Statewide Estimates of Undiscovered Deposits of Gold,Silver, Copper,Lead, and Zinc

Estimates of the number of undiscovered deposits on a statewide basis offer a different perspective on the nation's undiscovered resources of gold, silver, copper, lead, and zinc. Mean estimates of the number of undiscovered deposits statewide were extracted from the estimates of undiscovered deposits nationwide. More than 50 undiscovered deposits are estimated to occur in Alaska, Arizona, Nevada, and Wisconsin. Estimating the number of undiscovered deposits statewide serves as a measure of a state's total remaining mineral resources in known conventional deposit types.     

Basement structural architecture and hydrocarbon conduit potential of polygonal faults in the Cooper‐Eromanga Basin,Australia

A thorough and complete understanding of the structural geology and evolution of the Cooper‐Eromanga Basin has been hampered by low‐resolution seismic data that becomes particularly difficult to interpret below the thick Permian coal measures. As a result, researchers are tentative to interpret the basement fault architecture within the basin, which is largely undefined. To provide a better understanding of the basement fault geometry, all available two‐dimensional seismic lines together with 12 three‐dimensional seismic surveys were structurally interpreted with assistance from seismic attribute analysis. The Upper Cretaceous Cadna‐owie Formation and top Permian reflectors were analysed using a common seismic attribute technique (incoherency) that was used to infer the presence of faults that may have otherwise been overlooked. Detailed basement fault maps for each seismic survey were constructed and used in conjunction with two‐dimensional seismic data interpretation to produce a regional basement fault map. Large north‐northeast–south‐southwest‐striking sinistral strike–slip faults were identified within the Patchawarra Trough appearing to splay from the main northeast–southwest‐striking ridge. These sinistral north‐northeast–south‐southwest‐striking faults, together with field‐scale southeast–northwest‐striking dextral strike–slip faults, are optimally oriented to have potentially developed as a conjugated fault set under a south‐southeast–north‐northwest‐oriented strike–slip stress regime. Geomechanical modelling for a regionally extensive system of Cretaceous polygonal faults was performed to calculate the Leakage Factor and Dilation Tendency of individual faults. Faults that extend into Lower Cretaceous oil‐rich reservoirs with strikes of between 060°N and 140°N and a high to near‐vertical dip angle were identified to most likely be acting as conduits for the tertiary migration of hydrocarbons from known Lower Cretaceous hydrocarbon reservoirs into shallow Cretaceous sediments. This research provides valuable information on the regional basement fault architecture and a more detailed exploration target for the Cooper‐Eromanga Basin, which were previously not available in literature.     

Mineralogy of soils from two continental-scale transects across the United States and Canada and its relation to soil geochemistry and climate

Quantitative mineralogy correlates with major-, minor- and trace-element chemistry for 387 samples of A-horizon and deeper soils collected from east–west and north–south transects across the USA and Canada, where the deeper soils were collected beneath the A-horizon samples. Concentrations of the major elements correlate with specific mineral phases. Minor- and trace-element concentrations correlate with the same phases as the major elements with which they share similar geochemical behavior. Concentrations of quartz and feldspar correlate with precipitation trends east of the Rocky Mountains, and are independent of the underlying rock type and age, indicating that the weathering of soils in this region may have reached a steady-state mineralogy. Other trends in mineralogy relate to physiographic province. The combination of quantitative mineralogy and chemical analysis yields a much richer portrait of soils than can be gained from chemistry alone, because the origins of chemical trends and the chemical availability of specific elements are related to mineralogy.     

http://www.sciencedirect.com/science/article/pii/S167498711400108X

We present three 3D numerical models of deep subduction where buoyant material from an oceanic plateau and a plume interact with the overriding plate to assess the influence on subduction dynamics,trench geometry,and mechanisms for plateau accretion and continental growth.Transient instabilities of the convergent margin are produced,resulting in:contorted trench geometry;trench migration parallel with the plate margin;folding of the subducting slab and orocline development at the convergent margin;and transfer of the plateau to the overriding plate.The presence of plume material beneath the oceanic plateau causes flat subduction above the plume,resulting in a "bowed" shaped subducting slab.In plateau-only models,plateau accretion at the edge of the overriding plate results in trench migration around the edge of the plateau before subduction is re-established directly behind the trailing edge of the plateau.The plateau shortens and some plateau material subducts.The presence of buoyant plume material beneath the oceanic plateau has a profound influence on the behaviour of the convergent margin.In the plateau + plume model,plateau accretion causes rapid trench advance.Plate convergence is accommodated by shearing at the base of the plateau and shortening in the overriding plate.The trench migrates around the edge of the plateau and subduction is re-established well behind the trailing edge of the plateau,effectively embedding the plateau into the overriding plate.A slab window forms beneath the accreted plateau and plume material is transferred from the subducting plate to the overriding plate through the window.In all of the models,the subduction zone maintains a relatively stable configuration away from the buoyancy anomalies within the downgoing plate.The models provide a dynamic context for plateau and plume accretion in Phanerozoic accretionary orogenic systems such as the East China Orogen and the Central Asian Orogen(Altiads),which are characterised by accreted ophiolite complexes with diverse geochemical affinities,and a protracted evolution of accretion of exotic terranes including oceanic plateau and terranes with plume origins.     

