A comparative study of some directional sea models

Current specification of the ocean wave environment for the design of offshore platforms does not adequately describe the directional nature of a real seaway. The strong wave frequency dependent nature of the directional behavior of observed seas is often over-simplified for design. A general formulation encompassing a wide range of directional sea models is presented. Parameter values used in some of the more popular directional sea models are examined. Approximate expressions for the two frequency dependent parameters in a modified Longuet-Higgins cosine wave spreading model are presented. A general procedure which allows an engineer to estimate parameters for alternate wave spreading models is discussed. To illustrate this procedure an empirically based modified cosine spreading model is used as the basis to estimate frequency dependent parameters for circular normal and wrapped Gaussian wave spreading models. A comparison of the contours of the various directional sea models and the prediction of the root-mean-square velocity distribution is presented.     

Isolation and characterisation of pristane metabolites formed in vivo by rainbow trout

Pristane (2,6,10,14 -tetramethylpentadecane) occurs ubiquitously in the marine environment. This hydrocarbon may be of biogenic or petrogenic origin.¹ Recently it has been shown that residual amounts of this branched alkane increased in marine organisms after an oil spill.^2,3 The lack of data on the fate of pristane in fish, added with the fact that this compound was considered by some authors as a non-metabolisable substance in vertebrates, including man,⁴ led us to investigate the capability of fish to metabolise pristane. In this study, urinary and fecal excretion, tissue distribution and metabolism of ³H-pristane were analysed in Salmo gairdneri R. after a single intragastric dose. In addition to unchanged hydrocarbon, various labelled compounds have been isolated and identified in liver, bile, faeces, urine and surrounding water, demonstrating that pristane was first oxidised to alcohols (pristanol and pristane-diol) and to acid (pristanic acid). The elimination of these compounds occurred in the form of conjugated products (primarily glucuronides) as well as free metabolites.     

Low-frequency damping of a moored semisubmersible obtained from simulated extinction tests and mean wave drift forces

Low-frequency damping of a moored semisubmersible drilling platform was obtained from numerical extinction tests simulated in still water and in regular waves and from mean wave drift forces calculated at zero forward speed. The influence of drag forces was represented by the modified Morison equation. The platform as used for the 18th ITTC Comparative Mooring Study was analyzed in irregular beam waves. The computed time series of sway as well as the corresponding sway response spectrum compared favourably with model test measurements, demonstrating that this procedure to determine low-frequency damping can be effective.     

Accumulation and effects of organotin compounds in oysters and mussels: Correlation with serum biochemical and cytological factors and tissue burdens

Oysters and mussels exposed to a concentration of 0·7 ppb (μg/liter) tributyltin from painted panels in flowing seawater accumulated tin in the digestive glands to comparable levels. The mussels experienced approximately 50% mortality during the 60-day test period, but the oysters suffered virtually no deaths. There was no evidence from either bivalve of elevated numbers of hemocytes during the test period and no evidence for cellular disruption as detected by increased levels of serum lysosomal hydrolases. Serum protein of exposed mussels relative to controls increased with time of exposure to the toxicant, while oyster serum protein, normally 10 x higher than in mussels, did not. No evidence was found for elevated stress proteins (heat shock proteins) or metallothioneins in the serum hemocytes of either bivalve. Responses by these animals to fatal or near fatal doses of TBT were thus very different from responses to copper that we have reported elsewhere.^1,2     

The seasonal cycle of arsenic in estuarine and nearshore waters of the South Atlantic Bight

Arsenic concentrations vary with season on the continental shelf of the South Atlantic Bight. During periods of high winds in the winter and early spring, inorganic arsenic concentrations are reduced to as little as 20% of typical open ocean concentrations by sorption onto resuspended sediments or incorporation into phytoplankton. In the early fall, arsenic sequestered in sediments in the spring is regenerated and returned to the water column, creating elevated arsenic concentrations in the nearshore zone that are up to 50% greater than open ocean concentrations. Arsenic in the adjacent estuaries is nearly conservative over the seasonal cycle, although its distribution in the estuaries is greatly affected by the seasonal changes in arsenic concentrations in the nearshore waters.     

