Structural controls of lode-gold mineralization by mafic dykes in late-Paleozoic granitoids of the Kochkar district, southern Urals, Russia

The Kochkar gold district in the East Uralian Zone of the southern Urals is located in late-Paleozoic granite gneisses of the Plast massif. Gold mineralization is associated with tabular quartz lodes that are preferentially developed along the margins of easterly trending mafic dykes. Fabric development indicates that dykes had a profound influence on the development of shear zones in granitoids. ENE- and SE-trending dykes have been reactivated as dextral and sinistral oblique strike-slip shear zones, respectively, forming a set of approximately conjugate shear zones related to the Permian, regional-scale E-W directed shortening. Dyke-shear zone relationships in the Plast massif are the result of strain refraction due to the presence of biotite-rich, incompetent dykes in more competent granite-gneisses. Deformation and the formation of associated gold-quartz lodes occurred close to peak-metamorphic, upper-greenschist to lower-amphibolite facies conditions. Strain refraction has resulted in partitioning of the bulk strain into a component of non-coaxial mainly ductile shear in mafic dykes, and a component of layer-normal pure shear in surrounding granitoids where deformation was brittle-ductile. Brittle fracturing in granitoids has resulted in the formation of fracture permeabilities adjacent to sheared dykes, that together with the layer-normal dilational component, promoted the access of mineralizing fluids. Both ore-controlling dykes and gold-quartz lodes were subsequently overprinted by lower greenschist-facies, mainly brittle fault zones and associated hydrothermal alteration that post-date gold mineralization. Received: 15 October 1998 / Accepted: 18 August 1999     

Composition of the core,I. Solubility of oxygen in molten iron at high temperatures

Experiments on the solubility of FeO in molten iron have been carried out at temperatures between 2100 and 2550°C. The results show that liquid FeO is extensively soluble in molten iron at 2500°C and indicate that they probably become completely miscible above 2800°C. Liquid iron in equilibrium with crystalline magnesiowüstite (Mg_0.8Fe_0.2)O which is believed to be an important mineral in the lower mantle, would dissolve about 14 mol.% of FeO at 2500°C and 40 mol.% of FeO at 2800°C. The geochemical implications of these results are discussed. It is concluded that the outer core probably contains a large amount of dissolved FeO and that oxygen is probably the principal light element in the outer core.     

Studies of the ionospheric <Emphasis Type="Italic">D</Emphasis> region using partial reflections and radiowave scattering by artificial periodical irregularities

Results of the studies of the ionospheric D region during spring periods of 2004 and 2005 using partial reflections and radiowave scattering by artificial periodical irregularities are presented. It has been found that the vertical profile of the electron density during this period has a local minimum at a height of ～75 km, which is absent in summer. The causes of the minimum appearance are discussed.     

Uniform half-plane elastodynamic problems by an approximate boundary element method

In this paper the applicability of an approximate Boundary Element Method to uniform half-plane elastodynamic problems is investigated. This method employs the concept of images to construct approximate fundamental solutions for the half-plane and does not require any half-plane surface discretization. The method is formulated in the frequency domain for the case of harmonic disturbances or the Laplace transform domain for the case of transient disturbances. In the latter case a numerical inversion of the transformed solution is necessary to obtain the time domain response. The proposed method can be used as an alternative to boundary element methods that either utilize the infinite plane fundamental solution and thus require a half-plane surface discretization, or employ the exact half-plane fundamental solution, which even though leads to no surface discretization, is of a very lengthy and complicated form. Two characteristics numerical examples are used to illustrate the proposed method and study its advantages and disadvantages.     

Creep parameters of rocks on an engineering scale

Vertical shafts of 137 cm diameter were excavated to measure creep deformations of carbonate shale, weathered limestone and tuff. Changes of diameter at successive time intervals were recorded under constant, radial pressure. Three typical models were chosen for a regression analysis of the experimental data and their fitness were compared to one another in a statistical approach.The introduction of a steady state flow term improves the data fit considerably, and the power law was found to yield an even better result. It was also determined that rock masses in the field contain numerous discontinuities which increase the plasticity of the three types of rock tested. The viscosities determined in-situ were found to be much lower than those derived from small intact specimens by up to several orders of magnitude.     

