三角网格模型剖分方法的研究与应用

数值波场正演在地震学和勘探地球物理学领域正得到越来越广泛的应用,用一个好的方法来建立一个复杂的地质模型则显得尤为关键。三角网格模型相对于层状模型和矩形网格模型在反映地质界面形态、三角网格剖分个数调节及射线追踪速度等方面具有明显优势。利用三角网格剖分的建模方法,在VC2008编程环境下实现了复杂地质模型的描述。通过对复杂模型的建模测试,表明采用三角网格剖分方法,可解决以下模型难题：①对复杂模型界面的描述;②对复杂逆断层的描述;③对封闭块体的描述;④对模型弹性参数进行描述。     

The formation of porphyry copper deposits

Copper is a moderately incompatible chalcophile element. Its behavior is strongly controlled by sulfides. The speciation of sulfur is controlled by oxygen fugacity. Therefore, porphyry Cu deposits are usually oxidized (with oxygen fugacities > ΔFMQ +2) (Mungall 2002; Sun et al. 2015). The problem is that while most of the magmas at convergent margins are highly oxidized, porphyry Cu deposits are very rare, suggesting that high oxygen fugacity alone is not sufficient. Partial melting of mantle peridotite even at very high oxygen fugacities forms arc magmas with initial Cu contents too low to form porphyry Cu deposits directly (Lee et al. 2012; Wilkinson 2013). Here we show that partial melting of subducted young oceanic slabs at high oxygen fugacity (>ΔFMQ +2) may form magmas with initial Cu contents up to >500 ppm, favorable for porphyry mineralization. Pre-enrichment of Cu through sulfide saturation and accumulation is not necessarily beneficial to porphyry Cu mineralization. In contrast, re-melting of porphyritic hydrothermal sulfide associated with iron oxides may have major contributions to porphyry deposits. Thick overriding continental crust reduces the “leakage” of hydrothermal fluids, thereby promoting porphyry mineralization. Nevertheless, it is also more difficult for ore forming fluids to penetrate the thick continental crust to reach the depths of 2–4 km where porphyry deposits form.     

Heavy metal pollution in sediments of a typical mariculture zone in South China

The heavy metal inventory and the ecological risk of the estuarine sediments in Hailing Bay, an important maricultural zone along the southern coast of China, were investigated. Results show that the surface sediments were mainly polluted by As (2.17-20.34 mg/kg), Ni (1.37-42.50mg/kg), Cu (1.21-58.84 mg/kg) and Zn (11.69-219.22 mg/kg). Furthermore, the aquafarming zone was significantly more polluted than the non-aquafarming zone, and cluster analysis suggested additional sources of heavy metal input in the aquafarming zone. As, Cr, Cu, Ni, Pb and Zn were mainly present in the non-bioavailable residual form in the surface sediments, whereas Cd was predominantly in the highly mobile acid soluble and reducible fractions. The ecological risk of the polluted sediments stemmed mainly from Cd, and from As, Cu and Pb to less degrees. The highest potential risks occurred near the aquaculture base, indicating the need to control heavy metal inputs from aquafarming activities.     

Sedimentological analysis of two drill cores through the crater moat‐filling breccia,Flynn Creek impact structure,Tennessee

Sedimentological (line‐logging) analysis of two drill cores, FC77‐3 and FC67‐3, situated, respectively, in the northwestern and southeastern quadrants of the Flynn Creek impact structure's crater‐moat area reveals that the ~27 m thick crater moat‐filling breccia consists of three subequal parts. These parts, which were deposited during early modification stage of this marine‐target impact structure, are distinguished on the basis of vertical trends in sorting, grain size, and counts of clasts per meter in comparison with other well‐known marine‐target impact structures, namely Lockne, Tvären, and Chesapeake Bay. The lower part is interpreted to represent mainly slump deposits, and the middle part is interpreted to represent a stage intermediate between slump and marine resurge, that is, a traction flow driven by overriding suspension flow. The upper part (size graded, and relatively well sorted and fine grained) is interpreted to represent marine resurge flow only. The upper part is capped by a relatively thin and relatively fine‐grained calcarenite to calcisiltite deposit.     

