Fe‐bearing phases in a ureilite fragment from the asteroid 2008 TC3 (= Almahata Sitta meteorites): A combined Mössbauer spectroscopy and X‐ray diffraction study

The iron‐bearing phases in a ureilite fragment (AS#051) from the Almahata Sitta meteorite are studied using Mössbauer spectroscopy, X‐ray diffraction (XRD), and electron microprobe analysis (EMPA). AS#051 has a typical ureilite texture of medium‐ to coarse‐grained silicates (olivine, orthopyroxene, and pigeonite) with minor opaques (Fe‐Ni metal, troilite, and graphite). The silicate compositions, determined by EMPA, are homogeneous: olivine (Fo_90.2), orthopyroxene (En_86.3Fs_8.6Wo_5.1), and pigeonite (En_81.6Fs_8.9Wo_9.5), and are similar to those of magnesian ureilites. The modal abundance of mineral phases was determined by Rietveld refinement of the powder XRD data. The Mössbauer spectra at 295 K and 78 K are composed of two sharp well‐defined paramagnetic doublets superimposed on a well‐resolved magnetic sextet and other weak absorption features. The two paramagnetic doublets are assigned to olivine and pyroxene (orthopyroxene and pigeonite), and the ferromagnetic sextet to kamacite (magnetic hyperfine field ≈ 33.2 T), in agreement with the XRD characterization. The Mössbauer results also show the presence of small amounts of troilite (FeS) and cohenite ([Fe,Ni,Co]₃C). Using the Mössbauer data, the relative abundance of each Fe‐bearing phase is determined and compared with the results obtained by XRD.     

Stability assessment of jointed rock slope with different crack infillings under various thermomechanical loadings

Thermoelastic deformation of rock significantly affects the stability of rock slope because thermoelastic strains may cause fracture propagation under favorable condition of failure. Rock slope stability depends on the balance between shear stress and shear resistance along the plane of weakness. Due to warming of rock slopes by heat transfer phenomena, viz. conduction and convection, considerable change in induced stresses (normal and shear) and resistance takes place which further causes instability in rock slope. In this paper, a two-dimensional finite element model has been used to simulate the stability of jointed rock slope containing crack in its upper surface. Four different cases have been simulated on the basis of infilling material (air, water, ice, water and ice) in the crack. Stability of rock slope is examined in terms of shear displacement and factor of safety for different thermal conditions of slope surface. A comparative study has been done for the four cases of infilling material in the crack. The various affecting parameters, viz. shear displacement, factor of safety, shear strength along the joint, and different surface temperature conditions, are illustrated by means of graphs. It has been found that the values of horizontal and vertical displacements are in the range of millimeters. The maximum values of horizontal and vertical displacements are 2.17 mm. Moreover, the maximum values of vertical compressive and tensile stresses are 15.4 MPa and 4.45 MPa respectively for the said four cases. According to the infilling material in the crack, the stability of the rock slope for the given geometry of slope is found in the following order: crack filled with ice < crack filled with ice and water < crack filled with water < empty crack. Validations of numerical results have been done from previous studies, and it has been found that the trends of normal stress, shear strength, and shear displacement along the joint are well matched.     

Tectonic evolution of the Aravalli orogen (NW India): an inverted Proterozoic rift basin?

The Aravalli mountain range (AMR) in the northwestern part of the Indian Peninsula consists of two main Proterozoic metasedimentary and metaigneous sequences, the Aravalli and Delhi Supergroups, respectively, which rest over the Archaean gneissic basement. A synthesis and reinterpretation of the available geological, geochronological and geophysical data, including results of own field work and geophysical interpretations pertaining to the AMR, indicate its origin as an inverted basin: rifting into granitoid basement began ca. 2.5; Ga ago with Aravalli passive rifting (ca. 2.5–2.0 Ga) and Delhi active rifting (ca. 1.9–1.6 Ga). Associated mafic igneous rocks show both continental and oceanic tholeiitic geochemistry and are comparable with Phanerozoic, rift-related magmatic products. Available data showed no conclusive evidence for oceanic lithoshere and island-arc/active margin magmatic activity in the AMR. Subsequent inversion and orogeny (Delhi orogeny, ca. 1.5-1.4 Ga) lead to complex deformation and metamorphism. Only in the western and central zones has the basement been involved in this mid-Proterozoic (Delhi) deformation, whereas it is unaffected in the eastern part, except for local shear zones mainly along the basement/cover interface. The grade of metamorphism increases from the greenschist facies in the east to the amphibolite facies in the west with local HP assemblages. These latter are explained by rapid burial and exhumation of thin and cool continental lithosphere. Subsequently, during a final, mild phase of inversion, the Vindhyan basins consisting mainly of sandstones, limestones and shales, flanking the AMR formed which are comparable to foreland basins. The tectonic evolution of the AMR is therefore interpreted as an example of a major inverted continental rift and of a Proterozoic intra-continental orogen.     

