三叠纪牙形石的古环境与古地理意义

牙形石广泛分布于寒武纪至三叠纪的海洋里。三叠纪牙形石的种类、形态、大小和产出频率受海水盐度、深度、温度和水动力条件等因素控制，不同的牙形石生态特征即牙形石相反映不同的沉积环境，所以，根据三叠纪牙形石相和牙形石特征属种的丰度，不但可区分三叠纪不同的沉积相区（台地相区、台地边缘相区、盆地相区），恢复三叠纪古地理面貌，而且可划分出牙形石生物地理区。中国早三叠世牙形石归属特提斯生物大区亚洲生物省，并可进一步划分出两个生物亚省和若干生态区。     

冰激直立腿海洋平台疲劳寿命分析

由于渤海特殊环境条件与油藏分布决定了该海域导管架油气平台属于典型的柔性抗冰结构。多年现场观测发现,该类结构存在显著的冰激振动现象。冰振不仅能激起较大的甲板加速度响应,还会引起明显的导管架管节点交变应力。在结构设计与安全保障中进行疲劳分析及寿命估计是必要的。对于直立腿抗冰结构,精确的冰激疲劳寿命计算方法还不成熟。基于多年的现场监测,首先分析了冰与直立腿抗冰结构相互作用过程;其次,提出了冰激直立腿平台的疲劳寿命分析流程;最后,选取渤海某典型直立腿平台,利用ANSYS数值模拟,对比了稳态冰力和随机冰力下结构的疲劳损伤,进而计算出疲劳寿命。本研究为寒区柔性结构抗冰设计与安全保障提供了理论基础。     

Planar deformation features in quartz from impact‐produced polymict breccia of the Xiuyan crater,China

Abstract– The 1.8 km‐diameter Xiuyan crater is an impact structure in northeastern China, exposed in a Proterozoic metamorphic rock complex. The major rocks of the crater are composed of granulite, hornblendite, gneiss, tremolite marble, and marble. The bottom at the center of the crater covers about 100 m thick lacustrine sediments underlain by 188 m thick crater‐fill breccia. A layer of polymict breccia composed of clasts of granulite, gneiss, hornblendite, and fragments of glass as well as clastic matrix, occurs near the base, in the depth interval from 260 to 295 m. An investigation in quartz from the polymict breccia in the crater‐fill units reveals abundant planar deformation features (PDFs). Quartz with multiple sets of PDFs is found in clasts of granulite that consist of mainly quartz and feldspar, and in fine‐grained matrix of the impact‐produced polymict breccia. A universal stage was used to measure the orientation of PDFs in 70 grains of quartz from five thin sections made from the clasts of granulite of polymict breccia recovered at the depth of 290 m. Forty‐four percent of the quartz grains contain three sets of PDFs, and another 40% contain two sets of PDFs. The most abundant PDFs are rhombohedron forms of , , and with frequency of 33.5, 22.3, and 9.6%, respectively. A predominant PDF form of in quartz suggests a shock pressure >20 GPa. The occurrence of PDFs in quartz from the polymict breccia provides crucial evidence for shock metamorphism of target rocks and confirms the impact origin of this crater, which thus appears to be the first confirmed impact crater in China.     

Natural occurrence of reidite in the Xiuyan crater of China

The high‐pressure minerals of reidite and coesite have been identified in the moderately shock‐metamorphosed gneiss (shock stage II, 35–45 GPa) and the strongly shock‐metamorphosed gneiss (shock stage III, 45–55 GPa), respectively, from the polymict breccias of the Xiuyan crater, a simple impact structure 1.8 km in diameter in China. Reidite in the shock stage II gneiss displays lamellar textures developed in parental grains of zircon. The phase transformation of zircon to reidite likely corresponds to a martensitic mechanism. No coesite is found in the reidite‐bearing gneiss. The shock stage III gneiss contains abundant coesite, but no reidite is identified in the rock. Coesite occurs as acicular, dendritic, and spherulitic crystals characteristic of crystallization from shock‐produced silica melt. Zircon in the rock is mostly recrystallized. The postshock temperature in the shock stage III gneiss is too high for the preservation of reidite, whereas reidite survives in the shock stage II gneiss because of relatively low postshock temperature. Reidite does not occur together with coesite because of difference in shock‐induced temperature between the shock stage II gneiss and the shock stage III gneiss.     

