Is Prediction of Future Landslides Possible with a GIS?

This contribution explores a strategy for landslide hazard zonation inwhich layers of spatial data are used to represent typical settings inwhich given dynamic types of landslides are likely to occur. Theconcepts of assessment and prediction are defined to focus on therepresentation of future hazardous events and in particular on themyths that often provide obstacles in the application of quantitativemethods. The prediction rate curves for different applications describethe support provided by the different data layers in experiments inwhich the typical setting of hazardous events is approximated bystatistically integrating the spatial information.     

Compositional Geometry and Mass Conservation

A geometrical structure is imposed on compositional data by physical and chemical laws, principally mass conservation. Therefore, statistical or mathematical investigation of possible relations between data values and such laws must be consistent with this structure. This demands that geometrical concepts, such as points that specify both mass and composition in linear space, and lines in projective space that specify composition only, be clearly defined and consistent with mass conservation. Mass thus becomes the norm in composition space in place of the Euclidean norm of ordinary space. Coordinate transformations inconsistent with this geometry are accordingly unnatural and misleading. They are also unnecessary because correlation arising from the constant mass presents no unusual difficulty in the analysis of the underlying quadratic form.     

Hazard Zoning for Landslides Connected to Torrential Floods in the Jerte Valley (Spain) by using GIS Techniques

The Jerte Valley is anortheast-southwest tending graben located in the mountainous region of west central Spain (Spanish Central System). Mass movements have been a predominant shaping process on the Valley slopes during the Quaternary. Present day activity is characterized as either `first-time failure' (shallow debris slides and debris flows) or `reactivations' of pre-existing landslides deposits.A delineation of landslide hazard zoningwithin the Valley has been carried out by using the detailed documentation of a particular event (a debris slide and a sequel torrential flood, which occurred on the Jubaguerra stream gorge), and GIS techniques. The procedure has had four stages, which are: (1) the elaboration of a susceptibility map (spatial prediction) of landslides; (2) the elaboration of a map of `restricted susceptibility' in the particular case of slopes that are connected to streams and torrents (gorges); (3) the elaboration of a digital model which relates the altitude to the occurrence probability of those particular precipitation conditions which characterized the Jubaguerra event and (4) the combination of the probability model with the `restricted susceptibility map', to establish `critical zones' or areas which are more prone to the occurrence of phenomena that have same typology as this one.     

Preliminary Results from a New 157 nm Laser Ablation ICP-MS Instrument: New Opportunities in the Analysis of Solid Samples

Preliminary results are given from an excimer 157 nm laser ablation multiple-collector inductively coupled plasma-mass spectrometer (LA-MC-ICP-MS), used for the isotopic measurements of solid materials. Elements of geological interest with different volatilities such as Pb and U (e.g. zircon geochronology) and Cu and Zn (as examples of geochemical/biochemical tracers) were analysed. The range of ablation rates of 20-150 nm s^-1 enabled us to ablate the sample down to a depth of 45 μm for a 50 μm diameter pit. The Cu and Zn isotopic measurements gave values that were very stable with, on average, a 0.01 % standard error, comparable with that achieved in liquid mode measurements.     

Lithofacies succession of maar crater deposits in the Eifel area (Germany)

ABSTRACT Maar craters often contain exceptionally preserved fossils and maar sediments may reflect detailed environmental changes. Volcanosedimentary processes in a Middle Eocene maar crater lake are illustrated by the deposits of Eckfeld Maar in the Tertiary Hocheifel Volcanic Field (Rhenish Massif, Germany). The maar origin of the basin is evident from a circular negative gravity anomaly which indicates a low-density funnel-shaped basin filling. From the facies analysis of an Eocene (Eckfeld) and a Pleistocene (Döttingen) maar we develop a lithozone classification for the interpretation of maar sediments: syn-/post-eruptive breccias are followed by a fining-upwards sequence of lacustrine mud with coarse layers and final swamp deposits. From the facies analysis and regional geological data we reconstruct the pre- to post-eruptive history of a maar crater prior to post-Eocene uplift. These observations can be used for the interpretation of Tertiary and Quaternary maar craters that are ideal fossil and sediment traps.     

The red bed controversy revisited: shape analysis of Colorado Plateau units suggests long magnetization times

Several Triassic and earliest Jurassic sedimentary units from the Colorado Plateau region have distributions of virtual geomagnetic poles (VGPs) that are highly elongate along the path of apparent polar wander (APW). This suggests that the remanent magnetizations measured in these units were acquired over an extended period of time, possibly approaching 35 m.y., and are not precisely coeval with the stratigraphic age of the rock. Comparison with other paleomagnetic studies shows that the observed elongation is not a general attribute of the age of the rock, nor is it related to paleolatitude. The rocks that yield elongate VGP distributions are dominantly red to brown mudstones, and it is possible that their remanence is dominated by a slowly acquired chemical remanent magnetization, as suggested by Larson et al. [J. Geophys. Res. 87 (1982) 1081] and other authors. However, several superficially similar units from the Colorado Plateau have nearly circular VGP distributions. The process by which remanence is acquired in clastic sedimentary rocks merits further study.     

Layer parallel shortening in salt-detached folds: constraint on cross-section restoration

Cleavage-fissility perpendicular to bedding is a common feature in the external part of fold-and-thrust belts. Three techniques were used to determine the internal distortion in the frontal Southern Pyrenees: the analysis of strain markers such as burrows and rain drops, the measurement of fissility, and the measurement of anisotropy of magnetic susceptibility (AMS). The comparison of the three techniques showed a good fit although they differ in sensitivity to penetrative strain variations in the range of deformation values explored in the study case. On the regional scale, the values of layer parallel shortening (LPS) derived from the markers analysis are very constant and account for 16–23% of shortening. These values are two to three times larger than the shortening values calculated from the restoration of the macroscopic scale structures and indicate a good decoupling above the Cardona salt Formation. This study permitted an accurate restoration of the low-amplitude el Guix detached anticline.     

