The aging of gypsum in underground mines

The aging properties of gypsum extracted from two underground mines in France (Livry–Gargan and Grozon) have been highlighted by means of observation performed using scanning electron microscopy on samples taken along horizontal boreholes drilled through to the middle of several pillars. The aging process is exhibited by the presence of traces of dissolution (edges of the dissolved crystals, corroded crystalline surfaces, important intra- and intercrystalline space). These dissolution figures decrease in number and in intensity from the wall heading towards the middle of the pillar. The “older” pillars display a greater number of dissolution traces than the “more recent” pillars. Then, the role of the aging has been assessed by determining various physical and mechanical parameters on cylindrical samples of 38 mm in diameter and 76 mm in height, machined from the set of drilled boreholes. The following parameters have been quantified: density, grains density, total porosity, porosity accessible to water, intrinsic permeability to nitrogen, velocity of ultrasonic compression and shear waves, dynamic Young's modulus, dynamic Poisson's ratio, uniaxial compressive strength and static Young's modulus. Significant variations in parameter values between the wall and the middle of the pillar were recorded and recognized as being strongly correlated with the intensity of dissolution traces, and hence with gypsum aging.     

Toward an early warning system for dengue prevention: modeling climate impact on dengue transmission

Dengue fever is the most prevalent mosquito-borne viral disease of humans in tropical lands. As an efficient vaccine is not yet available, the only means to prevent epidemics is to control mosquito populations. These are influenced by human behavior and climatic conditions and thus, need constant effort and are very expansive. Examples of succeeded prevention are rare because of the continuous reintroduction of virus or vector from outside, or growing resistance of mosquito populations to insecticides. Climate variability and global warming are other factors which may favour epidemics of dengue. During a pilot study in Claris EC project, a model for the transmission of dengue was built, to serve as a tool for estimating the risk of epidemic transmission and eventually forecasting the risk under climatic change scenarios. An ultimate objective would be to use the model as an early warning system with meteorological forecasts as input, thus allowing better decision making and prevention.     

Achieving a more realistic assessment of rockfall hazards by coupling three‐dimensional process models and field‐based tree‐ring data

Sound knowledge of the spatial and temporal patterns of rockfalls is fundamental for the management of this very common hazard in mountain environments. Process‐based, three‐dimensional simulation models are nowadays capable of reproducing the spatial distribution of rockfall occurrences with reasonable accuracy through the simulation of numerous individual trajectories on highly‐resolved digital terrain models. At the same time, however, simulation models typically fail to quantify the ‘real’ frequency of rockfalls (in terms of return intervals). The analysis of impact scars on trees, in contrast, yields real rockfall frequencies, but trees may not be present at the location of interest and rare trajectories may not necessarily be captured due to the limited age of forest stands. In this article, we demonstrate that the coupling of modeling with tree‐ring techniques may overcome the limitations inherent to both approaches. Based on the analysis of 64 cells (40 m × 40 m) of a rockfall slope located above a 1631‐m long road section in the Swiss Alps, we illustrate results from 488 rockfalls detected in 1260 trees. We illustrate that tree impact data cannot only be used (i) to reconstruct the real frequency of rockfalls for individual cells, but that they also serve (ii) the calibration of the rockfall model Rockyfor3D, as well as (iii) the transformation of simulated trajectories into real frequencies. Calibrated simulation results are in good agreement with real rockfall frequencies and exhibit significant differences in rockfall activity between the cells (zones) along the road section. Real frequencies, expressed as rock passages per meter road section, also enable quantification and direct comparison of the hazard potential between the zones. The contribution provides an approach for hazard zoning procedures that complements traditional methods with a quantification of rockfall frequencies in terms of return intervals through a systematic inclusion of impact records in trees. Copyright © 2014 John Wiley & Sons, Ltd.     