海上风电吸力基础在分层土中的沉贯特性研究综述

吸力基础与海洋工程大直径钢桩相比,具有成本低、安装周期短、对环境影响小、不受海况影响及可回收再利用等优点,近年来在海上风电工程中得到推广应用。吸力基础沉贯至海床预定位置,是其发挥承载力和确保服役稳定性的前提。海床地基土体常以分层土形式分布,且各层土体强度、压缩性和渗透性等存在显著差别,导致吸力基础吸力沉贯机理非常复杂。明确吸力基础在分层土中沉贯特性,有助于指导吸力基础在海上风电工程中的推广应用。对目前吸力基础在分层土中沉贯特性研究进行综述和总结,归纳了其沉贯机理研究进展,并对影响吸力基础在分层土中沉贯因素进行了分析;提出了分层土中吸力基础沉贯的研究方向和改进的沉贯方法。     

青藏高原东北缘瑞利面波成像：射线理论与程函方程结果的比较

青藏高原东北缘是青藏高原隆升的前缘地带,其构造变形特征一直是研究的热点。前人在该区域进行过面波成像研究,但不同结果存在较明显的差异,可能与不同成像方法的分辨率有关,此次研究分别使用基于射线的方法和基于程函方程的方法进行了瑞利波相速度成像。笔者对比了20 s、30 s和60 s的成像结果,两种方法的结果表现出相似的速度特征。总体的速度特征与研究区域的主要构造单元分布相吻合,青藏高原东北缘表现出低速异常,鄂尔多斯块体表现出高速异常。在银川河套地堑,基于程函方程的成像在20 s和30 s得到更明显的低速异常,低速异常体的分布与地堑的轮廓吻合更好,说明基于程函方程的方法对数据利用更充分。     

利用接收函数方法研究青藏高原东南部地壳结构

青藏高原东南部作为板块碰撞的前缘地带一直是地球科学研究的热点,为了揭示碰撞前缘地带地壳结构特征,作者 利用布设在中国青藏高原东南部的38个宽频带流动台站记录的2487条远震P波接收函数,采用接收函数CCP叠加（共转换点 叠加）和H-κ叠加两种方法获得了研究区域详细的地壳厚度图像和泊松比值。研究结果显示：两种方法获得的地壳厚度特征 具有较好的一致性;青藏高原东南部地壳厚度存在明显的东西差异和南北差异;喜马拉雅构造区内莫霍面深度变化较大, 介于65~80 km之间;拉萨地体内莫霍面深度介于72~80 km之间;雅鲁藏布缝合带两侧地壳厚度突变,缝合带北侧和南侧地 壳厚度相差约8 km。研究区域平均泊松比值较小,为0.24,和大多数造山带泊松比偏低的特征类似。研究区域中下地壳广 泛存在强转换界面,该界面可能对应中下地壳高速层的上界面,埋深40~70 km,表明壳内发生深熔或部分熔融作用,导致 壳内发生重力分异,在中下地壳形成了高速薄层。     

利用P波S波相结合的逆时偏移方法监测微地震群

微地震定位是油气资源开采中评估水力压裂质量和评估矿山地震和水库地震安全的重要手段。但是,采用地震震相 到时定位的方法很难对具有相近到时的微地震事件群精确定位地震。本文尝试用P波和S波结合的逆时偏移方法对具有相 近到时的微地震定位。先用绝对振幅记录做逆时偏移,获得P波和S波以及P波与S波结合的综合波场,再采用波前在震源 位置成像前后的汇聚到散射的转换过程作为成像条件,提取震源位置和发震时刻。用数值模拟生成具有相近到时的微地震 群,然后用该方法定位微地震。结果表明该方法可以有效提取各个震源位置和发震时刻。     

辽河口海冰压缩强度基本特性分析

海冰的压缩强度是海冰最主要的力学特性.针对辽河口附近海域海冰的压缩强度指标,2014~2015年冬季于辽河口附近采样并进行室内测试.内容包括单轴压缩强度实验、侧限压缩强度实验、变尺寸压缩强度测试.实验表明辽河口海冰压缩强度受应变速率、卤水体积影响显著.侧限压缩实验要比单轴压缩实验所得结果略大.不同高宽比的试样在相同应变速率的前提下压缩强度变化不明显,尺寸影响不显著.     

An intelligent agent based on virtual geographic environment system

On the basis of previous work, this paper designs an intelligent agent based on virtual geographic environment (VGE) system that is characterized by huge data, rapid computation, multi-user, multi-thread and intelligence and issues challenges to traditional GIS models and algorithms. The new advances in software and hardware technology lay a reliable basis for system design, development and application.