Mesofossil flora from the Late Cretaceous of New Zealand

This study presents the first report of mesofossils of flowers, fruits and seeds found in the Cretaceous of New Zealand. The specimens were recovered from the Late Cretaceous (Maastrichtian, ca. 70 Ma) at Kai Point Mine, South Island in a sequence of floodplain sediments sampled just below the Barclay Coal Seam. Angiosperm flowers, fruits and seeds occur in the sample. The most common form is an actinomorphic flower with two whorls of three tepals. Anther bases are preserved and the ovary develops into a drupe, all features that are consistent with placement in the Lauraceae. Reproductive structures including seeds of conifers are also described, with some allied to the Podocarpaceae. This contrasts with interpretations of the flora based on macrofossils that indicate abundant Araucariaceae and highlights the different perspectives that mesofossil floras give to any assemblage. The results of the present study support a Late Cretaceous flora at this site mainly dominated by conifers with affinities to Podocarpaceae but also including lauraceous angiosperms.     

Activated release of alkalis during the vesiculation of molten basalts under high vacuum: implications for lunar volcanism

Knudsen cell-quadrupole mass spectrometry was used to study the high-temperature vaporization of Hawaiian basalts, plagioclase, tektites, and samples from the Allende meteorite. Procedures are described by which mass loss rates and vapor pressures of Na and K were measured quantitatively.Gas-rich glassy basalts were observed to vesiculate under vacuum over the 900–1000°C region and simultaneously evaporate alkalis in nonequilibrium fashion at rates (units of μg/g/hr) of approximately 200–300 Na and 75–250 K. Degassed residues of the same basalts demonstrated equilibrium evaporation rates (over the same temperature range) of 60–120 Na and 30–60 K. The gas-deficient plagioclase and tektite sample showed only equilibrium vaporization with rates of 60 Na, 10 K (plagioclase) and 10 Na, 5K (tektites) at 900–1000°C. The Allende meteorite vaporized at rates of 2400 Na and 200 K at 900–1000°C, possibly by the reaction of Na₂O and K₂O with C or S₂, or by the thermal decomposition of nepheline or sodalite.The nonequilibrium vaporization of alkalis from the gas-rich basalts is attributed to vigorous agitation of the melt during its vesiculation by a gas phase composed principally of SO₂, CO₂, H₂O, CO, and H₂S. The major gases released from the Allende meteorite at 900–1000°C are, in order of decreasing abundance, CO, S₂, CO₂, H₂O, SO₂, and H₂S.It is proposed that nonequilibrium vaporization of alkalis during the vesiculation of lunar lavas was responsible for the production of alkali-rich vapors which subsequently deposited plagioclase crystals in the vugs of lunar rocks. The vesiculative, nonequilibrium vaporization of Na and K during a lunar volcanic eruption should be expected to occur at a high rate upon initial extrusion of the lava into vacuum but then decrease by a factor of approximately three when degassing is nearing completion. Vaporization losses remain inadequate to explain the uniformly low alkali concentrations in lunar basalts.     

Diffusion of tetravalent cations in zircon

Diffusion rates for the three tetravalent cations U, Th and Hf have been measured in synthetic zircon. Diffusant sources included oxide powders and ground pre-synthesized silicates. Rutherford backscattering spectrometry (RBS) was used to measure depth profiles. Over the temperature range 1400–1650 °C, the following Arrhenius relations were obtained (diffusion coefficients in m²sec⁻¹): log D _Th = (1.936 ± 0.9820) + (− 792 ± 34 kJ mol⁻¹ /2.303 RT) log D _U = (0.212 ± 2.440) + (− 726 ± 83 kJ mol⁻¹ /2.303 RT) log D _Hf = (3.206 ± 1.592) + (− 812 ± 54 kJ mol⁻¹ /2.303 RT) The data show a systematic increase in diffusivity with decreasing ionic radius (i.e., faster diffusion rates for Hf than for U or Th), a trend also observed in our earlier study of rare earth diffusion in zircon. Diffusive fractionation may be a factor in the Lu-Hf system given the much slower diffusion rates of tetravalent cations when compared with the trivalent rare earths. The very slow diffusion rates measured for these tetravalent cations suggest that they are essentially immobile under most geologic conditions, permitting the preservation of fine-scale chemical zoning and isotopic signatures of inherited cores. Received: 12 July 1996 / Accepted: 2 December 1996