监测规范》的量规函数(量规函数GF)和李学政等(2003)的量规函数(量规函数LXZ)计算了这些微震的两种近震震级。基于回归分析得到了两种近震震级与矩震级的关系,并讨论了此关系可能隐含的意义。近震震级与矩震级拟合关系M_W=a+bM_L中系数b的取值与应力降Δσ和地震矩M_0的关系相关,b=1/(1+γ)等价于Δσ∝M_0~γ,本文对应于γ=1的情形。由于动态应力降在数值上与静态应力降差别不大,这种关系同样适用于折合能量和视应力,因此仅根据拟合关系M_W=a+bM_L中b的大小就可以判断地震矩与应力降、折合能量及视应力的关系。基于量规函数LXZ得到的近震震级与能量震级更为接近,且两者在与矩震级的拟合关系M_W=a+bM_L中有相同的b,接近于0.5,这既印证了从b的大小来判断应力降与地震矩关系的论断,也说明从能量的角度来看量规函数LXZ优于量规函数GF。     

九寨沟M_S7.0地震对巴颜喀拉块体东北缘活动断裂影响的有限元模拟

在详细调研地震地质资料的基础上,构建了巴颜喀拉地块东北缘三维有限元模型。以九寨沟M_S7.0地震同震位错为荷载,模拟计算了九寨沟地震的发生对巴颜喀拉块体东北缘主要活动断裂加卸载效应的影响。模拟结果显示,九寨沟地震的发生对龙日坝断裂、虎牙断裂、青川-平武断裂西段、迭部-白龙江断裂西段和东段、临潭-宕昌断裂东段,以及处于甘青川交界危险区内的东昆仑断裂东段、塔藏断裂西段,处于六盘山南-西秦岭东危险区的西秦岭北缘断裂东段表现为库仑应力加载;对岷江断裂、塔藏断裂东段库仑应力卸载效应显著。     

基于无人机影像的九寨沟地震建筑物震害定量评估

利用2017年8月8日九寨沟7.0级地震震后获取的无人机影像,结合地面震害调查资料,分析各类建筑物震害特征,建立建筑物震害无人机遥感解译标志;选取地震灾区漳扎镇(部分区域)和荷叶寨2个区域作为研究区,进行了无人机遥感建筑物震害提取,基于遥感震害指数进行了震害定量评估,并与现场建筑物震害调查统计结果进行了比较验证。结果显示,遥感解译建筑物震害与实际震害程度相吻合,表明利用震后快速获取的高分辨率无人机影像,可以较为准确地识别建筑物震害,进而为地震灾害定量评估和应急救援辅助决策提供重要参考。     

Observational and model studies of synoptic current fluctuations in the Bohai Strait on the Chinese continental shelf

Ocean Dynamics - Three winter storms struck the Bohai and Yellow seas in succession during February 16–25, 2017. Periodic fluctuations of sea level, currents, temperature, and salinity were...     

The importance of aspect for modelling the hydrological response in a glacier catchment in Central Asia

Understanding how explicit consideration of topographic information influences hydrological model performance and upscaling in glacier dominated catchments remains underexplored. In this study, the Urumqi glacier no. 1 catchment in northwest China, with 52% of the area covered by glaciers, was selected as study site. A conceptual glacier‐hydrological model was developed and tested to systematically, simultaneously, and robustly reproduce the hydrograph, separate the discharge into contributions from glacier and nonglacier parts of the catchment, and establish estimates of the annual glacier mass balance, the annual equilibrium line altitude, and the daily catchment snow water equivalent. This was done by extending and adapting a recently proposed landscape‐based semidistributed conceptual hydrological model (FLEX‐Topo) to represent glacier and snowmelt processes. The adapted model, FLEX^G, allows to explicitly account for the influence of topography, that is, elevation and aspect, on the distribution of temperature and precipitation and thus on melt dynamics. It is shown that the model can not only reproduce long‐term runoff observations but also variations in glacier and snow cover. Furthermore, FLEX^G was successfully transferred and up‐scaled to a larger catchment exclusively by adjusting the areal proportions of elevation and aspect without the need for further calibration. This underlines the value of topographic information to meaningfully represent the dominant hydrological processes in the region and is further exacerbated by comparing the model to a model formulation that does not account for differences in aspect (FLEX^G,nA) and which, in spite of satisfactorily reproducing the observed hydrograph, does not capture the influence of spatial variability of snow and ice, which as a consequence reduces model transferability. This highlights the importance of accounting for topography and landscape heterogeneity in conceptual hydrological models in mountainous and snow‐, and glacier‐dominated regions.     

