Till‐forming processes beneath parts of the Cordilleran Ice Sheet,British Columbia,Canada: macroscale and microscale evidence and a new statistical technique for analysing microstructure data

This paper presents the first integrated macroscale and microscale examination of subglacial till associated with the last‐glacial (Fraser Glaciation) Cordilleran Ice Sheet (CIS). A new statistical approach to quantifying till micromorphology (multivariate hierarchical cluster analysis for compositional data) is also described and implemented. Till macrostructures, macrofabrics and microstructures support previous assertions that primary till in this region formed through a combination of lodgement and deformation processes in a temperate subglacial environment. Macroscale observations suggest that subglacial environments below the CIS were probably influenced by topography, whereby poor drainage of the substrate in topographically constricted areas, or on slopes adverse to the ice‐flow direction at glacial maximum, facilitated ductile deformation of the glacier bed. Microscale observations suggest that subglacial till below the CIS experienced both ductile and brittle deformation, including grain rotation and squeeze flow of sediment between grains under moist conditions, and microshearing, grain stacking and grain fracturing under well‐drained conditions. Macroscale observations suggest that ductile deformation events were probably followed by brittle deformation events as the substrate subsequently drained. The prevalence of ductile‐type microstructures in most till exposures investigated in this study suggests that ductile deformation signatures can be preserved at the microscale after brittle deformation events that result in larger‐scale fractures and shear structures. It is likely that microscale ductile deformation can also occur within distributed shear zones during lodgement processes. Cluster analysis of microstructure data and qualitative observations made from thin sections suggest that the relative frequency of countable microstructures in this till is influenced by topography in relation to ice‐flow direction (bed drainage conditions) as well as by the frequency and distribution of voids in the till matrix and skeletal grain shapes.     

Apatite-hosted melt inclusions from the Panzhihua gabbroic-layered intrusion associated with a giant Fe–Ti oxide deposit in SW China: insights for magma unmixing within a crystal mush

The ～?2-km-thick Panzhihua gabbroic-layered intrusion in SW China is unusual because it hosts a giant Fe–Ti oxide deposit in its lower zone. The deposit consists of laterally extensive net-textured and massive Fe–Ti oxide ore layers, the thickest of which is ～?60 m. To examine the magmatic processes that resulted in the Fe enrichment of parental high-Ti basaltic magma and the formation of thick, Fe–Ti oxide ore layers, we carried out a detailed study of melt inclusions in apatite from a ～?500-m-thick profile of apatite-bearing leucogabbro in the middle zone of the intrusion. The apatite-hosted melt inclusions are light to dark brown in color and appear as polygonal, rounded, oval and negative crystal shapes, which range from ～?5 to ～?50 µm in width and from ～?5 to ～?100 µm in length. They have highly variable compositions and show a large and continuous range of SiO₂ and FeO_t with contrasting end-members; one end-member being Fe-rich and Si-poor (40.2 wt% FeO_t and 17.7 wt% SiO₂) and the other being Si-rich and Fe-poor (74.0 wt% SiO₂ and 1.20 wt% FeO_t). This range in composition may be attributed to entrapment of the melt inclusions over a range of temperature and may reflect the presence of µm-scale and immiscible Fe-rich and Si-rich components in different proportions. Simulating results for the motion of Si-rich droplets within a crystal mush indicate that Si-rich droplets would be separated from Fe-rich melt and migrate upward due to density differences in the interstitial liquid when the magma unmixed. Migration of the Si-rich, immiscible liquid component from the interstitial liquid caused the remaining Fe-rich melt in the lower part to react with plagioclase primocrysts (An_59–60), as evidenced by fine-grained lamellar intergrowth of An-rich plagioclase (An_79–84)?+?clinopyroxene in the oxide gabbro of the lower zone. Therefore, magma unmixing within a crystal mush, combined with gravitationally driven loss of the Si-rich component, resulted in the formation of Fe-rich, melagabbro and major Fe–Ti oxide ores in the lower part and Si-rich, leucogabbro in the upper part of the intrusion.     

Bleaching of the post‐IR IRSL signal: new insights for feldspar luminescence dating

Post‐infrared (pIR) stimulated luminescence dating of sedimentary feldspar largely avoids the effects of anomalous fading that affect conventional infrared stimulated luminescence (IRSL) dating. However, optical resetting of pIR signals is more difficult than resetting the conventional IRSL signal, which may undermine the crucial assumption that pIR signals were effectively bleached upon deposition and burial of sediment grains. In this study, we quantify the bleaching properties of several pIR signals on various samples using laboratory‐simulated bleaching in full sunlight and water‐attenuated sunlight. Our data show that bleaching is most efficient under full spectrum conditions for all pIR signals and that pIR signals measured at elevated temperature are increasingly harder to bleach than IR and pIR signals measured at low temperature (e.g. IR at 50°C). All bleaching curves exhibit a very slow and steady decrease, indicating that a fixed un‐bleachable residual level cannot be reached within the 11 days of solar simulator exposure undertaken here. We show that the magnitude of a laboratory‐determined residual dose depends on the adopted bleaching protocol and cannot be used as a proxy for the dose that remains in the sample at the time of burial (remnant dose). Our data emphasize the importance of finding a balance between sufficient signal stability and a minimized contribution of a remnant dose when using pIR procedures for feldspar luminescence dating.     

