Improved dissolved oxygen status following removal of exotic weed mats in important fish habitat lagoons of the tropical Burdekin River floodplain, Australia

The Burdekin delta floodplain, north Queensland, is highly modified for agricultural purposes. Riparian condition is very poor and exotic aquatic weeds dominate waterways. Historically, most streams and lagoons were highly seasonal, but those now used for the delivery of irrigation water maintain elevated flows and increased turbidity and nutrient loading. These factors have aided exotic weed growth and many major lagoons are covered by dense water hyacinth (Eichhornia crassipes) mats which greatly reduce dissolved oxygen levels, one of the most important water quality variables for aquatic fauna. Mechanical harvesting of water hyacinth from several of these lagoons resulted in rapid and substantial increases in dissolved oxygen saturation, and improved suitability of the habitat to support fish species. Decrease in dissolved oxygen as water passes sequentially through weed-infested lagoons, justified the approach of harvesting upstream lagoons first, however, the channels that connect these lagoons remain weed-infested and are still impacting upon downstream oxygen levels.     

Paleogeography of the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB) from Eocene to Pliocene

Twenty paleogeographic maps are presented for Middle Eocene (Lutetian) to Late Pliocene times according to the stratigraphical data given in the companion paper by Berger et al. this volume. Following a first lacustrine-continental sedimentation during the Middle Eocene, two and locally three Rupelian transgressive events were identified with the first corresponding with the Early Rupelian Middle Pechelbronn beds and the second and third with the Late Rupelian Serie Grise (Fischschiefer and equivalents). During the Early Rupelian (Middle Pechelbronn beds), a connection between North Sea and URG is clearly demonstrated, but a general connection between North Sea, URG and Paratethys, via the Alpine sea, is proposed, but not proved, during the late Rupelian. Whereas in the southern URG, a major hiatus spans Early Aquitanian to Pliocene times, Early and Middle Miocene marine, brackish and freshwater facies occur in the northern URG and in the Molasse Basin (OMM, OSM); however, no marine connections between these basins could be demonstrated during this time. After the deposition of the molasse series, a very complex drainage pattern developed during the Late Miocene and Pliocene, with a clear connection to the Bresse Graben during the Piacenzian (Sundgau gravels). During the Late Miocene, Pliocene and Quaternary sedimentation persisted in the northern URG with hardly any interruptions. The present drainage pattern of the Rhine river (from Alpine area to the lower Rhine Embayment) was not established before the Early Pleistocene.     

The Rwenzori Mountains,a landslide-prone region?

With its exceptionally steep topography, wet climate, and active faulting, landslides can be expected to occur in the Rwenzori Mountains. Whether or not this region is prone to landsliding and more generally whether global landslide inventories and hazard assessments are accurate in data-poor regions such as the East African highlands are thus far unclear. In order to address these questions, a first landslide inventory based on archive information is built for the Rwenzori Mountains. In total, 48 landslide and flash flood events, or combinations of these, are found. They caused 56 fatalities and considerable damage to road infrastructure, buildings, and cropland, and rendered over 14,000 persons homeless. These numbers indicate that the Rwenzori Mountains are landslide-prone and that the impact of these events is significant. Although not based on field investigations but on archive data from media reports and laymen accounts, our approach provides a useful complement to global inventories overlooking this region and increases our understanding of the phenomenon in the Rwenzori Mountains. Considering the severe impacts of landslides, the population growth and related anthropogenic interventions, and the likelihood of more intense rainfall conditions, there is an urgent need to invest in research on disaster risk reduction strategies in this region and other similar highland areas of Africa.     

Subsidence et effondrements le long du littoral jordanien de la mer Morte : apports de la gravimétrie et de l'interférométrie radar différentielle

The Dead Sea shore is affected by major subsidence and sinkholes hazards due to the decrease of the sea level. The frequency of resulting accidents increased during the last four decades. Those phenomena could be at the origin of the catastrophic destruction of a major salt evaporation pond on 22 March 2000. In this paper, we show the main results of eight years of research in gravimetry and radar interferometry devoted to identify potentially hazardous areas, at different scales along the Jordanian Dead Sea coast, from the metric scale (gravimetric approach) to the kilometric one (interferometric approach). To cite this article: D. Closson et al., C. R. Geoscience 335 (2003).     

Neogene tectonostratigraphic history of the southern Neuquén basin (39°–40°30′S,Argentina): implications for foreland basin evolution

Although the Neuquén basin in Argentina forms a key transitional domain between the south‐central Andes and the Patagonian Andes, its Cenozoic history is poorly documented. We focus on the sedimentologic and tectonic evolution of the southern part of this basin, at 39–40°30′S, based on study of 14 sedimentary sections. We provide evidence that this basin underwent alternating erosion and deposition of reworked volcaniclastic material in continental and fluvial settings during the Neogene. In particular, basement uplift of the Sañico Massif, due to Late Miocene–Pliocene intensification of tectonic activity, led to sediment partitioning in the basin. During this interval, sedimentation was restricted to the internal domain and the Collon Cura basin evolved towards an endorheic intermontane basin. From stratigraphic interpretation, this basin remained isolated 7–11 Myr. Nevertheless, ephemeral gateways seem to have existed, because we observe a thin succession downstream of the Sañico Massif contemporaneous with the Collon Cura basin‐fill sequence. Comparisons of stratigraphic, paleoenvironmental and tectonic features of the southern Neuquén basin with other foreland basins of South America allow us to classify it as a broken foreland with the development of an intermontane basin from Late Miocene to Late Pliocene. This implies a thick‐skinned structural style for this basin, with reactivation of basement faults responsible for exhumation of the Sañico Massif. Comparison of several broken forelands of South America allows us to propose two categories of intermontane basins according to their structural setting: subsiding or uplifted basins, which has strong implications on their excavation histories.     

