Hydrothermal Vent Geology and Biology at Earth’s Fastest Spreading Rates

Earth’s fastest present seafloor spreading occurs along the East Pacific Rise near 31°–32° S. Two of the major hydrothermal plume areas discovered during a 1998 multidisciplinary geophysical/hydrothermal investigation of these mid-ocean ridge axes were explored during a 1999 Alvin expedition. Both occur in recently eruptive areas where shallow collapse structures mark the neovolcanic axis. The 31° S vent area occurs in a broad linear zone of collapses and fractures coalescing into an axial summit trough. The 32° S vent area has been volcanically repaved by a more recent eruption, with non-linear collapses that have not yet coalesced. Both sites occur in highly inflated areas, near local inflation peaks, which is the best segment-scale predictor of hydrothermal activity at these superfast spreading rates (150 mm/yr).     

Feeding of benthic foraminifera on diatoms and sewage-derived organic matter: an experimental application of lipid biomarker techniques

Foraminiferal ecology at sewage outfalls has been investigated in numerous field studies over the last 30 years. Foraminifera have been frequently used as biomonitors of sewage pollution since they are both abundant and ubiquitous. Sewage outfalls have been demonstrated to have both positive and negative effects on adjacent foraminiferal populations, but it has never been shown conclusively why sewage affects foraminifera in these ways. Such information on the impact mechanisms of sewage pollution is essential if foraminifera are to be used as sewage pollution biomonitors, and also to understand the ecology of these important protists. One possible cause of a positive effect is the direct consumption of sewage-derived particulate organic matter (POM) by the foraminifera themselves. However this hypothesis has never been tested experimentally. Here, lipid (fatty acid and sterol) biomarker techniques were applied to study the ingestion of two potential food items by the foraminiferan Haynesina germanica in the laboratory. An experiment was conducted to confirm that the laboratory conditions were conducive to the survival and feeding of the foraminifera. In this experiment, foraminifera were provided with the pennate diatom Phaeodactylum tricornutum, which was considered to be a suitable food source. After 2 weeks, a four-fold increase in the levels of the diatom fatty acid biomarker, 20:5(n-3), in the foraminifera suggested that they had fed actively on the diatoms and survived under the experimental conditions. These experimental conditions were used in the main experiment, where foraminifera were fed the POM from sewage. Lipid biomarker analysis indicated that H. germanica did not consume secondary treated sewage-derived POM. Neither fatty acid profiles in the sewage nor coprostanol, the diagnostic human faecal sterol, were detected in foraminifera after exposure to the potential sewage food source. However, foraminifera may have consumed bacteria associated with the sewage in the experiment. The findings are discussed in terms of current EU legislation on sewage treatment that has affected the composition of sewage discharges, and therefore possibly reduced the nutritive value of sewage to the marine benthos.     

Observed storminess patterns and trends in the circum-Arctic coastal regime

Storm event statistics for the open-water season (June–October) were extracted from the terrestrial-based observational record throughout the circumpolar coastal regime over the period 1950–2000. The Barents/Norwegian and Kara regions exhibited an active spring/quiet summer signature typical of the mid-latitudes. The Kara and Laptev Sea regions had a strong June peak possibly associated with early sea ice breakup. The Chukchi sector exhibited large storm power values (defined as speed²*duration). Storm counts declined from 1950 to 1970, shifted rapidly from 1970 to 1974 to a level of greater mean activity and greater inter-annual variability, and declined after 1988.     

Atmospheric forcing of fine-sand transport on a low-energy inner shelf: south-central Louisiana,USA

Hydrodynamic and sediment transport measurements from instrumentation deployed during a 54-day winter period at two sites on the Louisiana inner shelf are presented. Strong extratropical storms, with wind speeds of 7.8 to 15.1 m s^-1, were the dominant forcing mechanism during the study. These typically caused mean oscillatory flows and shear velocities about 33% higher than fair weather (averaging 12.3 and 3.2 cm s^-1 at the landward site, and 11.4 and 2.7 cm s^-1 at the seaward site, respectively). These responses were coupled with mean near-bottom currents more than twice as strong as during fair weather (10.3 and 7.5 cm s^-1 at the landward and seaward sites, respectively). These flowed in approximately the same direction as the veering wind, causing a net offshore transport of fine sand. Weak storms were responsible for little sediment transport whereas during fair weather, onshore sand transport of approximately 25-75% of the storm values appears to have occurred. This contradicts previous predictions of negligible fair-weather sediment movement on this inner shelf.     

Tectonic control over topography and channel sedimentation across the forearc slope of the southern Kurile Trench

A high-resolution seismic survey covering more than 2,000 km² has revealed the processes responsible for the slope morphology and channel sedimentation across the forearc slope-basin of the Kurile Arc–NE Japan Arc collision zone, offshore from Tokachi (Hokkaido, Japan). The dominant slope contours parallel the trench but, in the middle and lower reaches of the southern slope, contours are convex-shaped with an offshore trend. This sector of the slope is traversed diagonally by the Hiroo submarine channel. The offshore-trending convex contours and the channel course have developed through the interplay of tectonic and sedimentary processes, including the development of anticlines, anticline-induced lobe sedimentation and channel avulsion. In its upper reaches, the channel is restricted by a topographic low associated with NNW–SSE-trending anticlines which developed within the upper and middle slope sectors during late Miocene uplift. The uplift timing and trend of these anticlines indicate that they resulted from collision, the channel sedimentology and slope morphology of the middle and lower slopes having been influenced by Pliocene uplift of NE–SW-trending anticlines. The trends of these anticlines parallel those of the Kurile Trench. The Pliocene and early Pleistocene strata of the middle and lower slopes consist of ponded lobe sediments deposited along the palaeo-Hiroo submarine channel on the landward side of the anticlines. As a lobe pile accumulated, the channel thalweg shifted to the north of the stack, allowing the channel to bypass the topographic high formed by the growing stack. Thick levee deposits built up along the channel course during the late Pleistocene and Holocene. These levees, along with the Pliocene and early Pleistocene lobes, are reflected in the present-day sigmoid-shaped, convex offshore-trending contours. Thus, the interplay of subduction- and collision-related anticlines, tectonic-related channel ponding, and avulsion has contributed to the slope morphology of the southern Kurile Trench.     

Freezing as a method of sample preservation for the analysis of dissolved inorganic nutrients in seawater

It is often desirable or necessary to store collected seawater samples prior to analysis for dissolved inorganic nutrients. It is therefore important to establish preservation and storage techniques that will ensure sample integrity and will not alter the precision or accuracy of analysis. We have performed a series of experiments on the storage of nutrient samples collected at the oligotrophic North Pacific benchmark Station ALOHA, using both standard autoanalyses and low-level techniques. Our results reveal that for oligotrophic oceanic waters, the immediate freezing of an unfiltered water sample in a clean polyethylene bottle is a suitable preservation method. This procedure is simple, it avoids potentially contaminating sample manipulations and chemical additions, and it adequately preserves the concentrations of nitrate + nitrite, soluble reactive phosphate, and soluble reactive silicate within a single water sample.     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.