Fluid generation and evolution during exhumation of deeply subducted UHP continental crust: Petrogenesis of composite granite–quartz veins in the Sulu belt,China

Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The ε_Hf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ¹⁸O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H₂O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H₂O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H₂O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.     

The WOCE-era 3-D Pacific Ocean circulation and heat budget

To address questions concerning the intensity and spatial structure of the three-dimensional circulation within the Pacific Ocean and the associated advective and diffusive property flux divergences, data from approximately 3000 high-quality hydrographic stations collected on 40 zonal and meridional cruises have been merged into a physically consistent model. The majority of the stations were occupied as part of the World Ocean Circulation Experiment (WOCE), which took place in the 1990s. These data are supplemented by a few pre-WOCE surveys of similar quality, and time-averaged direct-velocity and historical hydrographic measurements about the equator.An inverse box model formalism is employed to estimate the absolute along-isopycnal velocity field, the magnitude and spatial distribution of the associated diapycnal flow and the corresponding diapycnal advective and diffusive property flux divergences. The resulting large-scale WOCE Pacific circulation can be described as two shallow overturning cells at mid- to low latitudes, one in each hemisphere, and a single deep cell which brings abyssal waters from the Southern Ocean into the Pacific where they upwell across isopycnals and are returned south as deep waters. Upwelling is seen to occur throughout most of the basin with generally larger dianeutral transport and greater mixing occurring at depth. The derived pattern of ocean heat transport divergence is compared to published results based on air–sea flux estimates. The synthesis suggests a strongly east/west oriented pattern of air–sea heat flux with heat loss to the atmosphere throughout most of the western basins, and a gain of heat throughout the tropics extending poleward through the eastern basins. The calculated meridional heat transport agrees well with previous hydrographic estimates. Consistent with many of the climatologies at a variety of latitudes as well, our meridional heat transport estimates tend toward lower values in both hemispheres.     

Combining Geography,Math, and Science to Teach Climate Change and Sea Level Rise

This study examines the effectiveness of integrating geography into existing math and science curriculum to teach climate change and sea level rise. The desired outcome is to improve student performance in all three subjects. A sample of 120 fifth graders from three schools were taught the integrated curriculum over a period of two to three weeks. They were given a pretest and posttest comprised of questions measuring knowledge relevant to the lesson in terms of geography, math, science, and spatial skills. Paired-samples t-tests were conducted to determine significant differences in student performance. These t-tests indicate statistically significant improvements in all but one instance across all subjects, at all schools for both boys and girls. No statistically significant results were observed for a control group of an additional twenty-seven fifth graders. These results demonstrate the value of combining geography with math and science to improve student performance in STEM knowledge.     

Use of cartographic images by expert and novice field geologists in planning fieldwork routes

Topographic maps and aerial photographs are particularly useful when geoscientists are faced with fieldwork tasks such as selecting paths for observation, establishing sampling schemes, or defining field regions. These types of images are crucial in bedrock geologic mapping, a cognitively complex field-based problem-solving task. Geologic mapping requires the geologist to correctly identify rock types and three-dimensional bedrock structures from often partial or poor-quality outcrop data while navigating through unfamiliar terrain. This paper compares the walked routes of novice to expert geologists working in the field (n = 66) with the results of a route planning and navigation survey of a similar population of geologists (n = 77). Results show clearly that those geologists with previous mapping experience make quick and decisive determinations about field areas from available imagery and maps, regardless of whether they are or not physically present in the field area. Recognition of geologic features enabled experts to form and verbalize a specific plan for travel through a landscape based on those features. Novices were less likely to develop specific travel route plans and were less likely to identify critical landscape cues from aerial photographs.     

Pliocene and late Pleistocene (MIS 5e) decapod crustaceans from Santa Maria Island (Azores Archipelago: Central Atlantic): systematics,palaeoecology and palaeobiogeography

The presence of decapod crustaceans in the Pliocene and Pleistocene (MIS 5e) fossil record of Santa Maria Island (Azores Archipelago) is herein reviewed. Our study raises the number of fossil decapods from this island from one species to 10 taxa (three for the Pliocene and seven for the Last Interglacial). Four of these 10 taxa are reported for the first time in the fossil record, worldwide. A new species of a mud shrimp is also described (Upogebia azorensis n. sp.). Our study suggests that the Plio–Pleistocene decapod assemblages of the Azores did not differ significantly from modern ones, being dominated by species that are today widespread across the Webbnesia ecoregion, the Mediterranean Sea, and the eastern Atlantic shores, including the Azores. As far as can be judged from the limited fossil record, apparently no tropical crab species with a Cabo Verdean/Senegalese provenance reached the Azores during windows of opportunity associated with Glacial Termination 2 or with the initial setting of the Last Interglacial period. This contribution increases the total number of marine taxa reported for the Pliocene and Pleistocene outcrops of Santa Maria Island to 218 and 155, respectively, highlighting the scientific relevance of its palaeontological heritage.     