Sub‐Permil Interlaboratory Consistency for Solution‐Based Boron Isotope Analyses on Marine Carbonates

Boron isotopes in marine carbonates are increasingly used to reconstruct seawater pH and atmospheric pCO₂ through Earth’s history. While isotope ratio measurements from individual laboratories are often of high quality, it is important that records generated in different laboratories can equally be compared. Within this Boron Isotope Intercomparison Project (BIIP), we characterised the boron isotopic composition (commonly expressed in δ¹¹B) of two marine carbonates: Geological Survey of Japan carbonate reference materials JCp‐1 (coral Porites) and JCt‐1 (giant clam Tridacna gigas). Our study has three foci: (a) to assess the extent to which oxidative pre‐treatment, aimed at removing organic material from carbonate, can influence the resulting δ¹¹B; (b) to determine to what degree the chosen analytical approach may affect the resultant δ¹¹B; and (c) to provide well‐constrained consensus δ¹¹B values for JCp‐1 and JCt‐1. The resultant robust mean and associated robust standard deviation (s*) for un‐oxidised JCp‐1 is 24.36 ± 0.45‰ (2s*), compared with 24.25 ± 0.22‰ (2s*) for the same oxidised material. For un‐oxidised JCt‐1, respective compositions are 16.39 ± 0.60‰ (2s*; un‐oxidised) and 16.24 ± 0.38‰ (2s*; oxidised). The consistency between laboratories is generally better if carbonate powders were oxidatively cleaned prior to purification and measurement.     

Analysis And Comparison Of Different Estimations Of Mars' Polar Motion

We have summed up three recent modellings of Mars' polar motion (Hilton, 1992; Yoder and Standish, 1997; Zhang, 1998) from which we have studied in particular the Chandler wobble (CW) of the planet and expressions of its period T_CW. We add a fourth study (Kubo, 1991) which deals with the polar motion on the Earth, but whose the results can easily be applied to Mars. To conpare the different expressions of the period T_CW from the authors above, we have chosen common parameters of the planet coming from recent data and we have calculated values of the period corresponding to these parameters after having determined from analytical developments the moments of inertia of the core and of the mantle. We show how the different formula proposed by the authors lead to different values of T_CW and we study in particular the contribution of somc parameters such as the core radius, the mass of the core and the Love number of these values.     

Ionospheric delay corrections for single-frequency GPS receivers over Europe using tomographic mapping

The majority of navigation satellites receivers operate on a single frequency and experience a positioning error due to the ionospheric delay. This can be compensated for using a variety of approaches that are compared in this paper. The study focuses on the last solar maximum. A 4D tomographic imaging technique is used to map the ionospheric electron density over the European region during 2002 and 2003. The electron density maps are then used to calculate the excess propagation delay on the L1 frequency experienced by GPS receivers at selected locations across Europe. The excess delay is applied to correct the pseudo-range single frequency observations at each location and the improvements to the resulting positioning are calculated. The real-time tomographic technique is shown to give navigation solutions that are better than empirical modelling methods and approach the accuracy of the full dual-frequency solution. The improvements in positioning accuracy vary from day to day depending on ionospheric conditions but can be up to 25 m during mid-day during these solar maximum conditions at European mid-latitudes.

Comparison of Travel-Time and Amplitude Measurements for Deep-Focusing Time–Distance Helioseismology

The purpose of deep-focusing time–distance helioseismology is to construct seismic measurements that have a high sensitivity to the physical conditions at a desired target point in the solar interior. With this technique, pairs of points on the solar surface are chosen such that acoustic ray paths intersect at this target (focus) point. Considering acoustic waves in a homogeneous medium, we compare travel-time and amplitude measurements extracted from the deep-focusing cross-covariance functions. Using a single-scattering approximation, we find that the spatial sensitivity of deep-focusing travel times to sound-speed perturbations is zero at the target location and maximum in a surrounding shell. This is unlike the deep-focusing amplitude measurements, which have maximum sensitivity at the target point. We compare the signal-to-noise ratio for travel-time and amplitude measurements for different types of sound-speed perturbations, under the assumption that noise is solely due to the random excitation of the waves. We find that, for highly localized perturbations in sound speed, the signal-to-noise ratio is higher for amplitude measurements than for travel-time measurements. We conclude that amplitude measurements are a useful complement to travel-time measurements in time–distance helioseismology.