Re–Os isotope and platinum-group element geochemistry of the Pobei Ni–Cu sulfide-bearing mafic–ultramafic complex in the northeastern part of the Tarim Craton

A number of mafic–ultramafic intrusions that host Ni–Cu sulfide mineralization occur in the northeastern Tarim Craton and the eastern Tianshan Orogenic Belt (NW China). The sulfide-mineralized Pobei mafic–ultramafic complex is located in the northeastern part of the Tarim Craton. The complex is composed of gabbro and olivine gabbro, cut by dunite, wehrlite, and melatroctolite of the Poyi and Poshi intrusions. Disseminated Ni–Cu sulfide mineralization is present towards the base of the ultramafic bodies. The sulfide mineralization is typically low grade (<0.5 wt.% Ni and <2 wt.% S) with low platinum-group element (PGE) concentrations (<24.5 ppb Pt and <69 ppb Pd); the abundance of Cu in 100 % sulfide is 1–8 wt.%, and Ni abundance in 100 % sulfide is typically >4 wt.%. Samples from the Pobei complex have εNd (at 280 Ma) values up to +8.1, consistent with the derivation of the magma from an asthenospheric mantle source. Fo 89.5 mol.% olivine from the ultramafic bodies is consistent with a primitive parental magma. Sulfide-bearing dunite and wehrlite have high Cu/Pd ratios ranging from 24,000 to 218,000, indicating a magma that evolved under conditions of sulfide saturation. The grades of Ni, Cu, and PGE in 100 % sulfide show a strong positive correlation. A model for these variations is proposed where the mantle source of the Pobei magma retained ~0.033 wt.% sulfide during the production of a PGE-depleted parental magma. The parental magma migrated from the mantle to the crust and underwent further S saturation to generate the observed mineralization along with its high Cu/Pd ratio at an R-factor varying from 100 to 1,200. The mineralization at Poshi and Poyi has very high γOs (at 280 Ma) values (+30 to +292) that are negatively correlated with the abundance of Os in 100 % sulfide (5.81–271 ppb) and positively correlated with the Re/Os ratios; this indicates that sulfide saturation was triggered by the assimilation of crustal sulfide with both high γOs and Re/Os ratios. When compared to other Permian mafic–ultramafic intrusions with sulfide mineralization in the East Tianshan, the Poyi and Poshi ultramafic bodies were formed from more primitive magmas, and this helps to explain why the sulfide mineralization has high Ni tenor.     

Mineralogical sources of the buffer capacity in a granite catchment determined by strontium isotopes

The role of different minerals in base cation release and thus the increase of buffering capacity of groundwater against acid deposition is controversially discussed in the literature. The ⁸⁷Sr/⁸⁶Sr ratios and base cation concentration were investigated in whole rock leachates, mineral separates, precipitation, soil solution, groundwater and stream water samples in the Lehstenbach catchment (Germany) to identify the weathering sequence of the granite bedrock. Three different approaches were followed in parallel. It was assumed that the contribution of different minerals to base cation supply of the groundwater with increasing weathering intensity would be observed by investigating (1) unweathered rock leachates, deep groundwater and shallow groundwater, (2) groundwater samples from new groundwater wells, reflecting the initial weathering of the drilled bedrock, and groundwater from wells that were drilled in 1988, (3) stream water during baseflow, dominated by deep groundwater, and stream water during high flow, being predominantly shallow groundwater. Whereas the first approach yielded consistent patterns, there was some evidence that groundwater from the new wells initially reflected contamination by the filter gravel rather than cation release in an initial stage of weathering. Time series samples of stream water and groundwater solute concentrations and isotope ratios turned out to reflect varying fractions of soil water and precipitation water at baseflow and high flow conditions rather than varying contributions of different minerals that prevail at different stages of granite weathering.     

