Constitutive and numerical framework for modeling joints and faults in rock

A three‐dimensional constitutive model for joints is described that incorporates nonlinear elasticity based on volumetric elastic strain, and plasticity for both compaction and shear with emphasis on compaction. The formulation is general in the sense that alternative specific functional forms and evolution equations can be easily incorporated. A corresponding numerical structure based on finite elements is provided so that a joint width can vary from a fraction of an element size to a width that occupies several elements. The latter case is particularly appropriate for modeling a fault, which is considered simply to be a joint with large width. For small joint widths, the requisite equilibrium and kinematic requirements within an element are satisfied numerically. The result is that if the constitutive equation for either the joint or the rock is changed, the numerical framework remains unchanged. A unique aspect of the general formulation is the capability to handle either pre‐existing gaps or the formation of gaps. Representative stress–strain plots are given to illustrate both the features of the model and the effects of changes in values of material parameters. Copyright © 2015 John Wiley & Sons, Ltd.     

Framing in geographical analysis of environmental conflicts: Theory, methodology and three case studies

When applied to environmental concerns, framing offers a rigorous conceptual and analytic approach with potentially practical significance for dealing with complex issues relevant to geography. The purpose of this article is to introduce framing concepts, typology and modes of analysis to address issues which geographers commonly treat: disputes over land ownership and uses, competition for water resources, cultural clashes over control of territory and resources and the impact of spatial patterns and structures when siting noxious sites. Framing analysis is applied to three cases of environmental conflict in Israel and, more generally, for understanding conflicts revolving around the management of human habitats in relation to the physical environment.     

Calcium carbonate dissolution in deep sea sediments: reconciling microelectrode, pore water and benthic flux chamber results

We report the benthic fluxes of O₂, titration alkalinity (TA), Ca²⁺, NO₃⁻, PO₄³⁻, and Si(OH)₄ from in situ benthic flux chamber incubations on the Ceara Rise and Cape Verde Plateau and compare them to previously published results. We find within analytical uncertainty that the TA flux is twice the calcium flux, suggesting that dissolution/precipitation of CaCO₃ is the principal mechanism controlling benthic TA and Ca²⁺ fluxes. At sites where the sediments contain significant (>35%) CaCO₃ and the overlying waters are supersaturated with respect to CaCO₃, the ratios of the total dissolution rate to the remineralization rate are significantly less than at all other study sites. We propose that these observations can be explained by precipitation of fresh CaCO₃ at the supersaturated sediment surface followed by redissolution deeper in the sediments because of metabolically-produced CO₂. A numerical simulation is presented to demonstrate the feasibility of this explanation. In addition, surface exchange reactions in high-CaCO₃ sediments coupled with high rates of particle mixing may also impact rates of metabolic dissolution and depress chamber-derived estimates of carbonate alkalinity and calcium benthic fluxes. These results suggest that at supersaturated, high CaCO₃ locations, previous models of sediment diagenesis may have overestimated the impact of metabolic dissolution on the preservation of CaCO₃ deposited on the sea floor.     

Uranium and Thorium Concentration and Isotopic Composition in Five Glass (BHVO‐2G,BCR‐2G,NKT‐1G,T1‐G,ATHO‐G) and Two Powder (BHVO‐2, BCR‐2) Reference Materials

Here we report uranium and thorium isotopic ratios and elemental concentrations measured in solid reference materials from the USGS (BHVO‐2G, BCR‐2G, NKT‐1G), as well as those from the MPI‐DING series (T1‐G, ATHO‐G). Specifically created for microanalysis, these naturally‐sourced glasses were fused from rock powders. They cover a range of compositions, elemental concentrations and expected isotopic ratios. The U‐Th isotopic ratios of two powdered source materials (BCR‐2, BHVO‐2) were also characterised. These new measurements via multi‐collector thermal ionisation mass spectrometry and multi‐collector inductively coupled plasma‐mass spectrometry can now be used to assess the relative performance of techniques and facilitate comparison of U‐Th data amongst laboratories in the geoscience community for in situ and bulk analyses.     

GLACIAL GEOMORPHOLOGY OF THE WHITE MOUNTAINS,CALIFORNIA AND NEVADA: ESTABLISHMENT OF A GLACIAL CHRONOLOGY

The White Mountains, astride the California-Nevada stateline, are the highest and westernmost of the Great Basin ranges. This range was extensively glaciated during the Quaternary Period. Glacial landforms and scattered erratics were identified in the field using primarily morpho-and lithostratigraphic criteria, and mapped on aerial photographs and topographic maps. Topographic characteristics of the glacial deposits were analyzed using standard statistical procedures. A sequence of glacial deposits was identified in terms of six glacial stages, these glaciations named according to type site, and relative ages inferred. With the exception of perched Stage I (early) deposits along the range crest, reconstructed equilibrium-line altitudes and elevation of the glacier termini increase to the present, with glacier length and inferred size decreasing through time. Preliminary data suggest that weathering and pedogenesis are also progressive, though environmental gradients mask some of these distinctions between deposits. It is hypothesized that the White Mountains have a similar glacial chronology to the adjacent Sierra Nevada, but that with the intensification of the Sierran rainshadow during the Quaternary, the extent of glaciation in the White Mountains apparently decreased through time owing to regional tectonic uplift. This had led to the preservation of a more complete sequence of glacial deposits than in the Sierra Nevada, making the delineation of multiple mid-Quaternary events possible in many valleys. Further radiometric and chronometric dating of these deposits is in progress. [Key words: Glaciation, Quaternary, glacial geomorphology, White Mountains, California, Nevada.     

