The Role of Laser Ranging for Calibrating Jason-1: The Corsica Tracking Campaign

The French Transportable Laser Ranging System (FTLRS), a highly transportable Satellite Laser Ranging (SLR) instrument, was set up in Corsica (from January to September 2002) for participating to the JASON-1 altimeter verification phase. In addition to the tracking of oceanographic satellite missions and in order to perform an accurate positioning, the FTLRS also acquired laser ranging data on geodetic satellites, STARLETTE and STELLA essentially.

The paper describes the analysis strategy mainly based on the use of a short-arc orbit technique to compute accurate 1 cm local orbits, and then the geocentric positioning (2–3 mm relative to GPS). Finally, we established the JASON-1 absolute calibration value, based on 9 SLR short-arcs (between cycles 1 and 26), at 108.2 ± 8.7 mm; the 10-day repeatability is of 26.1 mm showing that a great accuracy has been reached.     

Multiple dolomitization events along the Pozalagua Fault (Pozalagua Quarry,Basque–Cantabrian Basin,Northern Spain)

The Pozalagua Quarry in the Basque–Cantabrian Basin of northern Spain exposes a unique set of fault‐associated dolomites that can be studied on a decametre scale. The dolomites developed along the Pozalagua Fault system in slope‐deposited limestones of Albian age. Following marine phreatic diagenesis, the limestones were subject to meteoric karst formation. The resulting cavities were filled either by angular limestone fragments in a black clay‐rich matrix, or by cave floor/pond (now dolomitized) sediments. The subsequent diagenetic history reflects repeated periods of fracturing, fluid expulsion, dissolution and cementation. Contrasting fluid pulses resulted in the formation of a network of hydrothermal karst and the subsequent development of coarse‐crystalline calcite cement, zebra dolomite, recrystallized coarse‐crystalline dolomite, elongated blue–grey coarse‐crystalline dolomite cement in the open fault and, finally, coarse‐crystalline saddle dolomite. Decimetre‐size reworked host‐rock fragments present in the latter two dolomite phases probably reflect roof collapse fragments of a cave system that developed along the Pozalagua Fault system. However, there are also metre‐scale host‐rock fragments that apparently ‘float’ in the coarse‐crystalline saddle dolomites, implying that either fragment assimilation was a widespread process or violent expulsion of fluids occurred along the Pozalagua Fault system. The presence of pre‐dolomite and post‐dolomite stylolites, parallel to bedding, supports a linkage between the diagenetic events and the Late Albian tectonism that affected the region.     

Unique authigenic mineral assemblages reveal different diagenetic histories in two neighbouring cold‐water coral mounds on Pen Duick Escarpment,Gulf of Cadiz

Alpha Mound and Beta Mound are two cold‐water coral mounds, located on the Pen Duick Escarpment in the Gulf of Cadiz amidst the El Arraiche mud volcano field where focused fluid seepage occurs. Despite the proximity of Alpha Mound and Beta Mound, both mounds differ in their assemblage of authigenic minerals. Alpha Mound features dolomite, framboidal pyrite and gypsum, whereas Beta Mound contains a barite layer and predominantly euhedral pyrite. The diagenetic alteration of the sedimentary record of both mounds is strongly influenced by biogeochemical processes occurring at shallow sulphate methane transition zones. The combined sedimentological, petrographic and isotopic analyses of early diagenetic features in gravity cores from Alpha Mound and Beta Mound indicate that the contrast in mineral assemblages between these mounds is caused by differences in fluid and methane fluxes. Alpha Mound appears to be affected by strong fluctuations in the fluid flow, causing shifts in redox boundaries, whereas Beta Mound seems to be a less dynamic system. To a large extent, the diagenetic regimes within cold‐water coral mounds on the Pen Duick Escarpment appear to be controlled by fluid and methane fluxes deriving from layers underlying the mounds and forcings like pressure gradients caused by bottom current. However, it also becomes evident that authigenic mineral assemblages are not only very sensitive recorders of the diagenetic history of specific cold‐water coral mounds, but also affect diagenetic processes in turn. Dissolution of aragonite, lithification by precipitation of authigenic minerals and subsequent brecciation of these lithified layers may also exert a control on the advective and diffusive fluid flow within these mounds, providing a feedback mechanism on subsequent diagenetic processes.     