Gravity torques for surface waves

The effects of the gravity torques acting on the angular momentum of surface gravity waves are calculated theoretically. For short crested waves the gravity torque is caused by the force of gravity on the orbiting fluid particles acting down the slopes of the crests and troughs and in the direction parallel to the crests and troughs. The gravity torque tries to rotate the angular momentum vectors, and thus the waves themselves, counterclockwise in the horizontal plane, as viewed from above, in both hemispheres. The amount of rotation per unit time is computed to be significant assuming reasonable values for the along-crest and trough slopes for waves in a storm area. The gravity torque has a frequency which is double the frequency of the waves. For long crested waves the gravity torque acts in the vertical plane of the orbit and tries to decelerate the particles when they rise and accelerate them when they fall. By disrupting the horizontal cyclostrophic balance of forces on the fluid particles (centrifugal force versus pressure force) the gravity torque accounts qualitatively for the three characteristics of breaking waves: that they break at the surface, that they break at the crest, and that the crest breaks in the direction of wave propagation.     

Sedimentology and morphodynamics of a macrotidal beach, Pendine Sands, SW Wales

The foreshore of Pendine Sands forms the seaward part of an extensive, sandy coastal barrier in a shallow Carmarthen Bay, SW Wales. The sedimentological features of the macrotidal foreshore reflect a tide-induced modification of nearshore wave characteristics. As the tide ebbs, the breaker height may decrease, the surf zone widens and becomes increasingly dissipative, and swash/backwash velocities diminish. A concomitant change from plunging to spilling breakers and increasingly symmetrical swash zone flows are associated with a decreasing beach gradient.

A zero net transport model demonstrates that the beach profile is self-stabilising in the short-term, and periodic levelling has shown that the beach is in long-term equilibrium with prevailing conditions, though this does not preclude a significant dynamic response to changing tides and waves.

The flow regimes of wave-generated currents decline as the tide ebbs, and normal beach processes do not usually affect the lower foreshore. Accordingly, there is an overall seaward-fining of the primary framework component of the sands. In more detail, this framework component displays a slight seaward-coarsening across an upper foreshore dominated by high water swash and surf; a rapid seaward-fining across the mid-foreshore in response to the ebb-attenuating swash zone flow velocities; and a slight seaward-fining across the lower foreshore under the action of nearshore shoaling waves. Bedforms vary from a swash/backwash emplaced flat bed across the upper foreshore to the small ripples of nearshore asymmetric oscillatory flows across the lower foreshore.

The surface sediment veneer is not representative of the subsurface sediments which form in response partly to fairweather conditions, partly to storms. The upper foreshore is characterised by swash/backwash emplaced plane bedding in fine sands frequently disrupted by bubble cavities. The mid-foreshore is composed of coarser-grained shelly traction clogs arranged as landward- and seaward-dipping large-scale cross bedding and/or plane bedding; these are probably storm breaker/surf deposits. The lower foreshore, though partially and sometimes totally bioturbated, shows landward-dipping small-scale cross bedding in very fine sands sorted by nearshore shoaling waves.

Tide- and storm-induced modification of the nearshore flow regimes therefore produces a distinctive shore-normal array of sedimentary facies. Each facies is characterised by diagnostic textural and structural signatures. A prograding sequence of such macrotidal deposits would be similar to, but more extensive than, a comparable microtidal sequence.     

Virgin rock temperatures from well logs — accuracy analysis for some advanced inversion models

Temperature data from 18 measurement series obtained during logging of the Oseberg field in the northern North Sea are presented. Because the measurement series are taken at approximately the same depth, they should give identical temperatures after depth correction, and are suitable for assessing the performance of different models used to determine virgin rock temperatures from well log information.We have used this data set to test the properties of the different models given by Shen and Beck (1986). Although these models were built to simulate closely the thermal recovery of a well and are unbiased, the uncertainties in the temperature estimates when applied to real data are found to be no less than those from simpler (biased) models. This fact confirms the conclusion of Hermanrud (1989a) who showed that physical factors other than those presently accounted for significantly influence the thermal recovery of a borehole.