北极薄冰-煎饼冰区域中不同重力波驱动形成海流的敏感性分析

A coupled ocean-ice-wave model is used to study ice-edge jet and eddy genesis during surface gravity wave dissipation in a frazil-pancake ice zone. With observational data from the Beaufort Sea, possible wave dissipation processes are evaluated using sensitivity experiments. As wave energy dissipated, energy was transferred into ice floe through radiation stress. Later, energy was in turn transferred into current through ocean-ice interfacial stress. Since most of the wave energy is dissipated at the ice edge, ice-edge jets, which contained strong horizontal shear, appeared both in the ice zone and the ocean. Meanwhile, the wave propagation direction determines the velocity partition in the along-ice-edge and cross-ice-edge directions, which in turn determines the strength of the along-ice-edge jet and cross-ice-edge velocity. The momentum applied in the along-ice-edge(cross-ice-edge)direction increased(decreased) with larger incident angle, which is favorable condition for producing stronger mesoscale eddies, vice versa. The dissipation rate increases(decreases) with larger(smaller) wavenumber, which enhances(reduces) the jet strength and the strength of the mesoscale eddy. The strong along-ice-edge jet may extend to a deep layer(> 200 m). If the water depth is too shallow(e.g., 80 m), the jet may be largely dampened by bottom drag, and no visible mesoscale eddies are found. The results suggest that the bathymetry and incident wavenumber(magnitude and propagation direction) are important for wave-driven current and mesoscale eddy genesis.     

海南典型热带海草床4种代表性鱼类的生长特征及其对海草资源量变化的响应

文章以海南岛新村湾、黎安港和潭门港海草床为研究区域, 选取褐篮子鱼(Siganus fuscessens)、点斑篮子鱼(Siganus guttatus)、四带牙鯻(Pelates quadrilineatus)和细鳞鯻(Terapon jarbua) 4种代表性鱼类为研究对象, 分析其体长与体质量的关系, 并探讨4种鱼类对海草资源量变化的响应。结果表明, 除栖息于潭门港海草床的4种鱼为负异速生长, 其他区域海草床的鱼类均为正异速或等速生长; 4种鱼的体质量生长速率(即异速生长因子b)和肥满度呈现黎安港>新村湾>潭门港的趋势, 并与3个海草床的海草覆盖率、密度和生物量的变化趋势一致; 推测海草资源量下降可能增加鱼类的被捕食压力和减少食物来源, 从而导致生活于海草床的代表性鱼类生长速率下降。     

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.     

Burial and exhumation of the Hoh Xil Basin,northern Tibetan Plateau: Constraints from detrital (U-Th)/He ages

The uplift and associated exhumation of the Tibetan Plateau has been widely considered a key control of Cenozoic global cooling. The south-central parts of this plateau experienced rapid exhumation during the Cretaceous–Palaeocene periods. When and how the northern part was exhumed, however, remains controversial. The Hoh Xil Basin (HXB) is the largest late Cretaceous–Cenozoic sedimentary basin in the northern part, and it preserves the archives of the exhumation history. We present detrital apatite and zircon (U-Th)/He data from late Cretaceous–Cenozoic sedimentary rocks of the western and eastern HXB. These data, combined with regional geological constraints and interpreted with inverse and forward model of sediment deposition and burial reheating, suggest that the occurrence of ca. 4–2.7 km and ca. 4–2.3 km of vertical exhumation initiated at ca. 30–25 Ma and 40–35 Ma in the eastern and western HXB respectively. The initial differential exhumation of the eastern HXB and the western HXB might be controlled by the oblique subduction of the Qaidam block beneath the HXB. The initial exhumation timing in the northern Tibetan Plateau is younger than that in the south-central parts. This reveals an episodic exhumation of the Tibetan Plateau compared to models of synchronous Miocene exhumation of the entire plateau and the early Eocene exhumation of the northern Tibetan Plateau shortly after the India–Asia collision. One possible mechanism to account for outward growth is crustal shortening. A simple model of uplift and exhumation would predict a maximum of 0.8 km of surface uplift after upper crustal shortening during 30–27 Ma, which is insufficient to explain the high elevations currently observed. One way to increase elevation without changing exhumation rates and to decouple uplift from upper crustal shortening is through the combined effects of continental subduction, mantle lithosphere removal and magmatic inflation.     

Small‐area patch‐merging method accounting for both local constraints and the overall area balance

Small‐area patch merging is a common operation in land use data generalization. However, existing research on small‐area patch merging has mainly focused on local compatibility measures, which often lead to area imbalances among land use types from a global perspective. To address the shortcomings of previous studies by resolving local and global concerns simultaneously, this article proposes a merging method that considers both local constraints and the overall area balance. First, a local optimization model that considers three constraints—namely, the areas of neighboring patches, the lengths of shared arcs, and semantic similarity—is established. The areas of small patches are first pre‐allocated. Subsequently, in accordance with an area change threshold for individual land use types, land use types with area changes that exceed this threshold are identified. The patches corresponding to these land use types are subjected to iterative adjustments while considering the overall area balance. Based on their area splitting abilities, the split lines for small‐area patches are determined, and small‐area patches are merged. Finally, actual data from Guangdong Province are used for validation. The experimental results demonstrate that the proposed method is capable of preserving the local compatibility of patches while balancing the overall area associated with each land use type.     