Hyperspectral image analysis of different carbonate lithologies (limestone,karst and hydrothermal dolomites): the Pozalagua Quarry case study (Cantabria,North‐west Spain)

Ground‐based hyperspectral imaging combined with terrestrial lidar scanning is a novel technique for outcrop analysis, which has been applied to Early and Late Albian carbonates of the Pozalagua Quarry (Cantabrian Mountains, Spain). An image processing workflow has been developed for differentiating limestone from dolomite, providing additional sedimentary and diagenetic information, and the possibility to quantitatively delineate diagenetic phases in an accurate way. Spectral absorption signatures can be linked to specific sedimentary or diagenetic products, such as recent and palaeokarst, hydrothermal karst, (solution enlarged) fractures and different dolomite types. Some of the spectral signatures are related to iron, manganese, organic matter, clay and/or water content. Ground‐truthing accessible parts of the quarry showed that the classification based on hyperspectral image interpretation was very accurate. This technique opens the possibility for quantitative data evaluation on sedimentary and diagenetic features in inaccessible outcrops. This study demonstrates the potential of ground‐based imaging spectroscopy to provide information about the chemical–mineralogical distribution in outcrops, which could otherwise not be established using conventional field methods.     

Geological investigation and optical dating of Quaternary siliciclastic sediments near Apalachicola,North‐west Florida,USA

Ground penetrating radar and single‐aliquot regenerative‐dose optically stimulated luminescence were used to determine the depositional environments and age of unconsolidated siliciclastic sediments near Apalachicola, Florida. Five direct‐push cores, five vibracores and 28 optically stimulated luminescence samples were collected, as well as 7 km of ground penetrating radar data. A new model of cosmic dose rate calculation, which removes the effect of a much younger aeolian cap, was utilized to calculate more representative optically stimulated luminescence ages. Five radar facies were identified based on reflector amplitude and orientation. The resulting data indicate that the Tertiary/Quaternary Shelly Sediments were deposited before marine isotope stage 6, the Quaternary Alluvium was deposited during marine isotope stage 6 and the Quaternary Beach Ridge and Dune was deposited during the marine isotope stage 5e sea‐level highstand, which peaked at approximately 2·5 m above present sea‐level in this area.     

Pre-vegetation alluvial fan facies and processes: an example from the Cambro-Ordovician Rozel Conglomerate Formation, Jersey, Channel Islands

Prior to the Silurian a lack of land vegetation is expected to have influenced the processes of sedimentation on alluvial fans, principally by causing increased rates of run-off and erosion in the fan catchments. In the Cambro-Ordovician Rozel Conglomerate Formation, this effect was central to the generation of alluvial fan deposits that are unusually deficient in sand and clay, despite being sourced from a catchment dominated by sandstone and mudstone. Seven facies are identified, interpreted as representing the deposits of: (i) shallow stream and sheetfloods, (ii) channelized, non-cohesive debrisflows, (iii) sub-aerial mud-rich debrisflows, (iv) sub-aqueous mud-rich debrisflows, (v) low energy streams that reworked abandoned fan sectors, (vi) a sandflat-playa lake system and (vii) talus slopes. The first two facies are both clast-supported conglomerate, comprise 98% of the deposit, and represent deposition on active depositional lobes and in the fan head trench. The remaining facies are the products of infrequent sedimentary processes, fan abandonment processes and marginal sub-environments. The facies assemblage in many ways mimics that of a modern-day, water-lain, arid region fan. However, the palaeolatitude of these fans was high and the climate is inferred to have been cool and wet. The near absence of sandstone and mudstone beds with few mudflows is ascribed to rapid hinterland uplift and high rates of erosion resulting in minimal chemical breakdown of source rocks in the catchments. Such high rates of erosion are in turn ascribed to a combination of frequent rainstorms and an absence of vegetation cover.     

SHORT COMMUNICATION DYNAMIC HEADSPACE ANALYSIS:OPTIMIZATION OF TITRATION BY EXPERIMENTAL DESIGN

The dynamic headspace titration of the volatile constituents of the black truffle(Tuber Melanosporum)isplanned to be carried out with the new gas chromatographic device DCI using Tenax trapping.In thispaper the necessary optimization of the experimental factors which influence the desorption of thevolatiles from the sample and the adsorption on the trap is carried out by experimental design.The studyof the isoresponse curves makes it possible to determine the optimum conditions for a rapid titration ofhighest sensitivity and reproducibility,avoiding water trapping.