Partial melting in the Inzie Head gneisses: the role of water and a petrogenetic grid in KFMASH applicable to anatectic pelitic migmatites

A sequence of prograde isograds is recognized within the Dalradian Inzie Head gneisses where pelitic compositions have undergone variable degrees of partial melting via incongruent melting reactions consuming biotite. Three leucosome types are identified. At the lowest grades, granitic leucosomes containing porphyroblasts of cordierite (CRD‐melt) are abundant. At intermediate grades, CRD‐melt mingles with garnetiferous leucosomes (GT‐melt). At the highest grades, CRD‐melt coexists with orthopyroxene‐bearing leucosomes (OPX‐melt), while garnet is conspicuously absent. The prograde metamorphic field gradient is constrained to pressures of 2–3 kbar below the CRD‐melt isograd, and no greater than 4.5 kbar at the highest grade around Inzie Head. A petrogenetic grid, calculated using thermocalc , is presented for the K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (KFMASH) system for the phases orthopyroxene, garnet, cordierite, biotite, sillimanite, H₂O and melt with quartz and K‐feldspar in excess. For the implied field gradient, the reaction sequence predicted by the grid is consistent with the successive prograde development of each leucosome type. Compatibility diagrams suggest that, as anatexis proceeded, bulk compositions may have been displaced towards higher MgO content by the removal of (relatively) ferroan granitic leucosome. An isobaric (P = 4 kbar) T–a_H2O diagram shows that premigmatization fluids must have been water‐rich (a_H2O > 0.85) and suggests that, following the formation of small volumes of CRD‐melt, the system became fluid‐absent and melting reactions buffered a_H2O to lower values as temperatures rose. GT‐ and OPX‐melt formed by fluid‐absent melting reactions, but a maximum of 7–11% CRD‐melt fraction can be generated under fluid‐absent conditions, much less than the large volumes observed in the field. There is strong evidence that the CRD‐melt leucosomes could not have been derived by buoyantly aided upwards migration from levels beneath the migmatites. Their formation therefore required a significant influx of H₂O‐rich fluid, but in a quantity insufficient to have exhausted the buffering capacity of the solid assemblage plus melt. Fluid : rock ratios cannot have exceeded 1 : 30. The fluid was channelled through a regionally extensive shear zone network following melt‐induced failure. Such an influx of fluid at such depths has obvious consequences for localized crustal magma production and possibly for cordierite‐bearing granitoids in general.     

Molecular simulations of metal adsorption to bacterial surfaces

The atomic-scale interactions that occur between cations and the metal-binding cell wall components common to many gram-positive bacteria were investigated using molecular simulations techniques. We examined the adsorption of Cd and Pb onto peptidoglycan and teichoic acid components of the bacterial cell wall using classical energy force field methods. Within the framework of molecular mechanics and the Cerius² modeling software, we used energy minimization, conformational analysis, and molecular dynamics to examine the different components of the cell wall and to determine relative binding energies and structural configurations of the cell wall components, both with and without the metals present. Electronic structure calculations of representative metal-organic complexes validate the more practical classical methods required in simulating the large number of atoms associated with the cell wall components. The classical force field simulations were conducted in both gas phase and solvated periodic cells. Force field-based simulation techniques can adequately describe the interactions of Cd with the cell wall, defining both metal ion coordinations and binding distances. However, the classical force field approach is inconsistent in describing the observed Pb-cell wall interactions due to possible limitations in the force field parameters, the propensity for Pb to form hydroxides at circumneutral pH, or the dominance of other adsorption mechanisms.     

Heat capacity, entropy, and magnetic properties of jarosite-group compounds

Jarosite phases are common minerals in acidic, sulfate-rich environments. Here, we report heat capacities (C _p) and standard entropies (S°) for a number of jarosite samples. Most samples are close to the nominal composition AFe₃(SO₄)₂(OH)₆, where A = K, Na, Rb, and NH₄. One of the samples has a significant number of defects on the Fe sites and is called the defect jarosite; others are referred to as A-jarosite. The samples, their compositions, and the entropies at T = 298.15 K are:

A Middle Miocene carbonate embankment on an active volcanic slope: Ilhéu de Baixo,Madeira Archipelago,Eastern Atlantic

Carbonate factories on insular oceanic islands in active volcanic settings are poorly explored. This case study illuminates marginal limestone deposits on a steep volcanic flank and their recurring interruption by deposits linked to volcaniclastic processes. Historically known as Ilhéu da Cal (Lime Island), Ilhéu de Baixo was separated from Porto Santo, in the Madeira Archipelago, during the course of the Quaternary. Here, extensive mines were tunnelled in the Miocene carbonate strata for the production of slaked lime. Approximately 10 000 m³ of calcarenite (−1 to 1ø) was removed by hand labour from the Blandy Brothers mine at the south end of the islet. Investigations of two stratigraphic sections at opposite ends of the mine reveal that the quarried material represents an incipient carbonate ramp developed from east to west and embanked against the flank of a volcanic island. A petrographic analysis of limestones from the mine shows that coralline red algae from crushed rhodoliths account for 51% of all identifiable bioclasts. This material was transported shoreward and deposited on the ramp between normal wave base and storm wave base at moderate depths. The mine's roof rocks are formed by Surtseyan deposits from a subsequent volcanic eruption. Volcaniclastic density flows also are a prevalent factor interrupting renewed carbonate deposition. These flows arrived downslope from the north and gradually steepened the debris apron westwards. Slope instability is further shown by a coral rudstone density flow that followed from growth of a coral reef dominated by Pocillopora madreporacea (Lamarck), partial reef collapse, and transport from a more easterly direction into a fore‐reef setting. The uppermost facies represents a soft bottom at moderate depths in a quiet, but shore‐proximal setting. Application of this study to a broader understanding of the relationship between carbonate and volcaniclastic deposition on oceanic islands emphasizes the susceptibility of carbonates to dilution and complete removal by density flows of various kinds, in contrast to the potential for preservation beneath less‐disruptive Surtseyan deposits. Copyright © 2013 John Wiley & Sons, Ltd.