Prediction of overland flow and seepage zones associated with the interaction of multiple infiltration devices (cascading infiltration devices)

Infiltration devices are traditionally evaluated as standalone entities that do not interact with each other. A model is outlined that will allow interactions between proposed infiltration devices to be predicted prior to a development commencing. The model allows prediction of seepage into downslope devices and the assessment of the locations where the combined ground‐water mound will reach the surface and result in overland flow. The volume of overland flow discharged by the seepage zone may exceed the overland and piped flow received by the infiltration devices. Copyright © 2007 John Wiley & Sons, Ltd.     

Tropical cyclone activity and western North Atlantic stratification over the last millennium: a comparative review with viable connections

Tropical cyclones (TC) are recognized to modify the thermal structure of the upper ocean through the process of vertical mixing. Assessing the role this mixing plays in the overall stratification of the upper ocean is difficult, due to the relatively short and incomplete instrumental record. Proxy records for both TC landfalls and oceanographic stratification are preserved within the geological record and provide insight for how past changes in TC‐induced mixing have potentially affected water column structure prior to the instrumental record. Here we provide the first comparison between previously published paleo‐reconstructions of vertical ocean density and tropical cyclone activity from the western North Atlantic. A prominent lull in TC activity has been observed prior to approximately 1700 CE that extends back several centuries. This interval of low TC activity is shown to be concurrent with the timing of increased ocean stratification near Great Bahama Bank, potentially due in part to reduced TC‐induced mixing. To test whether this relationship is feasible, we present numerical results from a coarse‐resolution ocean general circulation model experiment isolating the effect of TC surface wind forcing on the upper ocean. An anomaly of roughly 0.12 kg m^?3 in vertical stratification occurs above and below the mixed layer for model runs with and without TC mixing. This anomaly is roughly 25% of the entire paleo‐density signal observed just prior to 1700 CE. These results suggest that TC mixing alone cannot completely explain the density anomaly observed prior to 1700 CE, but support TC variability as an important contributor to enhancing oceanic stratification during this interval. Copyright © 2011 John Wiley & Sons, Ltd.     

Footwall mineralization during Late Miocene extension along the West Cycladic Detachment System,Lavrion, Greece

The West Cycladic Detachment System (WCDS) has been mapped from the western Cycladic islands to Lavrion (mainland Greece), where several top‐to‐SSW low‐angle normal faults at different structural levels are observed. Near the detachment horizon, hydrothermal fluid flow originating from Miocene intrusions lead to high‐temperature carbonate strata‐bound Pb–Ag–Zn ore deposits. Zircon (U–Th)/He cooling ages from the mineralized footwall are 7.1 ± 0.6 to 7.9 ± 0.6 Ma. Carbon‐ and O‐isotope analyses of the carbonate host indicate high water‐to‐rock ratios during brittle deformation‐induced metasomatism, and that this interaction, unrelated to proximity of the intrusions, plays the dominant role in the mineralization. The Late Miocene geology of Lavrion is strikingly similar to Serifos island on the SE termination of the WCDS, both characterized by strong localization of detachment faulting and the interaction of brittle deformation with the injection of fluids related to granitoid intrusions.     

Multiscale approach to geo‐composite cellular structures subjected to rock impacts

Geo‐composite cellular structures are an efficient technological solution for various applications in civil engineering. This type of structure is particularly well adapted to resisting rockfalls and can act as a defensive structure. However, the design of such structures is for the most part empirically based; this lack of research‐based design stagnates optimization and advanced development. In this paper, the mechanical behaviour of a geo‐composite cellular structure is investigated using a multi‐scale approach, from the individual cell made up of an assembly of rocky particles contained in a wire netting cage to the entire structure composed of a regular array of cells. Based on discrete modelling of both the cell and structure scales, a computational tool has been developed for design purposes. Copyright © 2007 John Wiley & Sons, Ltd.     

The X10 Flare on 29 October 2003: Was It Triggered by Magnetic Reconnection between Counter-Helical Fluxes?

Vector magnetograms taken at Huairou Solar Observing Station (HSOS) and Mees Solar Observatory (MSO) reveal that the super active region (AR) NOAA 10486 was a complex region containing current helicity flux of opposite signs. The main positive sunspots were dominated by negative helicity fields, while positive helicity patches persisted both inside and around the main positive sunspots. Based on a comparison of two days of deduced current helicity density, pronounced changes associated with the occurrence of an X10 flare that peaked at 20:49 UT on 29 October 2003 were noticed. The average current helicity density (negative) of the main sunspots decreased significantly by about 50%. Accordingly, the helicity densities of counter-helical patches (positive) were also found to decay by the same proportion or more. In addition, two hard X-ray (HXR) “footpoints” were observed by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) during the flare in the 50 – 100 keV energy range. The cores of these two HXR footpoints were adjacent to the positions of two patches with positive current helicity that disappeared after the flare. This strongly suggested that the X10 flare on 29 October 2003 resulted from reconnection between magnetic flux tubes having opposite current helicity. Finally, the global decrease of current helicity in AR 10486 by ∼50% can be understood as the helicity launched away by the halo coronal mass ejection (CME) associated with the X10 flare. Electronic Supplementary Material The online version of this article () contains supplementary material, which is available to authorized users.     