Avoiding numerical stability problems of long duration DGPS/INS Kalman filters

A current pursuit of the geodetic community is the optimal integration of differential GPS (DGPS) and inertial navigation system (INS) data streams for precise and efficient position and gravity vector surveying. Therein a complete INS and multiple-antenna GPS receiver payload, mounted on a moving platform, is used in conjunction with a network of ground-fixed single antenna GPS receivers. This paper presents a complete, GPS-based, external updating measurement model for the applicable Kalman filter. The model utilizes four external observation types for every GPS satellite in-view: DGPS range differences, single phase differences, and single phase-rate differences; as well as the mobile, multipleantenna GPS receiver's measurement of theerrors in the INS's estimate of the phase difference between any two vehicle-borne GPS antennae. Although not widely conveyed in the geodetic world, the inertial navigation community has long known that traditional Kalman filter covariance propagation recurrences are inherently unstable when such highly accurate external updates are repeatedly applied (every 1 second) over long time durations. A hybrid square root covariance/U — D covariance factorization approach is a numerically stable alternative and is reviewed herein. The hybrid makeup of the algorithm is necessitated by the correlated nature of the fourth type of GPS external measurement listed above (each vehicle-borne GPS antenna formstwo baselines). Such measurement correlations require a functional transformation of the overall external updating model to permit the multiple updates (simultaneously available at each updating epoch) to be sequentially (and efficiently) processed. An appropriate transformation is given. Stable covariance propagation relationships are presented and the transformed Kalman gain is also furnished and its use in the determination of the externally updated error states is discussed. Specific DGPS/INS instabilities produced by the traditional recurrences are displayed. The stable alternative method requires about 25% more CPU time than the traditional Kalman recurrences. With the ever-increasing computational speeds of microprocessors, this added CPU time is of no real concern.     

Continuous Facies Updating Using the Ensemble Kalman Filter and the Level Set Method

We present a methodology based on the ensemble Kalman filter (EnKF) and the level set method for the continuous model updating of geological facies with respect to production data. Geological facies are modeled using an implicit surface representation and conditioned to production data using the ensemble Kalman filter. The methodology is based on Gaussian random fields used to deform the facies boundaries. The Gaussian random fields are used as the model parameter vector to be updated sequentially within the EnKF when new measurements are available. We show the successful application of the methodology to two synthetic reservoir models.     

Recommended Values of 239Pu, 240Pu and 239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.     

Nd,Sr, and Pb isotopic characteristics of Cretaceous intrusive rocks from deep levels of the Sierra Nevada batholith,Tehachapi Mountains,California

The Cretaceous gabbroic to granitic intrusive rocks of the Tehachapi Mountains were emplaced at depths of 25–30 km and thus afford a view of deep processes in the Sierra Nevada batholith. They consist of the 115 Ma Tehachapi suite and the 100 Ma Bear Valley suite; new zircon U-Pb age data reveal the presence of the latter as far west as Grapevine Canyon. The Nd, Sr, Pb, and O isotopic whole-rock data and zircon Pb inheritance patterns for the bulk of the suites suggest an origin by mixing between depleted mantlederived magmas and metasedimentary material with a substantial component of old continental material. However, this mixing is not evident in variations between isotopic ratios and chemical and lithologic parameters. This implies that isotopic hybridization of magmas took place deeper than 30 km, and that fractionation processes are likely responsible for the bulk of the chemical variation in this part of the Sierra Nevada batholith. Consideration of the isotopic data in the context of the Sierra Nevada batholith as a whole suggests that the well-known east-to-west isotopic gradients in the batholith may reflect a change in the average isotopic character of the preintrusive frame-work rather than a change in amount of crustal component. On the other hand, the lack of areal gradients in Sr and Nd isotopic ratios in the main study area may indicate a lack of pronounced gradation at deep levels, at least within the western batholith.