Eastern Laurentia in Rodinia: constraints from whole-rock Pb and U/Pb geochronology

Whole-rock Pb isotopic signatures and U/Pb geochronology refute a Rodinian correlation of northeastern Laurentia and proto-Andean Amazonia. According to this previously proposed model, the Labrador–Scotland–Greenland Promontory (LSGP) of northeastern Laurentia collided with the proto-Andean margin of Amazonia, at the Arica Embayment, during the Grenville/Sunsás Orogeny (ca. 1.0 Ga). Links between the two margins were based upon the correlation of the LSGP with Arequipa-Antofalla Basement (AAB), a Proterozoic block along the proto-Andean margin of Amazonia adjacent to the Arica Embayment. Specifically, similarities in 1.8–1.0 Ga basement rocks in both regions suggested that the AAB was originally a piece of the LSGP. Furthermore, similarities in unique, post-collisional, but pre-rift, glacial sedimentary sequences also supported a link between the AAB and LSGP.Tests of these apparent similarities fail to support correlation of the AAB and the LSGP and, thus, eliminate a direct link between northeastern Laurentia and southwestern Amazonia in Rodinia. However, Pb isotopic compositions and U/Pb geochronology provide the basis for two new correlations, namely, (1) the ca. 1.3–1.0 Ga basement in the central and southern Appalachians may be an allochthonous block that was transferred to Laurentia from Amazonia at ca. 1.0 Ga, and (2) an allochthonous AAB may be a piece of the Kalahari Craton that was transferred to Amazonia at ca. 1.0 Ga. Based on these new correlations and a previously proposed Grenvillian connection between southern Laurentia (Llano) and Kalahari, we propose that Amazonia may have collided with a contiguous southeastern Laurentia/Kalahari margin at ca. 1.0 Ga.     

Timing of deformation in the Norseman-Wiluna Belt, Yilgarn Craton, Western Australia

Establishing relative and absolute time frameworks for the sedimentary, magmatic, tectonic and gold mineralisation events in the Norseman-Wiluna Belt of the Archean Yilgarn Craton of Western Australia, has long been the main aim of research efforts. Recently published constraints on the timing of sedimentation and absolute granite ages have emphasized the shortcomings of the established rationale used for interpreting the timing of deformation events. In this paper the assumptions underlying this rationale are scrutinized, and it is shown that they are the source of significant misinterpretations. A revised time chart for the deformation events of the belt is established. The first shortening phase to affect the belt, D₁, was preceded by an extensional event D_1e and accompanied by a change from volcanic-dominated to plutonic-dominated magmatism at approximately 2685–2675 Ma. Later extension (D_2e) controlled deposition of the ca 2655 Ma Kurrawang Sequence and was followed by D₂, a major shortening event, which folded this sequence. D₂ must therefore have started after 2655 Ma—at least 20 Ma later than previously thought and after the voluminous 2670–2655 Ma high-Ca granite intrusion. Younger transcurrent deformation, D₃–D₄, waned at around 2630 Ma, suggesting that the crustal shortening deformation cycle D₂–D₄ lasted approximately 20–30 Ma, contemporaneous with low-volume 2650–2630 Ma low-Ca granites and alkaline intrusions. Time constraints on gold deposits suggest a late mineralisation event between 2640–2630 Ma. Thus, D₂–D₄ deformation cycle and late felsic magmatism define a 20–30 Ma long tectonothermal event, which culminated with gold mineralisation. The finding that D₂ folding took place after voluminous high-Ca granite intrusion led to research into the role of competent bodies during folding by means of numerical models. Results suggest that buoyancy-driven doming of pre-tectonic competent bodies trigger growth of antiforms, whereas non-buoyant, competent granite bodies trigger growth of synforms. The conspicuous presence of pre-folding granites in the cores of anticlines may be a result from active buoyancy doming during folding.     

Measurement and interpretation of molecular-level forces of interaction between the siderophore azotobactin and mineral surfaces

The forces of interaction were measured between the siderophore azotobactin and the minerals goethite (α-FeOOH) and diaspore (α-AlOOH) in aqueous solution using force microscopy. Azotobactin, a pyoverdin-type siderophore, was covalently linked to a hydrazide terminated atomic force microscope tip using a standard active ester protein coupling technique. Upon contact with each mineral surface, the adhesion force between azotobactin and goethite was two to three times the value observed for the isostructural Al-equivalent diaspore. The affinity for the solid iron oxide surface reflected in the force measurements correlates with the specificity of azotobactin for aqueous ferric iron. Further, the adhesion force between azotobactin and goethite significantly decreases (4 nN to 2 nN) when small amounts of soluble iron (0.1 μM FeCl₃ · 6H₂O) are added to the system at pH 3.5 suggesting a significant specific interaction between the chelating reactive center of azotobactin and the mineral surface. Changes in the force signature with pH and ionic strength were fairly predictable when considering mineral solubility, the charge character of the mineral surfaces, the molecular structure of azotobactin, and the intervening solution. For example, azotobactin-goethite adhesion values were consistently smaller at pH 3.5 relative to the forces at pH 7. At the lower pH, the large number of protons and the increase in the mineral solubility provides additional electron acceptors (e.g., H⁺ and Fe³⁺(aq)) that are free to compete for the basic oxygen chelating sites in the azotobactin structure. It is believed that this competition disrupts siderophore affinity for the surface resulting in decreased adhesion values.