Controlled moraines: origins,characteristics and palaeoglaciological implications

Controlled moraines are supraglacial debris concentrations that become hummocky moraine upon de-icing and possess clear linearity due to the inheritance of the former pattern of debris-rich folia in the parent ice. Linearity is most striking wherever glacier ice cores still exist but it increasingly deteriorates with progressive melt-out. As a result, moraine linearity has a low preservation potential in deglaciated terrains but hummocky moraine tracts previously interpreted as evidence of areal stagnation may instead record receding polythermal glacier margins in which debris-rich ice was concentrated in frozen toe zones. Recent applications of modern glaciological analogues to palaeoglaciological reconstructions have implied that: (a) controlled moraine development can be ascribed to a specific process (e.g. englacial thrusting or supercooling); and (b) controlled moraine preservation potential is good enough to imply the occurrence of the specific process in former glacier snouts (e.g. ancient polythermal or supercooled snouts). These assumptions are tested using case studies of controlled moraine construction in which a wide range of debris entrainment and debris-rich ice thickening mechanisms are seen to produce the same geomorphic features. Polythermal conditions are crucial to the concentration of supraglacial debris and controlled moraines in glacier snouts via processes that are most effective at the glacier–permafrost interface. End moraines lie on a process–form continuum constrained by basal thermal regime. The morphological expression of englacial structures in controlled moraine ridges is most striking while the moraines retain ice cores, but the final deposits/landforms tend to consist of discontinuous transverse ridges with intervening hummocks, preserving only a weak impression of the former englacial structure. These are arranged in arcuate zones of hummocky moraine up to 2 km wide containing ice-walled lake plains and lying down flow of streamlined landforms produced by warm-based ice. A variety of debris entrainment mechanisms can produce the same geomorphic signature. Spatial and temporal variability in process–form relationships will lead to the sequential development of different types of end moraines during the recession of a glacier or ice sheet margin.     

Quantifying the seasonal variations in fluvial and eolian sources of terrigenous material to Cariaco Basin,Venezuela

The varved sediments that accumulate in the Cariaco Basin provide a detailed archive of the region’s climatic history, including a record of the quantity of fluvial and wind-transported material. In this study, we examine the sedimentological characteristics (clay mineralogy and grain size) of both surface sediments and sinking lithogenic material collected from sediment trap samples over a three-year period from 1997 to 2000. Data from biweekly sediment trap samples show a tri-modal particle size distribution, with prominent peaks at 2, 22 and 80 μm, indicating sediment contributions from both eolian and fluvial sources. The clay mineralogy of the water column samples collected from 1997 to 1999 also shows distinctive characteristics of eolian and fluvial material. An examination of surface sediment samples from the Cariaco Basin indicates that the Unare River is the main source of riverine sediments to the eastern sub-basin. By combining these sedimentological proxies, we estimate that ～10% of the terrigenous material delivered to the Cariaco Basin is eolian, while ～90% is fluvial. This represents an annual dust accumulation rate of ～0.59 mg/cm²/yr. Since aerosols are closely linked to climate variability, the ability to quantify paleo-dust fluxes using sedimentological characteristics will be a useful tool for future paleoclimate studies looking at sub-Saharan aridity and latitudinal migration of the Intertropical Convergence Zone.     

Mass‐dependent fractionation of nickel isotopes in meteoritic metal

Abstract— We measured nickel isotopes via multicollector inductively coupled plasma mass spectrometry (MC‐ICPMS) in the bulk metal from 36 meteorites, including chondrites, pallasites, and irons (magmatic and non‐magmatic). The Ni isotopes in these meteorites are mass fractionated; the fractionation spans an overall range of ～0.4‰ amu^?1. The ranges of Ni isotopic compositions (relative to the SRM 986 Ni isotopic standard) in metal from iron meteorites (～0.0 to ～0.3‰ amu^?1) and chondrites (～0.0 to ～0.2‰ amu^?1) are similar, whereas the range in pallasite metal (～–0.1 to 0.0‰ amu^?1) appears distinct. The fractionation of Ni isotopes within a suite of fourteen IIIAB irons (～0.0 to ～0.3‰ amu^?1) spans the entire range measured in all magmatic irons. However, the degree of Ni isotopic fractionation in these samples does not correlate with their Ni content, suggesting that core crystallization did not fractionate Ni isotopes in a systematic way. We also measured the Ni and Fe isotopes in adjacent kamacite and taenite from the Toluca IAB iron meteorite. Nickel isotopes show clearly resolvable fractionation between these two phases; kamacite is heavier relative to taenite by ～0.4‰ amu^?1. In contrast, the Fe isotopes do not show a resolvable fractionation between kamacite and taenite. The observed isotopic compositions of kamacite and taenite can be understood in terms of kinetic fractionation due to diffusion of Ni during cooling of the Fe‐Ni alloy and the development of the Widmanstätten pattern.     

Catastrophic landslides,glacier behaviour and moraine formation – A view from an active plate margin

The influence of large bedrock landslides (“rock avalanches”) on the behaviour of glaciers is incompletely recognised. Here we present an example from an active tectonic margin in South Island, New Zealand where large earthquakes leave a significant imprint on glacial records. We demonstrate that terminal moraines on the western side of the Southern Alps record both ‘ordinary’ (i.e. climate-driven) and landslide-initiated glacial advances. Following consideration of the processes involved in rock avalanche-initiated moraine construction we suggest ways of determining the nature of the advance that built the terminal moraine. The implications of these observations are important in breaking the conventional linkage of individual terminal moraines with climate forcing.