Mass-front velocity of dry granular flows influenced by the angle of the slope to the runout plane and particle size gradation

The mass-front velocities of granular flows results from the joint action of particle size gradations and the underlying surfaces.However,because of the complexity of friction during flow movement,details such as the slope-toe impedance effects and momentum-transfer mechanisms have not been completely explained by theoretical analyses,numerical simulations,or field investigations.To study the mass-front velocity of dry granular flows influenced by the angle of the slope to the runout plane and particle size gradations we conducted model experiments that recorded the motion of rapid and long-runout rockslides or avalanches.Flume tests were conducted using slope angles of 25°,35°,45°,and 55° and three particle size gradations.The resulting mass-front motions consisted of three stages:acceleration,velocity maintenance,and deceleration.The existing methods of velocity prediction could not explain the slowing effect of the slope toe or the momentum-transfer steady velocity stage.When the slope angle increased from 25° to 55°,the mass-front velocities dropped significantly to between 44.4% and59.6% of the peak velocities and energy lossesincreased from 69.1% to 83.7% of the initial,respectively.The velocity maintenance stages occurred after the slope-toe and mass-front velocity fluctuations.During this stage,travel distances increased as the angles increased,but the average velocity was greatest at 45°.At a slope angle of 45°,as the median particle size increased,energy loss around the slope toe decreased,the efficiency of momentum transfer increased,and the distance of the velocity maintenance stage increased.We presented an improved average velocity formula for granular flow and a geometrical model of the energy along the flow line.     

A 1972 prediction of Uranian rings based on the Alfvén critical velocity effect

It is speculated from an empirical point of view that there may be yet unobserved matter around the planet Uranus inside the orbit of Miranda. Such matter, if any, is likely to be emplaced in the form of rings.In December, 1972, this paper — exactly as it is presented here, but with the title On the Posibility of Existence of a Ring of Uranus-was submitted to another scientific journal in the relevant field and was rejected. After the discovery of the Uranian rings, the same journal was requested to reopen the question of publication. This was done, and the paper was again rejected. The author has providedThe Moon and the Planets with proof of the original submission.Paper dedicated to Professor Hannes Alfvén on the occasion of his 70th birthday, 30 May 1978.     

In situ Raman observation of the crystallization in NaNO3–Na2SO4–H2O solution droplets

Several double salts have been detected in building materials and most of these salts are incongruently soluble compounds. In contrast to single salts, however, no systematic investigations of the crystallization behavior and deleterious effects of incongruently soluble double salts exist. To assess the damage potential of these salts, a systematic investigation of their highly complex behavior is desirable. This paper deals with the crystallization behavior of various solids in the ternary mixed NaNO₃–Na₂SO₄ system including the formation of the double salt darapskite, Na₃NO₃SO₄·H₂O. The crystallization sequence during droplet evaporation experiments at room conditions was determined using Raman and polarization microscopy. The basic idea of this research is to use deviations of the crystallization sequence of a salt or a mixed salt solution from the equilibrium pathway as an indicator to detect the degree of supersaturation. The observed crystallization pathway includes the formation of the metastable phases Na₂SO₄(III), Na₂SO₄(V) and darapskite. The experimental observations are discussed on the basis of the NaNO₃–Na₂SO₄–H₂O phase diagram and the results provide evidence for crystal growth from highly supersaturated solutions in both systems. If the crystals growing under these conditions are confined, these supersaturations result in substantial crystallization pressures.     