Evidence of microbially mediated arsenic mobilization from sediments of the Aquia aquifer, Maryland, USA

Sediments from the Aquia aquifer in coastal Maryland were collected as part of a larger study of As in the Aquia groundwater flow system where As concentration are reported to reach levels as high as 1072 nmol kg⁻¹, (i.e., ∼80 μg/L). To test whether As release is microbially mediated by reductive dissolution of Fe(III) oxides/oxyhydroxides within the aquifer sediments, the Aquia aquifer sediment samples were employed in a series of microcosm experiments. The microcosm experiments consisted of sterilized serum bottles prepared with aquifer sediments and sterilized (i.e., autoclaved), artificial groundwater using four experimental conditions and one control condition. The four experimental conditions included the following scenarios: (1) aerobic; (2) anaerobic; (3) anaerobic + acetate; and (4) anaerobic + acetate + AQDS (anthraquinone-2,6-disulfonic acid). AQDS acts as an electron shuttle. The control condition contained sterilized aquifer sediments kept under anaerobic conditions with an addition of AQDS. Over the course of the 27 day microcosm experiments, dissolved As in the unamended (aerobic and anaerobic) microcosms remained constant at around ∼28 nmol kg⁻¹ (2 μg/L). With the addition of acetate, the amount of As released to the solution approximately doubled reaching ∼51 nmol kg⁻¹ (3.8 μg/L). For microcosm experiments amended with acetate and AQDS, the dissolved As concentrations exceeded 75 nmol kg⁻¹ (5.6 μg/L). The As concentrations in the acetate and acetate + AQDS amended microcosms are of similar orders of magnitude to As concentrations in groundwaters from the aquifer sediment sampling site (127-170 nmol kg⁻¹). Arsenic concentrations in the sterilized control experiments were generally less than 15 nmol kg⁻¹ (1.1 μg/L), which is interpreted to be the amount of As released from Aquia aquifer sediments owing to abiotic, surface exchange processes. Iron concentrations released to solution in each of the microcosm experiments were higher and more variable than the As concentrations, but generally exhibited similar trends to the As concentrations. Specifically, the acetate and acetate + AQDS amended microcosm typically exhibited the highest Fe concentrations (up to 1725 and 6566 nmol kg⁻¹, respectively). The increase in both As and Fe in the artificial groundwater solutions in these amended microcosm experiments strongly suggests that microbes within the Aquia aquifer sediments mobilize As from the sediment substrate to the groundwaters via Fe(III) reduction.     

Spatial Patterns in Water Quality Associated with Submersed Plant Beds

This study describes the influence of submersed plant beds on spatial distributions of key water quality variables. An on-board flow-through water sampling system was used to investigate patterns in turbidity, chlorophyll-a, temperature, dissolved oxygen, and pH across a robust stand of the submersed plant Stuckenia pectinata. Spatially interpolated maps show that water quality conditions were significantly altered within this plant bed, especially during months of peak biomass, and that reduction of suspended particles focused at the bed’s edge. Comparison with a suite of submersed plant beds indicated that patterns were related to canopy height, shoot density, and cross-shore bed width. Wide and dense stands with tall canopies showed reduced turbidity and increased light penetration, while smaller sparser beds often showed elevated within-bed turbidity. These results suggest that bed effects on water quality conditions vary seasonally with plant canopy architecture and bed size, providing tentative guidelines for restoring self-sustaining beds.     

Soil moisture variability and scale-dependency of nonlinear parameterizations in coupled land–atmosphere models

Many of the relationships used in coupled land–atmosphere models to describe interactions between the land surface and the atmosphere have been empirically parameterized and thus are inherently dependent on the observational scale for which they were derived and tested. However, they are often applied at scales quite different than the ones they were intended for due to practical necessity. In this paper, a study is presented on the scale-dependency of parameterizations which are nonlinear functions of variables exhibiting considerable spatial variability across a wide range of scales. For illustration purposes, we focus on parameterizations which are explicit nonlinear functions of soil moisture. We use data from the 1997 Southern Great Plains Hydrology Experiment (SGP97) to quantify the spatial variability of soil moisture as a function of scale. By assuming that a parameterization keeps its general form the same over a range of scales, we quantify how the values of its parameters should change with scale in order to preserve the spatially averaged predicted fluxes at any scale of interest. The findings of this study illustrate that if modifications are not made to nonlinear parameterizations to account for the mismatch of scales between optimization and application, then significant systematic biases may result in model-predicted water and energy fluxes.     

Effects of stem density upon sediment retention by salt marsh cord grass,Spartina alterniflora loisel

A laboratory experiment was conducted to determine whether retention of waterborne sand by salt marsh cordgrass, Spartina alterniflora Loisel, is directly related to the number of stems per unit area. Waves generated in a trough washed over a sloping beach planted with S. alterniflora sprigs: a range of stem densities (0–108 stems/m²) was examined in separate trials. The amount of sand accumulated after 60 waves is a positive nonlinear function of stem density. The greatest accretion coincided with the highest stem density tested. Shape of the beach profile was also strongly influenced by the number of stems per m².