Propagation of blast waves in Roche model

A non-similarity solution for propagation of magnetogasdynamic blast waves in Roche model is obtained. The density outside the central core varies according to some inverse power of distance from the centre of explosion. The strength of the shock surface heading the disturbance as well as the total energy of the wave vary with time.     

Application of 55 multi-dimensional tectonomagmatic discrimination diagrams to Precambrian belts

Fifty-five new multi-dimensional diagrams, mostly based on log-ratio transformations, were used to decipher tectonic settings for 17 cases of Precambrian belts in Canada, the USA, Poland, Finland, Jordan, Democratic Republic of Congo and Zambia, China, and India. The results of different sets of diagrams for basic-ultrabasic, intermediate, and acid magmas were generally internally consistent. Possible reasons for some inconsistencies may be related to the use of a sample group of mixed ages because of their uncertainties, extreme element mobility caused by metamorphism especially of high-grade type, analytical data quality, different petrogenetic processes for basic to acid magmas such as mantle versus crustal origin, and some deficiencies that still exist in the multi-dimensional diagrams. To partly overcome the last problem, one new multi-dimensional diagram is proposed and used to discriminate mid-ocean ridge and oceanic plateau settings.     

A Semi-Empirical Approach for Rockfall Prediction Along the Lengpui-Aizawl Highway Mizoram,India

Geotechnical and Geological Engineering - The Lengpui-Aizawl highway in the Northeastern part of India has witnessed several rockfall events in the past decades. This is the only highway that...     

Ptychodus decurrens Agassiz (Elasmobranchii: Ptychodontidae) from the Upper Cretaceous of India

Although a very high invertebrate faunal diversity is known from the outcrops of the Ariyalur group in the Cauvery Basin, southern India, little is known about its vertebrate fauna. Recent fieldwork in the badland exposures of the Karai Formation (Upper Cenomanian-Lower Turonian) near Garudamangalam in the basin has yielded two teeth belonging to the Late Cretaceous shark Ptychodus decurrens (Ptychodontidae). The fossil record of Ptychodus decurrens from the southern continents is very poor, being known from a single Late/Middle Albian occurrence in Australia. This finding documents the first record of fossil P. decurrens in India and second from a Gondwanan landmass, and provides the first evidence of a cosmopolitan, Pangaean, distribution of the species during the Albian-Turonian and additional insights into the palaeoecology of the Cauvery Basin during the deposition of the Karai Formation.     

Epoch determination for neural network by self-organized map (SOM)

Artificial neural networks have a wide application in many areas of science and engineering and, particularly, in geotechnical problems with some degree of success due to the fact that the mechanical behavior of rocks are not salient. They are highly nonlinear, quite complex and complicated. While applying neural network in such complicated problems, epoch determination is based on hit-and-trail basis mainly. In this paper, the effect of different number of epochs is shown on the network and a method is proposed to determine the optimum number of epoch with the help of self-organized map (SOM) to avoid overtraining of the network. Data distribution is also done with the help of SOM and a statistical analysis is made to show consistency between training and testing dataset for ensuring the optimal model performance.     

Assessment of Groundwater Quality of the Central Gangetic Plain Area of India Using Geospatial and WQI Techniques

The paper presents results of research to determine the health risk of potentially toxic elements (PTEs) in soils of gold mining area in Ilesha, Southwestern Nigeria. Eighteen top soil samples were collected and analysed for PTEs using ICPMS. The pollution level in soils were assessed using pollution load index (PLI) and potential ecological risk index (PERI). The human health risk was assessed using hazard index (HI), non-carcinogenic risk index and carcinogenic risk index. All the PTEs were higher than crustal average values except Fe and follow the order Mn > Ba > Cr > Zn > Cu > Ni > Pb > Co >Fe > As > Cd. The soil samples can be classified as unpolluted to moderately polluted (0.18-1.23) and low risk (15.28-94.24) based on PLI and PERI respectively. The values of hazard Index (HI) calculated for child and adult population for all the pathways were <1 and pose no obvious non carcinogenic risk to the population except for ingestion pathway where 33% of the samples showed value >1 in child population. As, Co, Cd and Pb constituted high cancer risk in the study area with child at higher risk than adult. The Total Cancer Risk (TCR) in the study area based on all the pathways ranges between 0.19 -3.86 and 0.18-3.58 for child and adult respectively and the ingestion route seems to be the major contributor to excess lifetime cancer risk followed by the dermal pathway.