Assessment of cement’s dust impact on the soil using principal component analysis and GIS

To evaluate the impact of the cement’s dust emitted by the eastern Moroccan cement factory (Oujda Holcim) and deposited on the soil of the Ain Lahjar commune, 58 samples of soil were collected around the factory on a radius of 3 km approximately. The physicochemical analyses of the upper 3 cm of the soil surface samples correspond to the pH, electrical conductivity, the chlorides and the oxides of Ca, Al, Fe, K, Mn, S and Si which were analyzed by the fluorescence of X-rays. The preliminary results demonstrate that this dust are especially basic and contain a high free lime (43% CaO). The principal component analysis (applied on the 58 samples of soil) allows deducting that the free lime and the sulfur oxide are the tracer elements of this form of pollution. Furthermore, the spatial projection of the factor scores of the principal component analysis using the geographical information system permits to determine the spatial distribution of more polluted areas of soils as well as to estimate their surface (63.3% of the survey zone).     

Cross inoculation studies: Response of Vigna mungo to inoculation with rhizobia from tree legumes growing under arid Environment

Cross-inoculation experiments were conducted in the greenhouse to test the rhizobia isolated from nodules of seven tree legumes for their effectiveness in Vigna mungo plants. The tree legumes included Albizia lebbeck, Dalbergia sissoo, Leucaena leucocephala, Pithecellobium dulce, Prosopis cineraria, Prosopis glandulosa and Prosopis juliflora, all growing under arid environment. Rhizobia from these legumes formed nodules on the roots of Vigna mungo except isolates from Albizia lebbeck. Dry weight and nitrogen contents of Vigna mungo plants increased significantly (P<0.05) in response to cross inoculation as compared to uninoculated control. Rhizobia from Leucaena leucocephala and Prosopis glandulosa showed significant increase in dry weight (P<0.05) and nitrogen contents (P<0.05) than other inoculated treatments. The natural rhizobia of wild tree legumes growing under arid environment show higher tolerance to prevailing adverse conditions like salt stress, elevated temperatures and drought. These rhizobia may be used to inoculate wild as well as crop legumes cultivated in reclaimed desert lands. These rhizobia may have specific traits that can be transferred to other rhizobia through genetic engineering tools. The cross infection of agriculturally important legumes with isolates from wild legumes may prove a useful means of increasing nitrogen contents within these plants.     

Bioaccumulation of heavy metals in organs of fresh water fish Cyprinus carpio (Common carp)

The objective of the present study is to determine the bioaccumulation of heavy metals in various organs of the fresh water fish exposed to heavy metal contaminated water system. The experimental fish was exposed to Cr, Ni, Cd and Pb at sublethal concentrations for periods of 32 days. The elements Cd, Pb, Ni and Cr were assayed using Shimadzu AA 6200 atomic absorption spectrophotometery and the results were given as μ/g dry wt. The accumulation of heavy metal gradually increases in liver during the heavy metal exposure period. All the results were statistically significant at p < 0.001. The order of heavy metal accumulation in the gills and liver was Cd > Pb > Ni > Cr and Pb > Cd > Ni > Cr. Similarly, in case of kidney and flesh tissues, the order was Pb > Cd > Cr > Ni and Pb > Cr > Cd > Ni. In all heavy metals, the bioaccumulation of lead and cadmium proportion was significantly increased in the tissues of Cyprinus carpio (Common carp).     

Application of an environmentally optimum cooling water system design in water and energy conservation

Recirculating cooling water systems are consist of a cooling tower and heat-exchanger network which conventionally have a parallel configuration. However, reuse of water between different cooling duties enables cooling water networks to be designed with series arrangements. This will results in performance improvement and increased cooling tower capacity. Research on recirculating cooling water systems has mostly focused on the individual components. However, a particular design method represented by Kim and Smith accounts for the whole system interactions. In this study, the Kim and Smith design method is expanded and a comprehensive simulation model of recirculating cooling system was developed to account for the interaction between the cooling tower performance and the heat-exchanger network configuration. Regarding this model and considering cycle water quality through introducing ozone treatment technology, a modern methodology of recirculating cooling water system design was established and developed. This technique, called the integrated ozone treatment cooling system design, is a superior designed tool based on pinch analysis and mathematical programing. It also ensures maximum water and energy conservation, minimum cost and environmental impacts. Related coding in MATLAB version 7.3 was used for the illustrative example to get optimal values in cooling water design method computations. The result of the recently introduced design methodology was compared with the Kim and Smith design method.     

Transient and spatial modeling and simulation of polybrominated diphenyl ethers reaction and transport in air, water and soil

The release of the wastes containing polybrominated diphenyl ethers into the environment is a worldwide major concern. Investigation of spatial and temporal variations of polybrominated diphenyl ethers concentrations due to different factors, especially the transport of these species between air and water as well as between air and soil is the purpose of present research. A model was developed and solved using the methods of finite difference and lines. Simulations were implemented for three dimensions of width, length, and height and also time for the air compartment, whereas for the soil and water compartments, variations were considered only with respect to height and time. Transport between water and soil was disregarded for simplicity at this stage. Vancouver’s landfill was considered as a case study. Lower concentrations in air and higher concentrations in water at the interface show that these pollutants tend to diffuse from air to water. Concentrations of all four pollutants decrease near the interface in soil as time passes, but they are predicted to be almost constant at other levels.     