New textural and mineralogical constraints on the origin of the Hongge Fe-Ti-V oxide deposit, SW China

The Hongge magmatic Fe-Ti-V oxide deposit in the Panxi region, SW China, is hosted in a layered mafic–ultramafic intrusion. This 2.7-km-thick, lopolith-like intrusion consists of the lower, middle, and upper zones, which are composed of olivine clinopyroxenite, clinopyroxenite, and gabbro, respectively. Abundant Fe-Ti oxide layers mainly occur in the middle zone and the lower part of the upper zone. Fe-Ti oxides include Cr-rich and Cr-poor titanomagnetite and granular ilmenite. Cr-rich titanomagnetite is commonly disseminated in the olivine clinopyroxenite of the lower parts of the lower and middle zones and contains 1.89 to 14.9 wt% Cr₂O₃ and 3.20 to 16.2 wt% TiO₂, whereas Cr-poor titanomagnetite typically occurs as net-textured and massive ores in the upper middle and upper zones and contains much lower Cr₂O₃ (<0.4 wt%) but more variable TiO₂ (0.11 to 18.2 wt%). Disseminated Cr-rich titanomagnetite in the ultramafic rocks is commonly enclosed in either olivine or clinopyroxene, whereas Cr-poor titanomangetite of the net-textured and massive ores is mainly interstitial to clinopyroxene and plagioclase. The lithology of the Hongge intrusion is consistent with multiple injections of magmas, the lower zone being derived from a single pulse of less differentiated ferrobasaltic magma and the middle and upper zones from multiple pulses of more differentiated magmas. Cr-rich titanomagnetite in the disseminated ores of the lower and middle zones is interpreted to represent an early crystallization phase whereas clusters of Cr-poor titanomagnetite, granular ilmenite, and apatite in the net-textured ores of the middle and upper zones are thought to have formed from an Fe-Ti-(P)-rich melt segregated from a differentiated ferrobasaltic magma as a result of liquid immiscibility. The dense Fe-Ti-(P)-rich melt percolated downward through the underlying silicate crystal mush to form net-textured and massive Fe-Ti oxide ores, whereas the coexisting Si-rich melt formed the overlying plagioclase-rich rocks in the intrusion.     

Isolation,biodegradation ability and molecular detection of hydrocarbon degrading bacteria in petroleum samples from a Brazilian offshore basin

The detection of microorganisms with potential for biodeterioration and biodegradation in petroleum fields is of great relevance, since these organisms may be related to a decrease in petroleum quality in the reservoirs or damage in the production facilities. In this sense, petroleum formation water and oil samples were collected from the Campos Basin, Brazil, with the aim of isolating microorganisms and evaluating their ability to degrade distinct classes of hydrocarbon biomarkers (9,10-dihydrophenanthrene, phytane, nonadecanoic acid and 5α-cholestane). Twenty eight bacterial isolates were recovered and identified by sequencing their 16S rRNA genes. Biodegradation assays revealed that bacterial metabolism of hydrocarbons occurred through reactions based on oxidation, carbon–carbon bond cleavage and generation of new bonds or by the physical incorporation of hydrocarbons into microbial cell walls. Based on the biodegradation results, selective PCR-based systems were developed for direct detection in petroleum samples of bacterial groups of interest, namely Bacillus spp., Micrococcus spp., Achromobacter xylosoxidans, Dietzia spp. and Bacillus pumilus. Primer sets targeting 16S rRNA genes were designed and their specificity was confirmed in silico (i.e. computational analysis) and in PCR reactions using DNA from reference strains as positive and negative controls. Total DNA from oil was purified and the amplification tests revealed the presence of the target bacteria in the samples, unraveling a significant potential for petroleum deterioration in the reservoirs sampled, once proper conditions are present for hydrocarbon degradation. The application of molecular methods for rapid detection of specific microorganisms in environmental samples would be valuable as a supporting tool for the evaluation of oil quality in production reservoirs.     

Refining the ice flow chronology and subglacial dynamics across the migrating Labrador Divide of the Laurentide Ice Sheet with age constraints on deglaciation

The Laurentide Ice Sheet was characterized by a dynamic polythermal base. However, important data and knowledge gaps have led to contrasting reconstructions in areas such as the Labrador Ice Divide. In this study, detailed fieldwork was conducted at the southeastern edge of a major landform boundary to resolve the relative ice flow chronology and constrain the evolution of the subglacial dynamics, including the migration and collapse of the Labrador Ice Divide. Surficial mapping and analysis of 94 outcrop‐scale ice flow indicators were used to develop a relative ice flow chronology. ¹⁰Be exposure ages were used with optical ages to confine the timing of deglaciation within the study area. Four phases of ice flow were identified. Flow 1 was a northeasterly ice flow preserved under non‐erosive subglacial conditions associated with the development of an ice divide. Flow 2 was a northwest ice flow, which we correlate to the Ungava Bay Ice Stream and led to a westward migration of the ice divide, preserving Flow 2 features and resulting in Flow 3's eastward‐trending indicators. Flow 4 is limited to sparse fine striations within and around the regional uplands. The new optical ages and ¹⁰Be exposure ages add to the regional geochronology dataset, which further constrains the timing of ice margin retreat in the area to around 8.0 ka. Copyright © 2019 The Authors. Journal of Quaternary Science Published by John Wiley & Sons Ltd.