Development of the Multipurpose Timing Instrument Based on BDS

With the increasingly high requirement of clock source accuracy for seismic data servers and equipment, the development of a multipurpose timing system is urgently needed in the seismic industry. We have developed low-cost timing equipment according to the actual earthquake industry situation. This set of timing equipment can provide a unified solution to the different environment and different earthquake instruments with different timing precision demands.     

荒漠草原区风力发电场建设前后的植被变化

调查了甘肃景泰荒漠草原区一处风电场基础设施建设和运行对植被的影响。结果表明:荒漠草原区百兆瓦级风力发电场建设造成直接植被生产力损失量为6.79 g·m^-2·a^-1,间接植被生产力损失量为91.43 g·m^-2·a^-1。随着扰动程度增加,物种丰富度降低,均匀度减小。在工程运行后,经历近10 a的自然恢复,核心扰动区虽然物种单一,但植被生产力是次级扰动区的两倍以上,为间接扰动区和未扰动区的50%和33%左右;而间接扰动区植被生产力仅为未扰动区的50%。总体上,风电工程扰动对区域植被的影响,不仅在于建设期对局地群落植被生产力的完全丧失,更重要的是在运行期间对周边大面积间接影响区群落植被生产力的大幅度降低,而且这种影响是长期和持续性的。     

Variation of physical properties across the green valley for local galaxies

We selected a sample of nearby galaxies from the Sloan Digital Sky Survey Data Release 7(SDSS DR7) to investigate the variation of physical properties from the blue cloud to green valley to red sequence.The sample is limited to a narrow range in the color-stellar mass diagram. After splitting green valley galaxies into two parts—a bluer green valley(green 1) and a redder one(green 2) and three stellar mass bins,we investigate the variation of physical properties across the green valley region. Our main results are as follows:(i) The percentages of pure bulge and bulge-dominated/elliptical galaxies increase gradually from blue cloud to red sequence while the percentages of pure disk and disk-dominated/spiral galaxies decrease gradually in all stellar mass bins and different environments.(ii) With the analysis of morphological and structural parameters(e.g., concentration(C) and the stellar mass surface density within the central 1 kpc(Σ1)), red galaxies show more luminous and compact cores than both green valley and blue galaxies, while blue galaxies show the opposite behavior in all stellar mass bins.(iii) A strong negative(positive) relationship between bulge-to-total light ratio(B/T) and specific star formation rate(sSFR)(D_(4000)) is found from blue to red galaxies. Our results indicate that the growth in bulge plays an important role when the galaxies change from the blue cloud, to the green valley and to the red sequence.     

丽江2.4米望远镜的圆顶侧窗自动化控制系统

丽江2.4 m望远镜的圆顶采用方位随动和滑动式天窗的超半球结构,起初为改善因圆顶和望远镜终端电子设备引起的内外大气湍流,设计了大面积的多组机械式侧窗。但由于高平台手动操作危险、缓慢、不精确且易损坏,为实现侧窗稳定的多组自动控制,开发了基于STM32板的嵌入式圆顶侧窗自动控制系统,利用WiFi模块、串口模块和手柄实现侧窗的远程和多通道控制。同时结合气象数据、圆顶位置信息等使系统能根据气象阈值进行预警、自动开合,并尽量减小风对望远镜振动的影响。侧窗控制系统的设计可满足上层系统集成的需要。该系统稳定可靠,能满足侧窗的自主运行与人为控制。     

Calibration of the DAMPE Plastic Scintillator Detector and its on-orbit performance

The DArk Matter Particle Explorer(DAMPE) is a space-borne apparatus for detecting the highenergy cosmic-ray-like electrons, γ-rays, protons and heavy ions. The Plastic Scintillator Detector(PSD)is the top-most sub-detector of the DAMPE. The PSD is designed to measure the charge of incident highenergy particles and it also serves as a veto detector for discriminating γ-rays from charged particles. In this paper, a PSD on-orbit calibration procedure is described, which includes the five steps of pedestal, dynode correlation, response to minimum-ionizing particles, light attenuation function and energy reconstruction.A method for reconstructing the charge of incident high energy cosmic-ray particles is introduced. The detection efficiency of each PSD strip is verified to be above 99.5%; the total efficiency of the PSD for charged particles is above 99.99%.