Caledonian Low-Temperature Granulite-Facies Metamorphism in the West Kunlun Orogenic Belt—SHRIMP Chronological Evidence from Zircon

The West Kunlun orogenic belt is located at the conjunction of the paleo-Asian tectonic system and the Tethys tectonic system. Petrological and mineralogical studies of the Early Cambrian metamorphic surface crust in this region have shown that in case the metamorphism reached low-temperature granulate facies, the typical mineral assemblage is biotite-garnet-silimanite-K feldspar-plagioclase-quartz. The peak metamorphic temperatures are within the range of 720–740°C and the pressure is 0.6 GPa ±. Three types of metamorphic zircon have been detected in the metamorphic rocks: the complex inclusion-bearing type ; the early relic zircon inclusion-bearing type; and the inclusion-free type. SHRIMP age determination of these three types of metamorphic zircon have revealed that these zircons were formed principally during 400–460 Ma, indicating that pre-Cambrian metamorphic surface crust rocks underwent low-temperature granulite facies metamorphism during the Caledonian. In combination with the geological characteristics of this region, it is considered that when the oceanic basin was closed, there occurred intense intracontinental subduction (type A), bringing part of the Early Cambrian metamorphic basement in this region downwards to the lower crust. Meanwhile, there were accompanied with tectonic deformation at deep levels and medium- to high-grade metamorphism. This study provided important chronological and mineralogical evidence for the exploration of the evolutionary mechanism and process of the West Kunlun Early Paleozoic. Part of the results from the research project “ Research on the West Kunlun pre-Cambrian tectonic events” under the program “ Research on the important geological problems of China’ s pre-Cambrian” (No. 200113900070) sponsored by the China National Geological Surveying Bureau.     

现代浮游有孔虫对南海西南部上升流的响应

现代夏季风系统导致了南海西南部（越南岸外）上升流的发育,但浮游有孔虫对夏季上升流的响应如何尚缺乏实测资料,这不利于准确地利用有孔虫来重建古上升流的活动进而反演过去夏季风的强度变化。本研究利用2014年4月14日至11月1日布放于南海西南部夏季上升流区的时间序列沉积物捕获器材料,详细鉴定并定量统计了其所含浮游有孔虫类型。通过分析样品中浮游有孔虫各属种的通量和百分含量变化,结合区域气候环境资料,探讨南海西南部夏季上升流区浮游有孔虫对夏季风的响应,为古上升流与夏季风研究提供现代依据。研究结果表明初级生产力是控制上升流区浮游有孔虫通量变化的首要因素,喜营养种在上升流发育期增多而寡营养种含量下降。因此高表层生产力指示种,如Neogloboquadrina dutertrei可能是追溯南海西南部夏季上升流变化最可靠的指标。

     

从中下三叠统膏盐特征看中下扬子早印支运动

中下扬子早 中三叠世膏盐层是对早印支运动的沉积响应,本文从膏盐的成因、中下扬子膏盐层位的差异、沉积环境的变迁、膏盐的厚度变化和产状特征、沉积中心和沉降中心的分布等方面,分析早印支运动的表现形式。中下扬子早 中三叠世依次出现陆棚台地（碳酸盐岩）、潟湖—潮坪（白云岩与膏盐）和滨海（碎屑岩）,这种大规模海退,正是早印支运动表现为构造抬升的结果。抬升过程中,残留海水在炎热干燥的气候条件下蒸发形成膏盐层,而中扬子的膏盐层位比下扬子低,据此推测中扬子先于下扬子与华北板块碰撞而抬升。平面上,现今构造格局（主要由中印支—早燕山运动形成复向斜、复背斜和推覆构造）的坳陷区主要为白云岩与（硬）石膏互层或石膏夹少量白云岩或云质石膏,膏盐层厚度大,现今构造的隆坳过渡区主要为石膏假晶、含膏云岩、石膏质白云岩、白云岩夹石膏等,膏盐层厚度小,而膏盐的厚度和产状与沉积时的水深和地势直接相关; 另外,地层等厚图显示膏盐层主要分布于当时的沉降中心。这些沉积特征显示膏盐沉积时的地势与现今隆坳相间的构造地貌存在一定程度的吻合,说明膏盐沉积时的地层已经发生了轻微的褶皱变形（未见角度不整合和地层缺失）。