Plate kinematics, origin and tectonic emplacement of supra-subduction ophiolites in SE Asia

A unique feature of the Circum Pacific orogenic belts is the occurrence of ophiolitic bodies of various sizes, most of which display petrological and geochemical characteristics typical of supra-subduction zone oceanic crust. In SE Asia, a majority of the ophiolites appear to have originated at convergent margins, and specifically in backarc or island arc settings, which evolved either along the edge of the Sunda (Eurasia) and Australian cratons, or within the Philippine Sea Plate. These ophiolites were later accreted to continental margins during the Tertiary. Because of fast relative plate velocities, tectonic regimes at the active margins of these three plates also changed rapidly. Strain partitioning associated with oblique convergence caused arc-trench systems to move further away from the locus of their accretion. We distinguish “relatively autochthonous ophiolites” resulting from the shortening of marginal basins such as the present-day South China Sea or the Coral Sea, and “highly displaced ophiolites” developed in oblique convergent margins, where they were dismantled, transported and locally severely sheared during final docking. In peri-cratonic mobile belts (i.e. the Philippine Mobile Belt) we find a series of oceanic basins which have been slightly deformed and uplifted. Varying lithologies and geochemical compositions of tectonic units in these basins, as well as their age discrepancies, suggest important displacements along major wrench faults.We have used plate tectonic reconstructions to restore the former backarc basins and island arcs characterized by known petro-geochemical data to their original location and their former tectonic settings. Some of the ophiolites occurring in front of the Sunda plate represent supra-subduction zone basins formed along the Australian Craton margin during the Mesozoic. The Philippine Sea Basin, the Huatung basin south of Taiwan, and composite ophiolitic basements of the Philippines and Halmahera may represent remnants of such marginal basins. The portion of the Philippine Sea Plate carrying the Taiwan–Philippine arc and its composite ophiolitic/continental crustal basement might have actually originated in a different setting, closer to that of the Papua New Guinea Ophiolite, and then have been displaced rapidly as a result of shearing associated with fast oblique convergence.     

Interrogating the time and processes of development of the Las Liebres rock glacier,central Chilean Andes,using a numerical flow model

The Las Liebres rock glacier is a large (~2.2 km long) Andean rock glacier whose internal composition and kinematics are known from previous studies. We investigate its development by posing and testing the following null hypothesis: the rock glacier has developed from a constant supply of debris and ground ice in periglacial conditions and resulting creep of the ice‐rock mixture. A rheological model was formulated based on recent advances in the study of ice‐rock mixture rheology, and calibrated on the known surface velocities and internal composition of the rock glacier. We show that the rock glacier viscosity is inversely related to both water and debris fractions, in agreement with recent field and theoretical studies of ice‐rock mixture rheology. Taking into account the possible variations in water fraction, the model was used to estimate the time spans of development (0.91–7.11 ka), rates of rock wall retreat (0.44–4.18 mm/a), and rates of ground ice formation (0.004–0.026 m/a) for the rock glacier. These results support the null hypothesis of a periglacial origin of the Las Liebres rock glacier. Copyright © 2016 John Wiley & Sons, Ltd.     

Late Pleistocene (MIS 3–4) climate inferred from micromammal communities and δO of rodents from Les Pradelles,France

The middle Paleolithic stratigraphic sequence of Les Pradelles (Charente, France) spans from the end of Marine Isotope Stage (MIS) 4 until the middle of MIS 3. Micromammal remains are present in all the stratigraphic levels, offering a rare opportunity to address the questions of both environmental and climatic fluctuations throughout this period. Climate modes were studied through the taphonomy, biodiversity and oxygen isotope compositions of phosphate (δ¹⁸O_p) from 66 samples of rodent tooth enamel. The δ¹⁸O_p values from the lower sedimentary levels provide summer mean air temperatures of 19 ± 2°C (level 2/1) and of 16 ± 2°C (levels 2A, 2B and 4A). Within the middle of sequence (level 4B), a paleobiodiversity change can be identified with an increase of Dicrostonyx torquatus, which is associated with the largest amplitude in δ¹⁸O_p values and the highest maximal δ¹⁸O_p values. At the top of the sequence (level 5-2), a biodiversity change is observed with the increase of Microtus arvalis, but without any change in δ¹⁸O_p values. The association of cold rodent species with unexpected high and large amplitudes in the δ¹⁸O_p values of their teeth, possibly indicative of aridity, suggests their deposition during a Heinrich event.     