Ability of indigenous Bacillus licheniformis and Bacillus subtilis in microbial enhanced oil recovery

Microbially produced lipopeptide have been isolated and studied for microbial enhanced oil recovery. About 60 gram positive bacteria isolated from soil contaminated with crude oil, near the crude oil storage tank in Tehran Refinery, Tehran, Iran. However, most of these studies have produced lipopeptide by one of the pure-culture microbes isolated in a laboratory. Among the isolates, heamolytic tests revealed two biosurfactant producers. The isolated strains were designated as C2, E1. By using morphological, biochemical and molecular biology tests (16 SrRNA), the strains identified as Bacillus licheniformis and Bacillus subtitlis, respectively. Emulsification activity and measurement of surface tension indicated that, the isolates were high producers of biosurfactant. The product of C2 and E1 is mainly lipopeptide. This product reduce surface tension from 65 to 30 mN/m. Emulsified activity of crude oil was 92% for C2 and 90 % in case of E1. This is the first report of indigenous Bacillus licheniformis and Bacillus subtilis from a soil contaminated with oil in an Iranian refinery with ability to produce biosurfactant.     

Influence of biotic-abiotic factors on the degradation of novaluron in tropical soil

In this study, the degradation of novaluron (benzoylphenyl urea insect growth regulator) was investigated under controlled laboratory conditions in clay loam alluvial and coastal saline soils of West Bengal, India. The application rates were field rate (FR); 2FR and 10FR. The incubation study was carried out at 30 °C and 60% of maximum water holding capacity of both the soils. Degradation of novaluron in both the soils followed first order reaction kinetics at all application rates under non-sterile and sterile conditions. The half-lives of novaluron in non-sterilized soils ranged from 17.0–17.8 days (alluvial soil) and 11.4–12.7 days (coastal saline soil), while the values in case of the sterilized soils were 53.7–59.0 days (alluvial soil) and 28.9–29.8 days (coastal saline soil) respectively. The novaluron degradation patterns were found to be highly influenced by soil types, application rates, and biotic abiotic factors. Abiotic factors strongly influenced novaluron degradation in both the soils. Biotic degradation was higher in alluvial soil compared to the coastal saline soil.     

Modeling study of the effects of the coagulation kernel with van der Waals forces and turbulence on the particle size distribution

In this study, variations in the size distributions due to different assumptions for the coagulation kernel are investigated. In order to evaluate how the coagulation kernel influences the form of the particle size distribution and to describe the process of the Brownian coagulation, the Brownian coagulation kernel, including the van der Waals forces, is compared with the most frequently used coagulation coefficients. Retardation should be considered for interparticle interactions for particles larger than 1μm radius. However, for particle sizes larger than 0.1 μm, the Brownian kernel is not dominant, so the retardation effect can be ignored. The inclusion of the van der Waals forces in the Brownian coagulation kernel caused a faster coagulation process in the small particle size range. Taking account of the turbulent coagulation kernel, the turbulent coagulation kernel becomes more important when the turbulent intensity is higher. The turbulent coagulation kernel affects the large particle size range and ignoring the turbulent coagulation kernel will lead to overestimation of particle number concentration in model simulation. The results of this study indicate that the inclusion of van der Waals forces or the turbulent coagulation kernel in the total coagulation kernel impacts on the modeled particle size distributions and total particle number concentration.     

A combined mathematical geophysical model for prediction of pyrite oxidation and pollutant leaching associated with a coal washing waste dump

The waste produced by coal washing process produces many environmental problems. In this study, the pollution problems associated with the waste produced by Alborz Sharghi Coal Washing Plant was investigated by mathematical modeling. The study area is located at 11 km. to Razmjah coal region and 45 km. to Tehran-Mashhad road in the north part od Iran. To achieve the goal, a few samples were taken from different depths at three points on the waste dump in order to investigate pyrite oxidation and pollution generation. The samples were then analysed, using an AA-670 Shimadzu atomic absorption to determine the fraction of pyrite remained within the waste particles. A numerical finite volume model using Phoenics package has been developed to simulate pyrite oxidation and pollution generation from the Alborz Sharghi coal washing waste dump. The pyrite oxidation reaction is described by the shrinking-core model. Gaseous diffusion is the main mechanism for the transport of oxygen through the waste. The results of numerical modelling were compared with the field observations and close agreement was achieved. A simple mathematical model incorporating advection and hydrodynamic dispersion processes was also presented in order to verify the results of geophysical time-laps method showing transportation of the pollutants through the downstream of the waste dump. Both mathematical model and geophysical time-laps method are agreed in the identification of pollutant transport emanated from the waste dump. The results of such investigations can be used for designing an effective environmental management program.     

Geochemistry of magmatic rocks of the Koksharovka alkaline-ultrabasic massif,primorye, and results of trace-element modeling

New geochemical data are presented on the magmatic rocks of the Late Jurassic Koksharovka alkaline-ultrabasic massif, which is associated with deposits of vermiculite, apatite, V-bearing titanomagnetite, and placer isoferroplatinum. The REE geochemistry and strontium, oxygen, and carbon isotopic composition of carbonatites and related ijolites and pyroxenites, together with geological observations, point to the magmatic origin of the Koksharovka carbonatites. The origin of associated magmatic rocks is discussed. Trace element modeling of partial melting of mantle sources was conducted to decipher the genesis of the melts of the Koksharovka carbonatites and host titanite-kaersutite pyroxenites.