毛乌素沙地布寨淖尔下风向沙化湖滨地表沉积物理化特性

布寨淖尔湖是鄂尔多斯高原毛乌素沙地腹地的代表性盐湖,其东南部分布着平坦裸露的沙化湖滨\,湖岸沙丘及半固定沙丘,地表均沉积有大量沙物质与粉尘,这些松散富盐物质在风力侵蚀作用下常形成盐碱尘暴,威胁下风向区域的生态环境安全。研究了布寨淖尔湖东南部区域2.5 km范围内地表沉积物的土壤粒度与理化特性,旨在为盐碱尘暴源区的防治与生态治理提供基础科学参考。结果表明:布寨淖尔湖滨裸露地表沉积物以粗砂、中沙和细砂为主;从湖心沿东南方向等距离(0.5 km)采样,距湖心越远,粗砂和细砂含量逐渐减小,极细砂、粉砂和黏土含量逐渐增加,中砂含量无明显变化。地表沉积物含水率、容重随与湖心距离的增加逐渐增加,pH值、全盐量及电导率则呈逐渐减小趋势;沉积物阳离子以Na⁺为主,阴离子以Cl^-为主,其次为SO₄^2-、HCO^-₃。整体看,区内地表碱化较为严重,区域下风向土壤理化特征呈明显有规律变化趋势,湖滨地表土壤有明显风蚀迹象,可能是盐碱尘暴与湖岸沙丘形成的重要物源区。     

闽中、闽东渔场扁舵鲣的资源生物学

本文以1981～1984年4～9月累计18个月在闵中、闵东渔场开展中上层鱼类资源开发性探捕调查的材料,报道了扁舵鲣的生态分布、群体结构和生活史主要特征。鱼群先后于4～7月由南而北进入本渔场,数量分布以5月为多;栖息的最适温、盐度分别为23.5～25.5℃和33～34;渔获群体由0～V龄组成;性成熟的最小年龄为Ⅰ龄,最小叉长271～280mm;生长参数L_∞=484.44mm,W_∞=2050.76g,K=0.5109,t_0=0.3598;瞬时自然死亡率为0.8937,开发比率为0.2138,属于轻度利用的鱼类资源,尚有较大的开发潜力。     

海浪预报产品数据库管理系统开发研究

本文介绍海浪预报产品数据库管理系统，包括数据库管理系统的总体设计，硬软件的配置，数据库管理系统的主要内容和解决的关键技术。该数据库管理系统的建成，提供了我国近海和西北太平洋海浪预报的系统性资料，不仅对提高海浪预报准确率提供基础资料，也给海浪中长期预测预报方法研究和区域海洋学研究带来极大帮助。     

PS Vir:a short-period solar-like contact binary

We present multi-color photometric observations and a one-dimensional spectrum, acquired from March 2016 to May 2017, for the short-period eclipsing binary PS Vir, by using the 2.16-m,85-cm and 60-cm telescopes at Xinglong station, which is administered by National Astronomical Observatories, Chinese Academy of Sciences. The spectral type was determined as G2V from the onedimensional spectrum. The photometric solution was reduced from BV Rc light curves. The results imply that PS Vir is a W-subtype contact binary with a mass ratio of q = 0.305(±0.008) and a fill-out factor of f = 14.4(±1.8)%. The orbital period may be undergoing a cyclic oscillation with an amplitude of A = 0.0027(±0.0001) d and a modulated period of 11.7(±0.2) yr, which may result from the light-time effect due to a third body. The lower limit on mass for the assumed component is 0.12 M⊙.Moreover, the more massive component of PS Vir may be a bit more evolved star as determined from the mass-luminosity diagram.     

LAMOST CCD camera-control system based on RTS2

The Large Sky Area Multi-Object Fiber Spectroscopic Telescope(LAMOST) is the largest existing spectroscopic survey telescope, having 32 scientific charge-coupled-device(CCD) cameras for acquiring spectra. Stability and automation of the camera-control software are essential, but cannot be provided by the existing system. The Remote Telescope System 2 nd Version(RTS2) is an open-source and automatic observatory-control system. However, all previous RTS2 applications were developed for small telescopes. This paper focuses on implementation of an RTS2-based camera-control system for the 32 CCDs of LAMOST. A virtual camera module inherited from the RTS2 camera module is built as a device component working on the RTS2 framework. To improve the controllability and robustness, a virtualized layer is designed using the master-slave software paradigm, and the virtual camera module is mapped to the 32 real cameras of LAMOST. The new system is deployed in the actual environment and experimentally tested. Finally, multiple observations are conducted using this new RTS2-frameworkbased control system. The new camera-control system is found to satisfy the requirements for automatic camera control in LAMOST. This is the first time that RTS2 has been applied to a large telescope, and provides a referential solution for full RTS2 introduction to the LAMOST observatory control system.