Benthic remineralization at the land–ocean interface: A case study of the Rhône River (NW Mediterranean Sea)

Biogeochemical processes in sediments under the influence of the Rhône River plume were studied using both in situ microelectrodes and ex situ sediment core incubations. Organic carbon (OC) and total nitrogen (TN) content as well as stable carbon isotopic composition of OC (δ¹³C_OC) were analysed in 19 surface sediments to determine the distribution and sources of organic matter in the Rhône delta system. Large spatial variations were observed in both the total O₂ uptake (5.2 to 29.3 mmol m⁻² d⁻¹) and NH₄⁺ release (−0.1 to −3.5 mmol m⁻² d⁻¹) rates at the sediment–water interface. The highest fluxes were measured near the Rhône River mouth where sedimentary OC and TN contents reached 1.81% and 0.23% respectively. Values of δ¹³C_OC ranged from −26.83‰ to −23.88‰ with a significant seawards enrichment tracing the dispersal of terrestrial organic matter on the continental shelf. The amount of terrestrial-derived OC reaches 85% in sediments close to the Rhône mouth decreasing down to 25% in continental shelf sediments. On the prodelta, high terrestrial OC accumulation rates support high oxygen uptake rates and thus indicating that a significant fraction of terrestrial OC is remineralized. A particulate organic carbon (POC) mass balance indicates that only 3% of the deposited POC is remineralized in prodelta sediments while 96% is recycled on the continental shelf. It was calculated that a large proportion of the Rhône POC input is either buried (52%) or remineralized (8%), mostly on the prodelta area. The remaining fraction (40%) is either mineralized in the water or exported outside the Rhône delta system in dissolved or particulate forms.     

Recent contributions of geotechnical centrifuge modelling to the understanding of jack-up spudcan behaviour

The paper presents an overview of the recent contributions of centrifuge modelling to the understanding of soil-structure interaction and the development of design and predictive methods in the field of mobile jack-up drilling rig foundations. Both advantages and limitations of the centrifuge methods are detailed and key examples are presented. The benefits provided by centrifuge modelling to the development of analysis methods that are now being used within the jack-up industry are highlighted. To conclude, industry trends and research opportunities are discussed, as is the possible role of the geotechnical centrifuge in finding solutions to these new needs.     

Analysis of Radionuclide Releases from the Fukushima Dai-ichi Nuclear Power Plant Accident Part II

The present part of the publication (Part II) deals with long range dispersion of radionuclides emitted into the atmosphere during the Fukushima Dai-ichi accident that occurred after the March 11, 2011 tsunami. The first part (Part I) is dedicated to the accident features relying on radionuclide detections performed by monitoring stations of the Comprehensive Nuclear Test Ban Treaty Organization network. In this study, the emissions of the three fission products Cs-137, I-131 and Xe-133 are investigated. Regarding Xe-133, the total release is estimated to be of the order of 6 × 10¹⁸ Bq emitted during the explosions of units 1, 2 and 3. The total source term estimated gives a fraction of core inventory of about 8 × 10¹⁸ Bq at the time of reactors shutdown. This result suggests that at least 80 % of the core inventory has been released into the atmosphere and indicates a broad meltdown of reactor cores. Total atmospheric releases of Cs-137 and I-131 aerosols are estimated to be 10¹⁶ and 10¹⁷ Bq, respectively. By neglecting gas/particulate conversion phenomena, the total release of I-131 (gas + aerosol) could be estimated to be 4 × 10¹⁷ Bq. Atmospheric transport simulations suggest that the main air emissions have occurred during the events of March 14, 2011 (UTC) and that no major release occurred after March 23. The radioactivity emitted into the atmosphere could represent 10 % of the Chernobyl accident releases for I-131 and Cs-137.